* Share the diagnostic-position setter of the DOM SAX parsers
json_sax_dom_parser and json_sax_dom_callback_parser each had a private
copy of handle_diagnostic_positions_for_json_value(), identical except
for comments. Move the body into one static member function,
detail::diagnostic_positions::set_from_lexer(value, lexer), which both
classes call with their lexer pointer. basic_json befriends the new
struct (only when JSON_DIAGNOSTIC_POSITIONS is enabled), as the position
members are private.
The discarded case is reached through the callback parser, so the
LCOV_EXCL markers that only the dom parser's copy had are gone. The
NOLINT on the unreachable default case loses the stray
"-warnings-as-errors", which is not a check name.
The start-position setup in start_object()/start_array() is left alone,
as #5706 is editing the callback parser's versions.
Behavior, the public API and the ABI are unchanged.
Part of #5712
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Correct the parser comments on recursion and skip_to_state_evaluation
The class documentation called the parser a recursive descent parser,
but sax_parse_internal() is a loop that keeps the open containers on an
explicit stack. The comment at the end of an array and of an object
said the flag is set to false while the code below it sets it to true.
Describe what the code does instead.
Comments only; behavior, the public API and the ABI are unchanged.
Part of #5712
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Update the discard_number_values comments to the current number path
The comments explaining the accept() shortcut in convert_number() and
the member documentation still argued in terms of strtoull()/strtoll()
and errno, which #5283 replaced with convert_integer(), and pointed at
scan_number() instead of convert_number(). They also did not say that
scan_number_bulk_contiguous() converts integers itself, so the shortcut
is only reached for input without bulk access, with
JSON_DIAGNOSTIC_POSITIONS, or when the bulk scanner falls back.
Rewrite both comments to describe the digit-count check in front of
convert_integer(), keeping the 18-digit bound and the json_sax_acceptor
argument. The stale <cstdlib> comment is left for after #5616, which
edits that include block.
Comments only; behavior, the public API and the ABI are unchanged.
Part of #5712
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* List the UTF-8 validators instead of calling the DFA the only one
The documentation of decode() called the Hoehrmann DFA the single
source of truth for UTF-8 validation. It is used only by the serializer
and by is_valid_utf8() (CBOR/MessagePack/BSON/UBJSON/BJData text
strings). The lexer's scan_string() switch, validate_one_utf8() /
valid_utf8_prefix() (bulk string scan, BON8 bulk path and BON8 writer)
and the BON8 byte path in get_bon8_string() check the RFC 3629 ranges
on their own.
Replace the sentence with a list of the four validators, what each is
used for, and a note that they must accept the same sequences. Sharing
code between them was considered and dropped: it would save a few lines
in a validator that is entangled with BON8 pushback, and #5677 is
editing the BON8 byte path.
Comments only; behavior, the public API and the ABI are unchanged.
Part of #5712
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Fix stale doc comments and include lists in the input headers
input_adapters.hpp included <memory> and <numeric> for the removed
shared_ptr-based adapter design but used neither; it called
(std::min) without including <algorithm>. json_sax.hpp used
std::numeric_limits without including <limits>. Also corrected
comments that no longer matched the code: input_stream_adapter does
not skip the input's BOM (the lexer's skip_bom() does), the
span_input_adapter comment named the no-longer-existing
input_buffer_adapter type, lexer::get_string() does not reset the
token, binary_reader's get_number() doc opened with /* instead of
/*! (so Doxygen skipped it) and omitted BON8 from its endianness
note, and the UBJSON-binary-types note did not mention that BJData
'B' arrays are read as binary.
Left out: the lgtm suppression on lexer.hpp's scan_number() (in
#5616's hunk) and the "-1 if unknown" wording in json_sax.hpp's
start_object/start_array docs (in draft #5267's hunk), per the
verdict's conflict list.
Part of #5712
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Deduplicate the strict-EOF/release_lookahead/error block in parser::parse()
json_sax_dom_callback_parser and json_sax_dom_parser branches of
parser::parse() ran the same ~25 lines after sax_parse_internal():
the strict-mode EOF check (raising parse_error.101 through the SAX
parser), release_lookahead() in non-strict mode, and mapping an
errored SAX parser to a discarded result. The two copies had already
drifted apart in formatting and in the second copy's "see above"
comment.
Add a private parse_dom(DomSax&, strict) member that runs this shared
sequence once and returns whether the SAX parser did not error; both
branches of parse() now only construct their DOM SAX parser, call
parse_dom(), and (for the callback parser) map a discarded top-level
value to null. sax_parse() is left untouched, since it only runs the
EOF check and release_lookahead() when sax_parse_internal() succeeded,
unlike parse(), which runs them unconditionally.
Behavior-preserving: same operations in the same order for both SAX
parser kinds. Verified with unit-class_parser (strict/non-strict,
callback and non-callback), unit-deserialization and
unit-disabled_exceptions (JSON_NOEXCEPTION), plus a clean
make amalgamate / make check-amalgamation diff.
Overlaps #5601, which touches the same lines.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
#5712 item 2
* Share the code point to UTF-8 encoding between the wide-string helpers and the lexer
The 1/2/3/4-byte UTF-8 encoding ladder was written out by hand three
times: in wide_string_input_helper<..., 4>::fill_buffer() for a UTF-32
code point, in the UTF-16 helper for both a BMP code unit and a valid
surrogate pair, and in the lexer's \uXXXX/\uXXXX\uYYYY handling. The
copies had drifted: the UTF-32 helper masked the leading bits of each
byte (& 0x1Fu, & 0x0Fu, & 0x07u) where the others relied on the shift
alone, even though both give the same result for a code point that is
already known to be in range.
Add detail::encode_utf8(cp, out) in string_utils.hpp, a single encoder
that invokes a callable once per output byte, most significant byte
first. Use it in the three valid-code-point branches (UTF-32 code
points up to U+10FFFF, UTF-16 code units outside the surrogate range,
and valid UTF-16 surrogate pairs) and in the lexer's \u handling, where
out forwards to add(). The UTF-16 helper's deliberate pass-through of
malformed surrogate units and the UTF-32 helper's 0xFF sentinel for
code points above U+10FFFF are untouched, since neither reaches the new
helper.
Behavior-preserving: same bytes in the same order for every valid code
point, verified with unit-class_lexer, unit-class_parser,
unit-deserialization, unit-wstring and the non-test-data parts of
unit-unicode1..5 (ASan/UBSan, C++11/17/20), and an escape-heavy parse
microbenchmark that shows no change (about 73 ms either way, median of
3, 1M escape sequences). single_include/ regenerated with make
amalgamate; make check-amalgamation leaves a clean tree.
Overlaps #5704, which rewrites the wide_string_input_helper
specializations touched here.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
#5712 item 6
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* docs: qualify the operator>> stream positioning guarantee
operator>>'s notes state that it leaves the stream positioned right
after the parsed value, so that concatenated JSON values can be read
back to back. That does not hold when the value is a number: a number
is only terminated by the character that follows it, and the lexer's
unget() is simulated (it rewinds only the lexer's own bookkeeping),
so that character stays consumed from the stream.
Document the actual behaviour: the guarantee holds for all value types
except numbers, which must be followed by whitespace. Also qualify the
cross-reference on the JSON Lines page, which repeated the unqualified
claim.
Documentation only; the behaviour itself is tracked in #5340.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* fix: restore the character that terminates a number (#5340)
operator>> is documented to leave the stream positioned right after the
parsed value, so that concatenated JSON values can be read back to back.
That did not hold for numbers: a number is only terminated by the
character following it, and lexer::scan_number() reads that character
and calls unget() -- which is simulated and rewinds only the lexer's own
bookkeeping. input_stream_adapter consumes via sbumpc() with no matching
sungetc(), so the terminating character stayed consumed and the next
extraction started one byte too late ('1true' left the stream at 'rue').
Propagating unget() to the adapter directly does not work: next_unget
makes the following get() replay the cached character, so the terminator
would be delivered twice. Instead, restore the still-pending character
once at the end of a non-strict parse, where the input is handed back to
the caller:
- input_stream_adapter gains unget_character() (sungetc()) and advertises
it via supports_unget, detected the same way as supports_seek.
- lexer::restore_pending_unget() turns a pending simulated unget of a
real (non-EOF) character into a real one and clears next_unget so the
character is not also replayed. It is a no-op for adapters that cannot
unget, and reports failure when sungetc() fails, in which case the
input is left as it was before.
- parser calls it on the three non-strict paths, i.e. for operator>> and
sax_parse(strict = false).
Strict parse()/accept() are unaffected: they require the input to end
after the value, so the character is consumed by the end-of-input check
anyway. Parse error messages and reported positions are unchanged.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* tests: fix CI failures in the #5340 test helpers
Four CI failures, all in the new test code:
- GCC (-Werror=useless-cast): drop the `json(...)` wrapper around
`json::parse(...)`, which already returns a `json`.
- GCC (-Werror=unused-result): assign the discarded `json::parse()`
result to a dummy, the idiom used elsewhere in the test suite, and
catch `json::parse_error&` for consistency.
- clang-tidy (google-default-arguments): remove the default argument
from the `pbackfail()` override; `sungetc()` supplies the base
declaration's default.
- MSVC (bad allocation): `no_putback_streambuf::underflow()` set a
one-character get area without advancing `m_pos`, so an implementation
whose `istream::get` peeks before it bumps re-read the same character
forever. Keep no get area at all: `underflow()` peeks, `uflow()`
consumes, and `sungetc()` still always lands in `pbackfail()`, which
is what the test needs.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* fix: leave the character that terminates a number in the input
Read the character following a number without consuming it, instead of
consuming it and putting it back. input_stream_adapter now peeks with
sgetc() and only steps over the character when the next one is requested
or when the adapter is destroyed, so releasing it cannot fail - no
putback position is required from the streambuf.
Suggested by gregmarr in #5344.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* docs: match the version history wording to the peek-based fix
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* docs: drop the whitespace-separator caveat from the parsing pages
The caveat added in #5343 describes the behavior this branch fixes: a
number no longer consumes the character that terminates it, so
concatenated values need no separator.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* refactor: split the strict and non-strict paths in parser
Folding the release_lookahead() call into the existing strict check left
the "in strict mode" comment on an else-if branch, and made the strict
condition in sax_parse() redundant with the branch it followed.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Put the stream position fix behind JSON_PRECISE_STREAM_POSITION
Leaving the character that terminates a number in the stream is observable:
reading "1,2,3" with repeated operator>> works today only because the comma
after each number is swallowed, and std::getline after a number skips the
line break. Both break with the fix, so make it opt-in for 3.x, as suggested
by @gregmarr in the review.
- JSON_PRECISE_STREAM_POSITION (default 0) selects the peek-based
input_stream_adapter. Without it, the adapter is the consuming one from
develop and has no supports_lookahead, so lexer::release_lookahead() and
the parser's calls to it compile to nothing.
- The macro changes input_stream_adapter's layout and member functions, so
it gets the ABI tag _psp, after _bics. The ABI config tests, the natvis
generator, and nlohmann_json.natvis (regenerated) know the tag.
- The tests for the fix move to unit-precise-stream-position.cpp, which
defines the macro itself and runs in every build, and gain the two cases
above. unit-deserialization.cpp pins the default behavior instead.
- The docs describe the default behavior again and point to the new macro
page; version history says "added in 3.13.0, planned default in 4.0.0".
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Skip integer conversion in accept()/SAX validation when the value is unused
lexer::scan_number() always converted every numeric token with
strtoull()/strtoll() before returning, even though accept() (and any
consumer using json_sax_acceptor) immediately discards the converted
value. For value_unsigned/value_integer tokens whose digit count
already guarantees the value fits into 64 bits, the conversion cannot
change the accept/reject decision (such tokens are always finite and
unconditionally accepted), so scan_number() can skip strtoull()/
strtoll() entirely in that case when the caller signals it does not
need the value. Numbers with more digits keep using the exact,
unmodified conversion path, so overflow reclassification to
value_float (and the finiteness check on it) is unaffected.
parse() and value_float handling are completely unchanged.
Fixes#5411
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Document why the digit-count fast path is safe regardless of number_unsigned_t/number_integer_t width
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Avoid temporary-string concatenation flagged by clang-tidy in the differential test
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Add implementation to retrieve start and end positions of json during parse
* Add more unit tests and add start/stop parsing for arrays
* Add raw value for all types
* Add more tests and fix compiler warning
* Amalgamate
* Fix CLang GCC warnings
* Fix error in build
* Style using astyle 3.1
* Fix whitespace changes
* revert
* more whitespace reverts
* Address PR comments
* Fix failing issues
* More whitespace reverts
* Address remaining PR comments
* Address comments
* Switch to using custom base class instead of default basic_json
* Adding a basic using for a json using the new base class. Also address PR comments and fix CI failures
* Address decltype comments
* Diagnostic positions macro (#4)
Co-authored-by: Sush Shringarputale <sushring@linux.microsoft.com>
* Fix missed include deletion
* Add docs and address other PR comments (#5)
* Add docs and address other PR comments
---------
Co-authored-by: Sush Shringarputale <sushring@linux.microsoft.com>
* Address new PR comments and fix CI tests for documentation
* Update documentation based on feedback (#6)
---------
Co-authored-by: Sush Shringarputale <sushring@linux.microsoft.com>
* Address std::size_t and other comments
* Fix new CI issues
* Fix lcov
* Improve lcov case with update to handle_diagnostic_positions call for discarded values
* Fix indentation of LCOV_EXCL_STOP comments
* fix amalgamation astyle issue
---------
Co-authored-by: Sush Shringarputale <sushring@linux.microsoft.com>
* Add versioned inline namespace
Add a versioned inline namespace to prevent ABI issues when linking code
using multiple library versions.
* Add namespace macros
* Encode ABI information in inline namespace
Add _diag suffix to inline namespace if JSON_DIAGNOSTICS is enabled, and
_ldvcmp suffix if JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON is enabled.
* Move ABI-affecting macros into abi_macros.hpp
* Move std_fs namespace definition into std_fs.hpp
* Remove std_fs namespace from unit test
* Format more files in tests directory
* Add unit tests
* Update documentation
* Fix GDB pretty printer
* fixup! Add namespace macros
* Derive ABI prefix from NLOHMANN_JSON_VERSION_*
* Make exception context optional
Change exception context parameter to pointer and replace context with
nullptr where appropriate.
* Support escaping other string types
* Add string concatenation function
Add variadic concat() function for concatenating char *, char, and
string types.
* Replace string concatenations using + with concat()
* Template json_pointer on string type
Change json_pointer from being templated on basic_json to being
templated on string type.
* Add unit test for #3388Closes#3388.
* Fix regression test for #2958
* Add backwards compatibility with json_pointer<basic_json>
* Update json_pointer docs
* Allow comparing different json_pointers
* Update version numbers
