Currently mLayerCount for RenderTarget is always updated to the number
of depth for attachments, which incurs unintended behaviors for some
types of textures. i.e., 2d array, cubemap array, and 3d textures.
Fix this by updating mLayerCount only for multiview use case.
BUGS=[369165616]
- Both Scene and IBL are holding on to a skybox reference. We
need to make sure the order they are destroyed in right order.
- Reloading IBL should trigger resetting the indrect light in
gltf_viewer.
Clients can create a multi-layered render target that consists of array
textures, and use it as a custom render target.
A new sample app "hellostereo" demonstrates how to use this feature.
vk, metal and desktop gl all support depth clamp, GLES/android also does
with ANGLE. Add support for it in the backends.
use depth clamp to improve directional shadow quality; this allows
to render everything that's behind the camera at the same "zero" depth,
so we can reduce the depth range we need.
Fixes#6293
vk, metal and desktop gl all support depth clamp, GLES/android also does
with ANGLE. Add support for it in the backends.
use depth clamp to improve directional shadow quality; this allows
to render everything that's behind the camera at the same "zero" depth,
so we can reduce the depth range we need.
Fixes#6293
shadow cascades where not calculated properly because part of the
calculation took the cascade near/far into account, while another
part didn't. This resulted in cascades being too large. It didn't
create wrong shadows, but reduced (and in some case canceled) the
usefulness of the cascade.
We fix the problem by always using the projection matrix only for
describing the cascade's frustum, as opposed to just passing the
near/far plane distances.
Now the calculation of each cascade is completely self contained and
identical.
We also improve the orientation of the light frustum:
We can rotate the light frustum around the light direction axis, so
it aligns with the view direction, this generally result in smaller
light frustums. This cannot be used in stable mode.
- remove deprecated morphing APIs
- repair gltfio, samples and tests
The new API doesn't allow a MorphTargetBuffer per RenderPrimitive,
instead the MorphTargetBuffer is specified per Renderable.
gltfio separates RenderPrimitives from Renderables, in particular all
RenderPrimitives are created before their Renderable; this was
problematic for this change because all primitives must share
a single MorphTargetBuffer living in the Renderable.
To fix this, we're no longer initializing the morphing paramters
at RenderPrimitive creation, instead we store a reference to the
BufferSlot in the Primtive structure, so that later, when the Renderable
is created we can finally retrieve the BufferSlot and initialize its
morphing paramters, which are not available. The "morphing parameters"
are now expanded to contain the MorphTargetBuffer as before (except now
it's always the same for all the primitives of a Rendrable), as well
as the offset within the buffer and the vertex count.
When a user drags and drops a gltf file to the gltf_viewer window, it
loads the new asset.
While this happens, the function `checkAsset` tries parsing the gltf
file, but it doesn't free it. Fix this.
The current API allowed to have a buffer for each primitive in a
renderable. We instead restrict the API so that there is a single
MorphTargetBuffer for the whole renderable, shared by all primitives.
The buffer can be shared thanks to the "offset" parameter on
setMorphTargetBufferAt().
Also
- fix FMorphTargetBuffer::updateDataAt()
- add support for the "offset" parameter of setMorphTargetBufferAt()
- Add option to build.sh to build for paritcular stereo
techniques (default to NONE). Only applies to samples.
- Consoldiate viewer checkbox for debugging stereo rendering
- Add DriverConfig flag for stereoscopic type so that it can
be used to determine availability of the feature and
(to be completed) enable corresponding GPU features.
Co-authored-by: Mathias Agopian <mathias@google.com>
Plumb through multiview configurations to the pipeline so that the
engine draws scenes using multiview extension. Users need to prepare
shaders compiled with the `multiview` param and set the
`stereoscopicType` flag to MULTIVIEW in the Engine::Config to enable
multiview feature.
In this change, postprocessings for multiview are not yet supported. So
we all disable them until they're supported.
The debug option `combineMultiviewImages` combines layers as one image,
which allows us to check the final result.
For reasons unknown, after upgrading to XCode 15.3, dlopen can
no longer find libvulkan.1.dylib. We fix it by explicitly adding
/usr/local/lib to rpath for macos.
we recently added calls to Material::compile in gltfio to precompile
materials are they are discovered. that wasn't a good call, because
this should be the responsibility of the app, not of gltfio, at least
not without an option.
This is now done in gltf_viewer. We need something similar for
Android.
Bugs #7318, #7336
Moving setFrontFaceWindingInverted to MaterialInstance will enable
finer control over face inversion and aligns better with Vulkan's
pipeline definition (see VkGraphicsPipelineCreateInfo).
Drag and dropping a gltf folder was broken:
- the handle didn't find the gltf file on drag&drop
- the ResourceLoader cached the asset path
- don't exit(1) when drag&dropping an invalid file
This change does three main things. First, it adds an option to the Engine
Builder to pick the feature level at which to instantiate Filament. The only
real practical purpose of allowing this is to be able to instantiate at feature
level 0. Secondly, it allows feature level 0 to properly work on non-ES2
devices. Thirdly, it changes both Android and desktop hellotriangle samples to
explicitly opt-in to feature level 0.
Unfortunately, feature levels are used in two different, somewhat contradictory
ways presently in Filament, which can make reasoning about this change a bit
confusing. From a client perspective, feature levels refer to buckets of
capabilities which are guaranteed to be supported. Internally, there is a
separate "feature level" stored internally at the Driver subclass level which
generally corresponds to the maximum supported feature level, but is also
referenced when activating workarounds for limited devices. For example, Uniform
Buffer Objects are not supported in ES2, however, Filament supports emulating
them such that the client does not need to care at all; a supported feature is a
supported feature. But internally, Filament uses this "Driver" feature level to
determine whether or not a given workaround is needed. There were several cases
where the "active feature level" was being examined in order to activate these
workarounds rather than the "driver feature level", which was incorrect.
Why should non-ES2-only devices want to activate feature level 0? Allowing this
behavior 1. makes feature level 0 more consistent with the behavior of other
feature levels and 2. allows clients a layer of validation that their software
will work on all devices supported by Filament if they explicitly opt into it.
Consistency: Filament guarantees that any given device which supports a given
feature level will also support running on every feature level below, except for
feature level 0. This change removes that exception.
Validation: It's not perfect, and there will likely be bugs and unexpected
differences in behavior between ES2 and non-ES2 devices that crop up in the
future between two devices running on the same feature level. However, it's at
least a basic high level layer of validation that enables more rapid testing
workflows directly via desktop versions of Filament rather than having to fiddle
with something like ANGLE to get perfect GLES 2.0 compliance. Additionally, it
expands options for automated testing (with the same caveats).
This change has been tested on both the desktop and Android versions of
hellotriangle.
* debugging PCF mode
This mode always uses a hard PCF and takes a
slightly slower code path.
* dynamic shadowmap visualization
The directional shadowmap visualizer is implemented behind a
specialization constant. Add the DebugRegistry infrastructure to be
able to update the spec-constant at runtime and have a subset of
all materials invalidated.
This allows to toggle the visualization at runtime using a debug
property.
This is also a proof of concept that we can update spec-constants
at runtime; we could probably leverage this work for engine-wide
shader configurations.
* Update main.fs
* Update filament/src/details/Material.cpp
Co-authored-by: Powei Feng <powei@google.com>
---------
Co-authored-by: Powei Feng <powei@google.com>
- shadows are now stable (in stable mode) when an IBL rotation is
used.
- fix the shadow transform option which didn't work when an IBL rotation
was used
- also use the x-axis as a reference for the "up" direction when
computing the light space matrix so that we don't fall into the
degenerate case when the light points straight down, which is a
common case
FIXES=[299310624]
* Add skinning and morphing samples to check functionality
* Implement skinning for more than four bones pair vertex
The API allows defining an unlimited number of bone indices and weights of primitives. Data is defined in building process of the renderable manager. Backward compatibility with the original solution.
Skinning of vertices is calculated on GPU, data is transferred to the vertex shader in the texture.
Functionally this shouldn't be too different, but we have some
improvements:
- better detection of "no shadows" cases
- more computations done in light-space, which should result in
better light frustum.
- spit the code into several static functions
- use the geometric normal to apply the shadow bias. This affects
cascades > 0 and spot/point lights.
- use the scene's origin as a reference point for stabilizing the
shadowmap, this is more robust.
- clamp directional shadowmap correctly to the 1-texel border, which
needs to be reachable, as it is a valid value.
- don't snap the shadowmap to texel boundaries if stable mode is not
active (before we only didn't do it based on lispsm). Stable mode can
make the shadow unstable when both the camera and the scene move
together, so it's better to have a more predictable API where
"stable" mode means that the snapping occurs and doesn't otherwise.
- add "far origin" distance slider to the debug ui
FIXES=[299310624]
this is implemented by here by using the skybox texture and blurring it
with the irradiance filter + mipmapping. This only creates a subtle
anisotropic phase-function effect.
This works by making the fog an entity which can be used to create
a TransformManager component an participate to the transform hierarchy.
This feature can be used as more advanced way to set the fog's floor,
which now can have an orientation (essentially be a plane).
This is useful for coordinate systems that are not y-up.
- -m option now works with "directory_*.png" or just "*.png"
- "color" replaced by "albedo" to mach other places in the source tree
- fixed warnings
- clear the background when IBL is not used
