mirror of
https://github.com/nlohmann/json.git
synced 2026-10-08 09:55:17 +00:00
* Check in the fuzzers that parsing without exceptions agrees Each fuzzer driver now also parses its input with allow_exceptions = false. That call must never throw a parse_error, must return a discarded value where parsing with exceptions fails, and must return the same value where it succeeds. Values are compared by their dump(), because NaN is not equal to itself. A plain !is_discarded() assertion, as suggested in #3642, would never fail: the drivers parse with exceptions, so a result can never be discarded. tests/fuzzing.md describes the checks and notes that OSS-Fuzz and CIFuzz already run LeakSanitizer, because their default address sanitizer includes it. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Use JSON_HAS_RANGE_VIEW_CONVERSION in the range view regression tests #5728 combined the JSON_HAS_RANGES and MinGW conditions into JSON_HAS_RANGE_VIEW_CONVERSION, but three test guards still spelled them out. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Test the serializer's buffers at their boundaries The dump() indent overflow survived full line coverage because the tests grew its buffer by only one step. This adds tests that land exactly on, and one past, the limits of the other two serializer buffers: - write_buffer (1024 bytes): strings of 1023, 1024 and 1025 bytes at the top level, and of 1022 and 1023 bytes inside an array, so that both guards in put_string() are hit at their boundary. Each is checked for dump() and for stream output. - string_buffer (512 bytes, flushed when fewer than 13 bytes remain): runs of two-byte escapes, and a surrogate pair written with 14 bytes of room, right after a flush, and one escape later. - The 8-byte bulk scan from the serializer side: 0 to 17 plain bytes followed by a quote, a control character, or a non-ASCII character. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Test the chunked string and binary reads of all binary formats The binary readers read strings and binary values in chunks of 4096 bytes. Only CBOR tested lengths around that size. MessagePack, UBJSON, BJData and BSON now round-trip lengths 0, 1, 4095, 4096, 4097, 8192 and 100000 from vector and pointer input, and must report a truncated payload as a parse error. UBJSON reads binary values as arrays of numbers, so it is tested with strings only. BJData binary values reach the chunked read only in Draft 3. BON8 decodes strings byte by byte and does not use this path. Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me>
3351 lines
150 KiB
C++
3351 lines
150 KiB
C++
// __ _____ _____ _____
|
|
// __| | __| | | | JSON for Modern C++ (supporting code)
|
|
// | | |__ | | | | | | version 3.12.0
|
|
// |_____|_____|_____|_|___| https://github.com/nlohmann/json
|
|
//
|
|
// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
|
|
// SPDX-License-Identifier: MIT
|
|
|
|
#include "doctest_compatibility.h"
|
|
|
|
// capture whether JSON_DELETE_DEPRECATED_FUNCTIONS was enabled on the command
|
|
// line *before* including json.hpp, since the library #undefs it once the header
|
|
// has been fully processed (see include/nlohmann/detail/macro_unscope.hpp); the
|
|
// tests of deprecated functions are skipped if these functions are deleted
|
|
#if defined(JSON_DELETE_DEPRECATED_FUNCTIONS) && (JSON_DELETE_DEPRECATED_FUNCTIONS == 1)
|
|
#define JSON_TEST_DEPRECATED_FUNCTIONS_DELETED
|
|
#endif
|
|
|
|
#include <nlohmann/json.hpp>
|
|
using nlohmann::json;
|
|
|
|
#include <iostream>
|
|
#include <fstream>
|
|
#include <set>
|
|
#include "make_test_data_available.hpp"
|
|
#include "round_trip_corpus.hpp"
|
|
#include "test_utils.hpp"
|
|
#include "sax_countdown.hpp"
|
|
using utils::SaxCountdown;
|
|
|
|
|
|
TEST_CASE("UBJSON")
|
|
{
|
|
SECTION("individual values")
|
|
{
|
|
SECTION("discarded")
|
|
{
|
|
// a discarded value cannot be serialized to UBJSON
|
|
json const j = json::value_t::discarded;
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j), "[json.exception.type_error.321] cannot serialize discarded value to UBJSON", json::type_error&);
|
|
}
|
|
|
|
SECTION("discarded values nested in a container")
|
|
{
|
|
json const discarded = json::value_t::discarded;
|
|
|
|
SECTION("in an array")
|
|
{
|
|
json const j = {1, discarded, 2};
|
|
#if JSON_DIAGNOSTICS
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j), "[json.exception.type_error.321] (/1) cannot serialize discarded value to UBJSON", json::type_error&);
|
|
#else
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j), "[json.exception.type_error.321] cannot serialize discarded value to UBJSON", json::type_error&);
|
|
#endif
|
|
}
|
|
|
|
SECTION("as an object value")
|
|
{
|
|
json j;
|
|
j["a"] = 1;
|
|
j["b"] = discarded;
|
|
#if JSON_DIAGNOSTICS
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j), "[json.exception.type_error.321] (/b) cannot serialize discarded value to UBJSON", json::type_error&);
|
|
#else
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j), "[json.exception.type_error.321] cannot serialize discarded value to UBJSON", json::type_error&);
|
|
#endif
|
|
}
|
|
|
|
SECTION("nested deeper (array in object in array)")
|
|
{
|
|
json inner_array = {1, discarded};
|
|
json middle_object;
|
|
middle_object["x"] = inner_array;
|
|
json const j = {middle_object};
|
|
#if JSON_DIAGNOSTICS
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j), "[json.exception.type_error.321] (/0/x/1) cannot serialize discarded value to UBJSON", json::type_error&);
|
|
#else
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j), "[json.exception.type_error.321] cannot serialize discarded value to UBJSON", json::type_error&);
|
|
#endif
|
|
}
|
|
|
|
SECTION("optimized array of all-discarded elements")
|
|
{
|
|
json const j = {discarded, discarded};
|
|
#if JSON_DIAGNOSTICS
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j, true, true), "[json.exception.type_error.321] (/0) cannot serialize discarded value to UBJSON", json::type_error&);
|
|
#else
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j, true, true), "[json.exception.type_error.321] cannot serialize discarded value to UBJSON", json::type_error&);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
SECTION("null")
|
|
{
|
|
json const j = nullptr;
|
|
std::vector<uint8_t> expected = {'Z'};
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("boolean")
|
|
{
|
|
SECTION("true")
|
|
{
|
|
json const j = true;
|
|
std::vector<uint8_t> const expected = {'T'};
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("false")
|
|
{
|
|
json const j = false;
|
|
std::vector<uint8_t> const expected = {'F'};
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("number")
|
|
{
|
|
SECTION("signed")
|
|
{
|
|
SECTION("-9223372036854775808..-2147483649 (int64)")
|
|
{
|
|
std::vector<int64_t> const numbers
|
|
{
|
|
(std::numeric_limits<int64_t>::min)(),
|
|
-1000000000000000000LL,
|
|
-100000000000000000LL,
|
|
-10000000000000000LL,
|
|
-1000000000000000LL,
|
|
-100000000000000LL,
|
|
-10000000000000LL,
|
|
-1000000000000LL,
|
|
-100000000000LL,
|
|
-10000000000LL,
|
|
-2147483649LL,
|
|
};
|
|
for (auto i : numbers)
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with integer number
|
|
json const j = i;
|
|
|
|
// check type
|
|
CHECK(j.is_number_integer());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
static_cast<uint8_t>('L'),
|
|
static_cast<uint8_t>((i >> 56) & 0xff),
|
|
static_cast<uint8_t>((i >> 48) & 0xff),
|
|
static_cast<uint8_t>((i >> 40) & 0xff),
|
|
static_cast<uint8_t>((i >> 32) & 0xff),
|
|
static_cast<uint8_t>((i >> 24) & 0xff),
|
|
static_cast<uint8_t>((i >> 16) & 0xff),
|
|
static_cast<uint8_t>((i >> 8) & 0xff),
|
|
static_cast<uint8_t>(i & 0xff),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 9);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'L');
|
|
int64_t const restored = (static_cast<int64_t>(result[1]) << 070) +
|
|
(static_cast<int64_t>(result[2]) << 060) +
|
|
(static_cast<int64_t>(result[3]) << 050) +
|
|
(static_cast<int64_t>(result[4]) << 040) +
|
|
(static_cast<int64_t>(result[5]) << 030) +
|
|
(static_cast<int64_t>(result[6]) << 020) +
|
|
(static_cast<int64_t>(result[7]) << 010) +
|
|
static_cast<int64_t>(result[8]);
|
|
CHECK(restored == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("-2147483648..-32769 (int32)")
|
|
{
|
|
std::vector<int32_t> numbers;
|
|
numbers.push_back(-32769);
|
|
numbers.push_back(-100000);
|
|
numbers.push_back(-1000000);
|
|
numbers.push_back(-10000000);
|
|
numbers.push_back(-100000000);
|
|
numbers.push_back(-1000000000);
|
|
numbers.push_back(-2147483647 - 1); // https://stackoverflow.com/a/29356002/266378
|
|
for (auto i : numbers)
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with integer number
|
|
json const j = i;
|
|
|
|
// check type
|
|
CHECK(j.is_number_integer());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
static_cast<uint8_t>('l'),
|
|
static_cast<uint8_t>((i >> 24) & 0xff),
|
|
static_cast<uint8_t>((i >> 16) & 0xff),
|
|
static_cast<uint8_t>((i >> 8) & 0xff),
|
|
static_cast<uint8_t>(i & 0xff),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 5);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'l');
|
|
int32_t const restored = (static_cast<int32_t>(result[1]) << 030) +
|
|
(static_cast<int32_t>(result[2]) << 020) +
|
|
(static_cast<int32_t>(result[3]) << 010) +
|
|
static_cast<int32_t>(result[4]);
|
|
CHECK(restored == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("-32768..-129 (int16)")
|
|
{
|
|
for (int32_t i = -32768; i <= -129; i = utils::next_integer_sample(i, -129, 7))
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with integer number
|
|
json const j = i;
|
|
|
|
// check type
|
|
CHECK(j.is_number_integer());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
static_cast<uint8_t>('I'),
|
|
static_cast<uint8_t>((i >> 8) & 0xff),
|
|
static_cast<uint8_t>(i & 0xff),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 3);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'I');
|
|
auto const restored = static_cast<int16_t>(((result[1] << 8) + result[2]));
|
|
CHECK(restored == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("-9263 (int16)")
|
|
{
|
|
json const j = -9263;
|
|
std::vector<uint8_t> expected = {'I', 0xdb, 0xd1};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 3);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'I');
|
|
auto const restored = static_cast<int16_t>(((result[1] << 8) + result[2]));
|
|
CHECK(restored == -9263);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("-128..-1 (int8)")
|
|
{
|
|
for (auto i = -128; i <= -1; ++i)
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with integer number
|
|
json const j = i;
|
|
|
|
// check type
|
|
CHECK(j.is_number_integer());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
'i',
|
|
static_cast<uint8_t>(i),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 2);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'i');
|
|
CHECK(static_cast<int8_t>(result[1]) == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("0..127 (int8)")
|
|
{
|
|
for (size_t i = 0; i <= 127; ++i)
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with integer number
|
|
json j = -1;
|
|
j.get_ref<json::number_integer_t&>() = static_cast<json::number_integer_t>(i);
|
|
|
|
// check type
|
|
CHECK(j.is_number_integer());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
static_cast<uint8_t>('i'),
|
|
static_cast<uint8_t>(i),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 2);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'i');
|
|
CHECK(result[1] == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("128..255 (uint8)")
|
|
{
|
|
for (size_t i = 128; i <= 255; ++i)
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with integer number
|
|
json j = -1;
|
|
j.get_ref<json::number_integer_t&>() = static_cast<json::number_integer_t>(i);
|
|
|
|
// check type
|
|
CHECK(j.is_number_integer());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
static_cast<uint8_t>('U'),
|
|
static_cast<uint8_t>(i),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 2);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'U');
|
|
CHECK(result[1] == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("256..32767 (int16)")
|
|
{
|
|
for (size_t i = 256; i <= 32767; i = utils::next_integer_sample(i, static_cast<size_t>(32767), static_cast<size_t>(7)))
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with integer number
|
|
json j = -1;
|
|
j.get_ref<json::number_integer_t&>() = static_cast<json::number_integer_t>(i);
|
|
|
|
// check type
|
|
CHECK(j.is_number_integer());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
static_cast<uint8_t>('I'),
|
|
static_cast<uint8_t>((i >> 8) & 0xff),
|
|
static_cast<uint8_t>(i & 0xff),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 3);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'I');
|
|
auto const restored = static_cast<uint16_t>((static_cast<uint8_t>(result[1]) * 256) + static_cast<uint8_t>(result[2]));
|
|
CHECK(restored == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("65536..2147483647 (int32)")
|
|
{
|
|
for (uint32_t i :
|
|
{
|
|
65536u, 77777u, 1048576u
|
|
})
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with integer number
|
|
json j = -1;
|
|
j.get_ref<json::number_integer_t&>() = static_cast<json::number_integer_t>(i);
|
|
|
|
// check type
|
|
CHECK(j.is_number_integer());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
'l',
|
|
static_cast<uint8_t>((i >> 24) & 0xff),
|
|
static_cast<uint8_t>((i >> 16) & 0xff),
|
|
static_cast<uint8_t>((i >> 8) & 0xff),
|
|
static_cast<uint8_t>(i & 0xff),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 5);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'l');
|
|
uint32_t const restored = (static_cast<uint32_t>(result[1]) << 030) +
|
|
(static_cast<uint32_t>(result[2]) << 020) +
|
|
(static_cast<uint32_t>(result[3]) << 010) +
|
|
static_cast<uint32_t>(result[4]);
|
|
CHECK(restored == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("2147483648..9223372036854775807 (int64)")
|
|
{
|
|
std::vector<uint64_t> const v = {2147483648ul, 9223372036854775807ul};
|
|
for (uint64_t i : v)
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with integer number
|
|
json j = -1;
|
|
j.get_ref<json::number_integer_t&>() = static_cast<json::number_integer_t>(i);
|
|
|
|
// check type
|
|
CHECK(j.is_number_integer());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
'L',
|
|
static_cast<uint8_t>((i >> 070) & 0xff),
|
|
static_cast<uint8_t>((i >> 060) & 0xff),
|
|
static_cast<uint8_t>((i >> 050) & 0xff),
|
|
static_cast<uint8_t>((i >> 040) & 0xff),
|
|
static_cast<uint8_t>((i >> 030) & 0xff),
|
|
static_cast<uint8_t>((i >> 020) & 0xff),
|
|
static_cast<uint8_t>((i >> 010) & 0xff),
|
|
static_cast<uint8_t>(i & 0xff),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 9);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'L');
|
|
uint64_t const restored = (static_cast<uint64_t>(result[1]) << 070) +
|
|
(static_cast<uint64_t>(result[2]) << 060) +
|
|
(static_cast<uint64_t>(result[3]) << 050) +
|
|
(static_cast<uint64_t>(result[4]) << 040) +
|
|
(static_cast<uint64_t>(result[5]) << 030) +
|
|
(static_cast<uint64_t>(result[6]) << 020) +
|
|
(static_cast<uint64_t>(result[7]) << 010) +
|
|
static_cast<uint64_t>(result[8]);
|
|
CHECK(restored == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
}
|
|
|
|
SECTION("unsigned")
|
|
{
|
|
SECTION("0..127 (int8)")
|
|
{
|
|
for (size_t i = 0; i <= 127; ++i)
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with unsigned integer number
|
|
json const j = i;
|
|
|
|
// check type
|
|
CHECK(j.is_number_unsigned());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
'i',
|
|
static_cast<uint8_t>(i),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 2);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'i');
|
|
auto const restored = static_cast<uint8_t>(result[1]);
|
|
CHECK(restored == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("128..255 (uint8)")
|
|
{
|
|
for (size_t i = 128; i <= 255; ++i)
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with unsigned integer number
|
|
json const j = i;
|
|
|
|
// check type
|
|
CHECK(j.is_number_unsigned());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
'U',
|
|
static_cast<uint8_t>(i),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 2);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'U');
|
|
auto const restored = static_cast<uint8_t>(result[1]);
|
|
CHECK(restored == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("256..32767 (int16)")
|
|
{
|
|
for (size_t i = 256; i <= 32767; i = utils::next_integer_sample(i, static_cast<size_t>(32767), static_cast<size_t>(7)))
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with unsigned integer number
|
|
json const j = i;
|
|
|
|
// check type
|
|
CHECK(j.is_number_unsigned());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
'I',
|
|
static_cast<uint8_t>((i >> 8) & 0xff),
|
|
static_cast<uint8_t>(i & 0xff),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 3);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'I');
|
|
auto const restored = static_cast<uint16_t>((static_cast<uint8_t>(result[1]) * 256) + static_cast<uint8_t>(result[2]));
|
|
CHECK(restored == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("65536..2147483647 (int32)")
|
|
{
|
|
for (uint32_t i :
|
|
{
|
|
65536u, 77777u, 1048576u
|
|
})
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with unsigned integer number
|
|
json const j = i;
|
|
|
|
// check type
|
|
CHECK(j.is_number_unsigned());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
'l',
|
|
static_cast<uint8_t>((i >> 24) & 0xff),
|
|
static_cast<uint8_t>((i >> 16) & 0xff),
|
|
static_cast<uint8_t>((i >> 8) & 0xff),
|
|
static_cast<uint8_t>(i & 0xff),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 5);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'l');
|
|
uint32_t const restored = (static_cast<uint32_t>(result[1]) << 030) +
|
|
(static_cast<uint32_t>(result[2]) << 020) +
|
|
(static_cast<uint32_t>(result[3]) << 010) +
|
|
static_cast<uint32_t>(result[4]);
|
|
CHECK(restored == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("2147483648..9223372036854775807 (int64)")
|
|
{
|
|
std::vector<uint64_t> const v = {2147483648ul, 9223372036854775807ul};
|
|
for (uint64_t i : v)
|
|
{
|
|
CAPTURE(i)
|
|
|
|
// create JSON value with integer number
|
|
json const j = i;
|
|
|
|
// check type
|
|
CHECK(j.is_number_unsigned());
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> const expected
|
|
{
|
|
'L',
|
|
static_cast<uint8_t>((i >> 070) & 0xff),
|
|
static_cast<uint8_t>((i >> 060) & 0xff),
|
|
static_cast<uint8_t>((i >> 050) & 0xff),
|
|
static_cast<uint8_t>((i >> 040) & 0xff),
|
|
static_cast<uint8_t>((i >> 030) & 0xff),
|
|
static_cast<uint8_t>((i >> 020) & 0xff),
|
|
static_cast<uint8_t>((i >> 010) & 0xff),
|
|
static_cast<uint8_t>(i & 0xff),
|
|
};
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == 9);
|
|
|
|
// check individual bytes
|
|
CHECK(result[0] == 'L');
|
|
uint64_t const restored = (static_cast<uint64_t>(result[1]) << 070) +
|
|
(static_cast<uint64_t>(result[2]) << 060) +
|
|
(static_cast<uint64_t>(result[3]) << 050) +
|
|
(static_cast<uint64_t>(result[4]) << 040) +
|
|
(static_cast<uint64_t>(result[5]) << 030) +
|
|
(static_cast<uint64_t>(result[6]) << 020) +
|
|
(static_cast<uint64_t>(result[7]) << 010) +
|
|
static_cast<uint64_t>(result[8]);
|
|
CHECK(restored == i);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
}
|
|
|
|
SECTION("float64")
|
|
{
|
|
SECTION("3.1415925")
|
|
{
|
|
double v = 3.1415925;
|
|
json const j = v;
|
|
std::vector<uint8_t> expected =
|
|
{
|
|
'D', 0x40, 0x09, 0x21, 0xfb, 0x3f, 0xa6, 0xde, 0xfc
|
|
};
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result) == v);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("high-precision number")
|
|
{
|
|
SECTION("unsigned integer number")
|
|
{
|
|
std::vector<uint8_t> const vec = {'H', 'i', 0x14, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0'};
|
|
const auto j = json::from_ubjson(vec);
|
|
CHECK(j.is_number_unsigned());
|
|
CHECK(j.dump() == "12345678901234567890");
|
|
}
|
|
|
|
SECTION("signed integer number")
|
|
{
|
|
std::vector<uint8_t> const vec = {'H', 'i', 0x13, '-', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '1', '2', '3', '4', '5', '6', '7', '8'};
|
|
const auto j = json::from_ubjson(vec);
|
|
CHECK(j.is_number_integer());
|
|
CHECK(j.dump() == "-123456789012345678");
|
|
}
|
|
|
|
SECTION("floating-point number")
|
|
{
|
|
std::vector<uint8_t> const vec = {'H', 'i', 0x16, '3', '.', '1', '4', '1', '5', '9', '2', '6', '5', '3', '5', '8', '9', '7', '9', '3', '2', '3', '8', '4', '6'};
|
|
const auto j = json::from_ubjson(vec);
|
|
CHECK(j.is_number_float());
|
|
CHECK(j.dump() == "3.141592653589793");
|
|
}
|
|
|
|
SECTION("errors")
|
|
{
|
|
// error while parsing length
|
|
std::vector<uint8_t> const vec0 = {'H', 'i'};
|
|
CHECK(json::from_ubjson(vec0, true, false).is_discarded());
|
|
// error while parsing string
|
|
std::vector<uint8_t> const vec1 = {'H', 'i', '1'};
|
|
CHECK(json::from_ubjson(vec1, true, false).is_discarded());
|
|
|
|
json _;
|
|
std::vector<uint8_t> const vec2 = {'H', 'i', 2, '1', 'A', '3'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vec2), "[json.exception.parse_error.115] parse error at byte 5: syntax error while parsing UBJSON high-precision number: invalid number text: 1A", json::parse_error);
|
|
std::vector<uint8_t> const vec3 = {'H', 'i', 2, '1', '.'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vec3), "[json.exception.parse_error.115] parse error at byte 5: syntax error while parsing UBJSON high-precision number: invalid number text: 1.", json::parse_error);
|
|
// Reject NULs where they are read, including trailing NULs and payloads cut off after one.
|
|
SECTION("NUL in high-precision number (issue #5753)")
|
|
{
|
|
for (const auto& vec : std::vector<std::vector<uint8_t>>
|
|
{
|
|
{'H', 'i', 3, '1', 0, 'x'},
|
|
{'H', 'i', 2, '1', 0},
|
|
{'H', 'i', 3, '1', 0}
|
|
})
|
|
{
|
|
CAPTURE(vec)
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vec), "[json.exception.parse_error.115] parse error at byte 5: syntax error while parsing UBJSON high-precision number: invalid number text; last byte: 0x00", json::parse_error);
|
|
CHECK(json::from_ubjson(vec, true, false).is_discarded());
|
|
CHECK(json::from_ubjson(vec, false, false).is_discarded());
|
|
}
|
|
|
|
std::vector<uint8_t> const nested = {'[', 'H', 'i', 3, '1', 0, 'x', ']'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(nested), "[json.exception.parse_error.115] parse error at byte 6: syntax error while parsing UBJSON high-precision number: invalid number text; last byte: 0x00", json::parse_error);
|
|
CHECK(json::from_ubjson(nested, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const valid = {'H', 'i', 1, '1'};
|
|
const auto j = json::from_ubjson(valid);
|
|
CHECK(j.is_number_unsigned());
|
|
CHECK(j == json(1));
|
|
}
|
|
|
|
std::vector<uint8_t> const vec_overflow = {'H', 'i', 5, '1', 'e', '4', '0', '0'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vec_overflow), "[json.exception.out_of_range.406] number overflow parsing '1e400'", json::out_of_range&);
|
|
std::vector<uint8_t> const vec4 = {'H', 2, '1', '0'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vec4), "[json.exception.parse_error.113] parse error at byte 2: syntax error while parsing UBJSON size: expected length type specification (U, i, I, l, L) after '#'; last byte: 0x02", json::parse_error);
|
|
}
|
|
|
|
SECTION("serialization")
|
|
{
|
|
// number that does not fit int64
|
|
json const j = 11111111111111111111ULL;
|
|
CHECK(j.is_number_unsigned());
|
|
|
|
// number will be serialized to high-precision number
|
|
const auto vec = json::to_ubjson(j);
|
|
std::vector<uint8_t> expected = {'H', 'i', 0x14, '1', '1', '1', '1', '1', '1', '1', '1', '1', '1', '1', '1', '1', '1', '1', '1', '1', '1', '1', '1'};
|
|
CHECK(vec == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(vec) == j);
|
|
}
|
|
}
|
|
}
|
|
|
|
SECTION("string")
|
|
{
|
|
SECTION("N = 0..127")
|
|
{
|
|
for (size_t N = 0; N <= 127; ++N)
|
|
{
|
|
CAPTURE(N)
|
|
|
|
// create JSON value with string containing of N * 'x'
|
|
const auto s = std::string(N, 'x');
|
|
json const j = s;
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> expected;
|
|
expected.push_back('S');
|
|
expected.push_back('i');
|
|
expected.push_back(static_cast<uint8_t>(N));
|
|
for (size_t i = 0; i < N; ++i)
|
|
{
|
|
expected.push_back('x');
|
|
}
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == N + 3);
|
|
// check that no null byte is appended
|
|
if (N > 0)
|
|
{
|
|
CHECK(result.back() != '\x00');
|
|
}
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("N = 128..255")
|
|
{
|
|
for (size_t N = 128; N <= 255; ++N)
|
|
{
|
|
CAPTURE(N)
|
|
|
|
// create JSON value with string containing of N * 'x'
|
|
const auto s = std::string(N, 'x');
|
|
json const j = s;
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> expected;
|
|
expected.push_back('S');
|
|
expected.push_back('U');
|
|
expected.push_back(static_cast<uint8_t>(N));
|
|
for (size_t i = 0; i < N; ++i)
|
|
{
|
|
expected.push_back('x');
|
|
}
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == N + 3);
|
|
// check that no null byte is appended
|
|
CHECK(result.back() != '\x00');
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("N = 256..32767")
|
|
{
|
|
for (size_t N :
|
|
{
|
|
256u, 999u, 1025u, 3333u, 2048u, 32767u
|
|
})
|
|
{
|
|
CAPTURE(N)
|
|
|
|
// create JSON value with string containing of N * 'x'
|
|
const auto s = std::string(N, 'x');
|
|
json const j = s;
|
|
|
|
// create expected byte vector (hack: create string first)
|
|
std::vector<uint8_t> expected(N, 'x');
|
|
// reverse order of commands, because we insert at begin()
|
|
expected.insert(expected.begin(), static_cast<uint8_t>(N & 0xff));
|
|
expected.insert(expected.begin(), static_cast<uint8_t>((N >> 8) & 0xff));
|
|
expected.insert(expected.begin(), 'I');
|
|
expected.insert(expected.begin(), 'S');
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == N + 4);
|
|
// check that no null byte is appended
|
|
CHECK(result.back() != '\x00');
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("N = 65536..2147483647")
|
|
{
|
|
for (size_t N :
|
|
{
|
|
65536u, 77777u, 1048576u
|
|
})
|
|
{
|
|
CAPTURE(N)
|
|
|
|
// create JSON value with string containing of N * 'x'
|
|
const auto s = std::string(N, 'x');
|
|
json const j = s;
|
|
|
|
// create expected byte vector (hack: create string first)
|
|
std::vector<uint8_t> expected(N, 'x');
|
|
// reverse order of commands, because we insert at begin()
|
|
expected.insert(expected.begin(), static_cast<uint8_t>(N & 0xff));
|
|
expected.insert(expected.begin(), static_cast<uint8_t>((N >> 8) & 0xff));
|
|
expected.insert(expected.begin(), static_cast<uint8_t>((N >> 16) & 0xff));
|
|
expected.insert(expected.begin(), static_cast<uint8_t>((N >> 24) & 0xff));
|
|
expected.insert(expected.begin(), 'l');
|
|
expected.insert(expected.begin(), 'S');
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == N + 6);
|
|
// check that no null byte is appended
|
|
CHECK(result.back() != '\x00');
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
}
|
|
|
|
SECTION("binary")
|
|
{
|
|
SECTION("N = 0..127")
|
|
{
|
|
for (std::size_t N = 0; N <= 127; ++N)
|
|
{
|
|
CAPTURE(N)
|
|
|
|
// create JSON value with byte array containing of N * 'x'
|
|
const auto s = std::vector<std::uint8_t>(N, 'x');
|
|
json const j = json::binary(s);
|
|
|
|
// create expected byte vector
|
|
std::vector<std::uint8_t> expected;
|
|
expected.push_back(static_cast<std::uint8_t>('['));
|
|
if (N != 0)
|
|
{
|
|
expected.push_back(static_cast<std::uint8_t>('$'));
|
|
expected.push_back(static_cast<std::uint8_t>('U'));
|
|
}
|
|
expected.push_back(static_cast<std::uint8_t>('#'));
|
|
expected.push_back(static_cast<std::uint8_t>('i'));
|
|
expected.push_back(static_cast<std::uint8_t>(N));
|
|
for (size_t i = 0; i < N; ++i)
|
|
{
|
|
expected.push_back(0x78);
|
|
}
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
if (N == 0)
|
|
{
|
|
CHECK(result.size() == N + 4);
|
|
}
|
|
else
|
|
{
|
|
CHECK(result.size() == N + 6);
|
|
}
|
|
|
|
// check that no null byte is appended
|
|
if (N > 0)
|
|
{
|
|
CHECK(result.back() != '\x00');
|
|
}
|
|
|
|
// roundtrip only works to an array of numbers
|
|
json j_out = s;
|
|
CHECK(json::from_ubjson(result) == j_out);
|
|
CHECK(json::from_ubjson(result, true, false) == j_out);
|
|
}
|
|
}
|
|
|
|
SECTION("N = 128..255")
|
|
{
|
|
for (std::size_t N = 128; N <= 255; ++N)
|
|
{
|
|
CAPTURE(N)
|
|
|
|
// create JSON value with byte array containing of N * 'x'
|
|
const auto s = std::vector<std::uint8_t>(N, 'x');
|
|
json const j = json::binary(s);
|
|
|
|
// create expected byte vector
|
|
std::vector<uint8_t> expected;
|
|
expected.push_back(static_cast<std::uint8_t>('['));
|
|
expected.push_back(static_cast<std::uint8_t>('$'));
|
|
expected.push_back(static_cast<std::uint8_t>('U'));
|
|
expected.push_back(static_cast<std::uint8_t>('#'));
|
|
expected.push_back(static_cast<std::uint8_t>('U'));
|
|
expected.push_back(static_cast<std::uint8_t>(N));
|
|
for (size_t i = 0; i < N; ++i)
|
|
{
|
|
expected.push_back(0x78);
|
|
}
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == N + 6);
|
|
// check that no null byte is appended
|
|
CHECK(result.back() != '\x00');
|
|
|
|
// roundtrip only works to an array of numbers
|
|
json j_out = s;
|
|
CHECK(json::from_ubjson(result) == j_out);
|
|
CHECK(json::from_ubjson(result, true, false) == j_out);
|
|
}
|
|
}
|
|
|
|
SECTION("N = 256..32767")
|
|
{
|
|
for (std::size_t N :
|
|
{
|
|
256u, 999u, 1025u, 3333u, 2048u, 32767u
|
|
})
|
|
{
|
|
CAPTURE(N)
|
|
|
|
// create JSON value with byte array containing of N * 'x'
|
|
const auto s = std::vector<std::uint8_t>(N, 'x');
|
|
json const j = json::binary(s);
|
|
|
|
// create expected byte vector
|
|
std::vector<std::uint8_t> expected(N + 7, 'x');
|
|
expected[0] = '[';
|
|
expected[1] = '$';
|
|
expected[2] = 'U';
|
|
expected[3] = '#';
|
|
expected[4] = 'I';
|
|
expected[5] = static_cast<std::uint8_t>((N >> 8) & 0xFF);
|
|
expected[6] = static_cast<std::uint8_t>(N & 0xFF);
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == N + 7);
|
|
// check that no null byte is appended
|
|
CHECK(result.back() != '\x00');
|
|
|
|
// roundtrip only works to an array of numbers
|
|
json j_out = s;
|
|
CHECK(json::from_ubjson(result) == j_out);
|
|
CHECK(json::from_ubjson(result, true, false) == j_out);
|
|
}
|
|
}
|
|
|
|
SECTION("N = 32768..2147483647")
|
|
{
|
|
for (std::size_t N :
|
|
{
|
|
32768u, 77777u, 1048576u
|
|
})
|
|
{
|
|
CAPTURE(N)
|
|
|
|
// create JSON value with byte array containing of N * 'x'
|
|
const auto s = std::vector<std::uint8_t>(N, 'x');
|
|
json const j = json::binary(s);
|
|
|
|
// create expected byte vector
|
|
std::vector<std::uint8_t> expected(N + 9, 'x');
|
|
expected[0] = '[';
|
|
expected[1] = '$';
|
|
expected[2] = 'U';
|
|
expected[3] = '#';
|
|
expected[4] = 'l';
|
|
expected[5] = static_cast<std::uint8_t>((N >> 24) & 0xFF);
|
|
expected[6] = static_cast<std::uint8_t>((N >> 16) & 0xFF);
|
|
expected[7] = static_cast<std::uint8_t>((N >> 8) & 0xFF);
|
|
expected[8] = static_cast<std::uint8_t>(N & 0xFF);
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == N + 9);
|
|
// check that no null byte is appended
|
|
CHECK(result.back() != '\x00');
|
|
|
|
// roundtrip only works to an array of numbers
|
|
json j_out = s;
|
|
CHECK(json::from_ubjson(result) == j_out);
|
|
CHECK(json::from_ubjson(result, true, false) == j_out);
|
|
}
|
|
}
|
|
|
|
SECTION("Other Serializations")
|
|
{
|
|
const std::size_t N = 10;
|
|
const auto s = std::vector<std::uint8_t>(N, 'x');
|
|
json const j = json::binary(s);
|
|
|
|
SECTION("No Count No Type")
|
|
{
|
|
std::vector<uint8_t> expected;
|
|
expected.push_back(static_cast<std::uint8_t>('['));
|
|
for (std::size_t i = 0; i < N; ++i)
|
|
{
|
|
expected.push_back(static_cast<std::uint8_t>('U'));
|
|
expected.push_back(static_cast<std::uint8_t>(0x78));
|
|
}
|
|
expected.push_back(static_cast<std::uint8_t>(']'));
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j, false, false);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == N + 12);
|
|
// check that no null byte is appended
|
|
CHECK(result.back() != '\x00');
|
|
|
|
// roundtrip only works to an array of numbers
|
|
json j_out = s;
|
|
CHECK(json::from_ubjson(result) == j_out);
|
|
CHECK(json::from_ubjson(result, true, false) == j_out);
|
|
}
|
|
|
|
SECTION("Yes Count No Type")
|
|
{
|
|
std::vector<std::uint8_t> expected;
|
|
expected.push_back(static_cast<std::uint8_t>('['));
|
|
expected.push_back(static_cast<std::uint8_t>('#'));
|
|
expected.push_back(static_cast<std::uint8_t>('i'));
|
|
expected.push_back(static_cast<std::uint8_t>(N));
|
|
|
|
for (size_t i = 0; i < N; ++i)
|
|
{
|
|
expected.push_back(static_cast<std::uint8_t>('U'));
|
|
expected.push_back(static_cast<std::uint8_t>(0x78));
|
|
}
|
|
|
|
// compare result + size
|
|
const auto result = json::to_ubjson(j, true, false);
|
|
CHECK(result == expected);
|
|
CHECK(result.size() == N + 14);
|
|
// check that no null byte is appended
|
|
CHECK(result.back() != '\x00');
|
|
|
|
// roundtrip only works to an array of numbers
|
|
json j_out = s;
|
|
CHECK(json::from_ubjson(result) == j_out);
|
|
CHECK(json::from_ubjson(result, true, false) == j_out);
|
|
}
|
|
}
|
|
}
|
|
|
|
SECTION("array")
|
|
{
|
|
SECTION("empty")
|
|
{
|
|
SECTION("size=false type=false")
|
|
{
|
|
json const j = json::array();
|
|
std::vector<uint8_t> expected = {'[', ']'};
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=false")
|
|
{
|
|
json const j = json::array();
|
|
std::vector<uint8_t> expected = {'[', '#', 'i', 0};
|
|
const auto result = json::to_ubjson(j, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=true")
|
|
{
|
|
json const j = json::array();
|
|
std::vector<uint8_t> expected = {'[', '#', 'i', 0};
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("[null]")
|
|
{
|
|
SECTION("size=false type=false")
|
|
{
|
|
json const j = {nullptr};
|
|
std::vector<uint8_t> expected = {'[', 'Z', ']'};
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=false")
|
|
{
|
|
json const j = {nullptr};
|
|
std::vector<uint8_t> expected = {'[', '#', 'i', 1, 'Z'};
|
|
const auto result = json::to_ubjson(j, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=true")
|
|
{
|
|
json const j = {nullptr};
|
|
std::vector<uint8_t> expected = {'[', '$', 'Z', '#', 'i', 1};
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("[1,2,3,4,5]")
|
|
{
|
|
SECTION("size=false type=false")
|
|
{
|
|
json const j = json::parse("[1,2,3,4,5]");
|
|
std::vector<uint8_t> expected = {'[', 'i', 1, 'i', 2, 'i', 3, 'i', 4, 'i', 5, ']'};
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=false")
|
|
{
|
|
json const j = json::parse("[1,2,3,4,5]");
|
|
std::vector<uint8_t> expected = {'[', '#', 'i', 5, 'i', 1, 'i', 2, 'i', 3, 'i', 4, 'i', 5};
|
|
const auto result = json::to_ubjson(j, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=true")
|
|
{
|
|
json const j = json::parse("[1,2,3,4,5]");
|
|
std::vector<uint8_t> expected = {'[', '$', 'i', '#', 'i', 5, 1, 2, 3, 4, 5};
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("[[[[]]]]")
|
|
{
|
|
SECTION("size=false type=false")
|
|
{
|
|
json const j = json::parse("[[[[]]]]");
|
|
std::vector<uint8_t> expected = {'[', '[', '[', '[', ']', ']', ']', ']'};
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=false")
|
|
{
|
|
json const j = json::parse("[[[[]]]]");
|
|
std::vector<uint8_t> expected = {'[', '#', 'i', 1, '[', '#', 'i', 1, '[', '#', 'i', 1, '[', '#', 'i', 0};
|
|
const auto result = json::to_ubjson(j, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=true")
|
|
{
|
|
json const j = json::parse("[[[[]]]]");
|
|
std::vector<uint8_t> expected = {'[', '$', '[', '#', 'i', 1, '$', '[', '#', 'i', 1, '$', '[', '#', 'i', 1, '#', 'i', 0};
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("array with uint16_t elements")
|
|
{
|
|
SECTION("size=false type=false")
|
|
{
|
|
json j(257, nullptr);
|
|
std::vector<uint8_t> expected(j.size() + 2, 'Z'); // all null
|
|
expected[0] = '['; // opening array
|
|
expected[258] = ']'; // closing array
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=false")
|
|
{
|
|
json j(257, nullptr);
|
|
std::vector<uint8_t> expected(j.size() + 5, 'Z'); // all null
|
|
expected[0] = '['; // opening array
|
|
expected[1] = '#'; // array size
|
|
expected[2] = 'I'; // int16
|
|
expected[3] = 0x01; // 0x0101, first byte
|
|
expected[4] = 0x01; // 0x0101, second byte
|
|
const auto result = json::to_ubjson(j, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=true")
|
|
{
|
|
json j(257, nullptr);
|
|
std::vector<uint8_t> expected = {'[', '$', 'Z', '#', 'I', 0x01, 0x01};
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("array with uint32_t elements")
|
|
{
|
|
SECTION("size=false type=false")
|
|
{
|
|
json j(65793, nullptr);
|
|
std::vector<uint8_t> expected(j.size() + 2, 'Z'); // all null
|
|
expected[0] = '['; // opening array
|
|
expected[65794] = ']'; // closing array
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=false")
|
|
{
|
|
json j(65793, nullptr);
|
|
std::vector<uint8_t> expected(j.size() + 7, 'Z'); // all null
|
|
expected[0] = '['; // opening array
|
|
expected[1] = '#'; // array size
|
|
expected[2] = 'l'; // int32
|
|
expected[3] = 0x00; // 0x00010101, first byte
|
|
expected[4] = 0x01; // 0x00010101, second byte
|
|
expected[5] = 0x01; // 0x00010101, third byte
|
|
expected[6] = 0x01; // 0x00010101, fourth byte
|
|
const auto result = json::to_ubjson(j, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=true")
|
|
{
|
|
json j(65793, nullptr);
|
|
std::vector<uint8_t> expected = {'[', '$', 'Z', '#', 'l', 0x00, 0x01, 0x01, 0x01};
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
}
|
|
|
|
SECTION("object")
|
|
{
|
|
SECTION("empty")
|
|
{
|
|
SECTION("size=false type=false")
|
|
{
|
|
json const j = json::object();
|
|
std::vector<uint8_t> expected = {'{', '}'};
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=false")
|
|
{
|
|
json const j = json::object();
|
|
std::vector<uint8_t> expected = {'{', '#', 'i', 0};
|
|
const auto result = json::to_ubjson(j, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=true")
|
|
{
|
|
json const j = json::object();
|
|
std::vector<uint8_t> expected = {'{', '#', 'i', 0};
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("{\"\":null}")
|
|
{
|
|
SECTION("size=false type=false")
|
|
{
|
|
json const j = {{"", nullptr}};
|
|
std::vector<uint8_t> expected = {'{', 'i', 0, 'Z', '}'};
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=false")
|
|
{
|
|
json const j = {{"", nullptr}};
|
|
std::vector<uint8_t> expected = {'{', '#', 'i', 1, 'i', 0, 'Z'};
|
|
const auto result = json::to_ubjson(j, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=true")
|
|
{
|
|
json const j = {{"", nullptr}};
|
|
std::vector<uint8_t> expected = {'{', '$', 'Z', '#', 'i', 1, 'i', 0};
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("{\"a\": {\"b\": {\"c\": {}}}}")
|
|
{
|
|
SECTION("size=false type=false")
|
|
{
|
|
json const j = json::parse(R"({"a": {"b": {"c": {}}}})");
|
|
std::vector<uint8_t> expected =
|
|
{
|
|
'{', 'i', 1, 'a', '{', 'i', 1, 'b', '{', 'i', 1, 'c', '{', '}', '}', '}', '}'
|
|
};
|
|
const auto result = json::to_ubjson(j);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=false")
|
|
{
|
|
json const j = json::parse(R"({"a": {"b": {"c": {}}}})");
|
|
std::vector<uint8_t> expected =
|
|
{
|
|
'{', '#', 'i', 1, 'i', 1, 'a', '{', '#', 'i', 1, 'i', 1, 'b', '{', '#', 'i', 1, 'i', 1, 'c', '{', '#', 'i', 0
|
|
};
|
|
const auto result = json::to_ubjson(j, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
|
|
SECTION("size=true type=true")
|
|
{
|
|
json const j = json::parse(R"({"a": {"b": {"c": {}}}})");
|
|
std::vector<uint8_t> expected =
|
|
{
|
|
'{', '$', '{', '#', 'i', 1, 'i', 1, 'a', '$', '{', '#', 'i', 1, 'i', 1, 'b', '$', '{', '#', 'i', 1, 'i', 1, 'c', '#', 'i', 0
|
|
};
|
|
const auto result = json::to_ubjson(j, true, true);
|
|
CHECK(result == expected);
|
|
|
|
// roundtrip
|
|
CHECK(json::from_ubjson(result) == j);
|
|
CHECK(json::from_ubjson(result, true, false) == j);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
SECTION("errors")
|
|
{
|
|
SECTION("strict mode")
|
|
{
|
|
std::vector<uint8_t> const vec = {'Z', 'Z'};
|
|
SECTION("non-strict mode")
|
|
{
|
|
const auto result = json::from_ubjson(vec, false);
|
|
CHECK(result == json());
|
|
}
|
|
|
|
SECTION("strict mode")
|
|
{
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vec), "[json.exception.parse_error.110] parse error at byte 2: syntax error while parsing UBJSON value: expected end of input; last byte: 0x5A", json::parse_error&);
|
|
}
|
|
}
|
|
|
|
SECTION("excessive size")
|
|
{
|
|
SECTION("array")
|
|
{
|
|
std::vector<uint8_t> const v_ubjson = {'[', '$', 'Z', '#', 'L', 0x78, 0x28, 0x00, 0x68, 0x28, 0x69, 0x69, 0x17};
|
|
json _;
|
|
CHECK_THROWS_AS(_ = json::from_ubjson(v_ubjson), json::out_of_range&);
|
|
|
|
json j;
|
|
nlohmann::detail::json_sax_dom_callback_parser<json, decltype(nlohmann::detail::input_adapter(v_ubjson))> scp(j, [](int /*unused*/, json::parse_event_t /*unused*/, const json& /*unused*/) noexcept
|
|
{
|
|
return true;
|
|
});
|
|
CHECK_THROWS_AS(_ = json::sax_parse(v_ubjson, &scp, json::input_format_t::ubjson), json::out_of_range&);
|
|
}
|
|
|
|
SECTION("object")
|
|
{
|
|
std::vector<uint8_t> const v_ubjson = {'{', '$', 'Z', '#', 'L', 0x78, 0x28, 0x00, 0x68, 0x28, 0x69, 0x69, 0x17};
|
|
json _;
|
|
CHECK_THROWS_AS(_ = json::from_ubjson(v_ubjson), json::out_of_range&);
|
|
|
|
json j;
|
|
nlohmann::detail::json_sax_dom_callback_parser<json, decltype(nlohmann::detail::input_adapter(v_ubjson))> scp(j, [](int /*unused*/, json::parse_event_t /*unused*/, const json& /*unused*/) noexcept
|
|
{
|
|
return true;
|
|
});
|
|
CHECK_THROWS_AS(_ = json::sax_parse(v_ubjson, &scp, json::input_format_t::ubjson), json::out_of_range&);
|
|
}
|
|
|
|
SECTION("array with a known size, read with a callback")
|
|
{
|
|
// a sized array announces its length to start_array()
|
|
std::vector<uint8_t> const v_ubjson = {'[', '#', 'i', 2, 'i', 1, 'i', 2};
|
|
json j;
|
|
nlohmann::detail::json_sax_dom_callback_parser<json, decltype(nlohmann::detail::input_adapter(v_ubjson))> scp(j, [](int /*unused*/, json::parse_event_t /*unused*/, const json& /*unused*/) noexcept
|
|
{
|
|
return true;
|
|
});
|
|
CHECK(json::sax_parse(v_ubjson, &scp, json::input_format_t::ubjson));
|
|
CHECK(j == json({1, 2}));
|
|
|
|
// the readers reject a size this large before they announce
|
|
// it, so it can only reach start_array() directly (the largest
|
|
// value stands for an unknown size and is never checked)
|
|
json k;
|
|
nlohmann::detail::json_sax_dom_callback_parser<json, decltype(nlohmann::detail::input_adapter(v_ubjson))> scp2(k, [](int /*unused*/, json::parse_event_t /*unused*/, const json& /*unused*/) noexcept
|
|
{
|
|
return true;
|
|
});
|
|
CHECK_THROWS_AS(scp2.start_array((std::numeric_limits<std::size_t>::max)() - 1), json::out_of_range&);
|
|
}
|
|
}
|
|
}
|
|
|
|
SECTION("SAX aborts")
|
|
{
|
|
SECTION("start_array()")
|
|
{
|
|
std::vector<uint8_t> const v = {'[', 'T', 'F', ']'};
|
|
SaxCountdown scp(0);
|
|
CHECK(!json::sax_parse(v, &scp, json::input_format_t::ubjson));
|
|
}
|
|
|
|
SECTION("start_object()")
|
|
{
|
|
std::vector<uint8_t> const v = {'{', 'i', 3, 'f', 'o', 'o', 'F', '}'};
|
|
SaxCountdown scp(0);
|
|
CHECK(!json::sax_parse(v, &scp, json::input_format_t::ubjson));
|
|
}
|
|
|
|
SECTION("key() in object")
|
|
{
|
|
std::vector<uint8_t> const v = {'{', 'i', 3, 'f', 'o', 'o', 'F', '}'};
|
|
SaxCountdown scp(1);
|
|
CHECK(!json::sax_parse(v, &scp, json::input_format_t::ubjson));
|
|
}
|
|
|
|
SECTION("start_array(len)")
|
|
{
|
|
std::vector<uint8_t> const v = {'[', '#', 'i', '2', 'T', 'F'};
|
|
SaxCountdown scp(0);
|
|
CHECK(!json::sax_parse(v, &scp, json::input_format_t::ubjson));
|
|
}
|
|
|
|
SECTION("start_object(len)")
|
|
{
|
|
std::vector<uint8_t> const v = {'{', '#', 'i', '1', 3, 'f', 'o', 'o', 'F'};
|
|
SaxCountdown scp(0);
|
|
CHECK(!json::sax_parse(v, &scp, json::input_format_t::ubjson));
|
|
}
|
|
|
|
SECTION("key() in object with length")
|
|
{
|
|
std::vector<uint8_t> const v = {'{', 'i', 3, 'f', 'o', 'o', 'F', '}'};
|
|
SaxCountdown scp(1);
|
|
CHECK(!json::sax_parse(v, &scp, json::input_format_t::ubjson));
|
|
}
|
|
}
|
|
|
|
SECTION("parsing values")
|
|
{
|
|
SECTION("strings")
|
|
{
|
|
// create a single-character string for all number types
|
|
std::vector<uint8_t> s_i = {'S', 'i', 1, 'a'};
|
|
std::vector<uint8_t> const s_U = {'S', 'U', 1, 'a'};
|
|
std::vector<uint8_t> const s_I = {'S', 'I', 0, 1, 'a'};
|
|
std::vector<uint8_t> const s_l = {'S', 'l', 0, 0, 0, 1, 'a'};
|
|
std::vector<uint8_t> const s_L = {'S', 'L', 0, 0, 0, 0, 0, 0, 0, 1, 'a'};
|
|
|
|
// check if string is parsed correctly to "a"
|
|
CHECK(json::from_ubjson(s_i) == "a");
|
|
CHECK(json::from_ubjson(s_U) == "a");
|
|
CHECK(json::from_ubjson(s_I) == "a");
|
|
CHECK(json::from_ubjson(s_l) == "a");
|
|
CHECK(json::from_ubjson(s_L) == "a");
|
|
|
|
// roundtrip: output should be optimized
|
|
CHECK(json::to_ubjson(json::from_ubjson(s_i)) == s_i);
|
|
CHECK(json::to_ubjson(json::from_ubjson(s_U)) == s_i);
|
|
CHECK(json::to_ubjson(json::from_ubjson(s_I)) == s_i);
|
|
CHECK(json::to_ubjson(json::from_ubjson(s_l)) == s_i);
|
|
CHECK(json::to_ubjson(json::from_ubjson(s_L)) == s_i);
|
|
}
|
|
|
|
SECTION("no-op markers")
|
|
{
|
|
// A no-op ('N') is valid wherever a value may start; it is consumed
|
|
// by get_ignore_noop() before the value is read. It is not valid
|
|
// where a string length type specification is expected.
|
|
|
|
SECTION("accepted where a value may start")
|
|
{
|
|
// at top level, also repeated
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'N', 'i', 1})) == json(1));
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'N', 'N', 'N', 'i', 1})) == json(1));
|
|
|
|
// inside an array of unknown size, before and after an element
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', 'N', 'i', 1, ']'})) == json({1}));
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', 'i', 1, 'N', ']'})) == json({1}));
|
|
|
|
// inside an object of unknown size: before a key, between key
|
|
// and value, and before the closing '}'
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'{', 'N', 'U', 1, 'a', 'i', 1, '}'})) == json({{"a", 1}}));
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'{', 'U', 1, 'a', 'N', 'i', 1, '}'})) == json({{"a", 1}}));
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'{', 'U', 1, 'a', 'i', 1, 'N', '}'})) == json({{"a", 1}}));
|
|
}
|
|
|
|
SECTION("rejected where a length type specification is expected")
|
|
{
|
|
json _;
|
|
|
|
// after the 'S' marker of a string value
|
|
std::vector<uint8_t> const v_S = {'S', 'N', 'U', 1, 'a'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v_S), "[json.exception.parse_error.113] parse error at byte 2: syntax error while parsing UBJSON string: expected length type specification (U, i, I, l, L); last byte: 0x4E", json::parse_error&);
|
|
|
|
// as the key length of an object with a known size, where
|
|
// no-ops are not permitted in the first place
|
|
std::vector<uint8_t> const v_key = {'{', '#', 'i', 1, 'N', 'U', 1, 'a', 'i', 1};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v_key), "[json.exception.parse_error.113] parse error at byte 5: syntax error while parsing UBJSON string: expected length type specification (U, i, I, l, L); last byte: 0x4E", json::parse_error&);
|
|
}
|
|
}
|
|
|
|
SECTION("number")
|
|
{
|
|
SECTION("float")
|
|
{
|
|
// float32
|
|
std::vector<uint8_t> const v_d = {'d', 0x40, 0x49, 0x0f, 0xd0};
|
|
CHECK(json::from_ubjson(v_d) == 3.14159f);
|
|
|
|
// float64
|
|
std::vector<uint8_t> const v_D = {'D', 0x40, 0x09, 0x21, 0xf9, 0xf0, 0x1b, 0x86, 0x6e};
|
|
CHECK(json::from_ubjson(v_D) == 3.14159);
|
|
|
|
// float32 is serialized as float64 as the library does not support float32
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_d)) == json::to_ubjson(3.14159f));
|
|
}
|
|
}
|
|
|
|
SECTION("array")
|
|
{
|
|
SECTION("optimized version (length only)")
|
|
{
|
|
// create vector with two elements of the same type
|
|
std::vector<uint8_t> const v_TU = {'[', '#', 'U', 2, 'T', 'T'};
|
|
std::vector<uint8_t> const v_T = {'[', '#', 'i', 2, 'T', 'T'};
|
|
std::vector<uint8_t> const v_F = {'[', '#', 'i', 2, 'F', 'F'};
|
|
std::vector<uint8_t> const v_Z = {'[', '#', 'i', 2, 'Z', 'Z'};
|
|
std::vector<uint8_t> const v_i = {'[', '#', 'i', 2, 'i', 0x7F, 'i', 0x7F};
|
|
std::vector<uint8_t> const v_U = {'[', '#', 'i', 2, 'U', 0xFF, 'U', 0xFF};
|
|
std::vector<uint8_t> const v_I = {'[', '#', 'i', 2, 'I', 0x7F, 0xFF, 'I', 0x7F, 0xFF};
|
|
std::vector<uint8_t> const v_l = {'[', '#', 'i', 2, 'l', 0x7F, 0xFF, 0xFF, 0xFF, 'l', 0x7F, 0xFF, 0xFF, 0xFF};
|
|
std::vector<uint8_t> const v_L = {'[', '#', 'i', 2, 'L', 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 'L', 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
|
|
std::vector<uint8_t> const v_D = {'[', '#', 'i', 2, 'D', 0x40, 0x09, 0x21, 0xfb, 0x4d, 0x12, 0xd8, 0x4a, 'D', 0x40, 0x09, 0x21, 0xfb, 0x4d, 0x12, 0xd8, 0x4a};
|
|
std::vector<uint8_t> const v_S = {'[', '#', 'i', 2, 'S', 'i', 1, 'a', 'S', 'i', 1, 'a'};
|
|
std::vector<uint8_t> const v_C = {'[', '#', 'i', 2, 'C', 'a', 'C', 'a'};
|
|
|
|
// check if vector is parsed correctly
|
|
CHECK(json::from_ubjson(v_TU) == json({true, true}));
|
|
CHECK(json::from_ubjson(v_T) == json({true, true}));
|
|
CHECK(json::from_ubjson(v_F) == json({false, false}));
|
|
CHECK(json::from_ubjson(v_Z) == json({nullptr, nullptr}));
|
|
CHECK(json::from_ubjson(v_i) == json({127, 127}));
|
|
CHECK(json::from_ubjson(v_U) == json({255, 255}));
|
|
CHECK(json::from_ubjson(v_I) == json({32767, 32767}));
|
|
CHECK(json::from_ubjson(v_l) == json({2147483647, 2147483647}));
|
|
CHECK(json::from_ubjson(v_L) == json({9223372036854775807, 9223372036854775807}));
|
|
CHECK(json::from_ubjson(v_D) == json({3.1415926, 3.1415926}));
|
|
CHECK(json::from_ubjson(v_S) == json({"a", "a"}));
|
|
CHECK(json::from_ubjson(v_C) == json({"a", "a"}));
|
|
|
|
// roundtrip: output should be optimized
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_T), true) == v_T);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_F), true) == v_F);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_Z), true) == v_Z);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_i), true) == v_i);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_U), true) == v_U);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_I), true) == v_I);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_l), true) == v_l);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_L), true) == v_L);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_D), true) == v_D);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_S), true) == v_S);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_C), true) == v_S); // char is serialized to string
|
|
}
|
|
|
|
SECTION("optimized version (type and length)")
|
|
{
|
|
// create vector with two elements of the same type
|
|
std::vector<uint8_t> const v_N = {'[', '$', 'N', '#', 'i', 2};
|
|
std::vector<uint8_t> const v_T = {'[', '$', 'T', '#', 'i', 2};
|
|
std::vector<uint8_t> const v_F = {'[', '$', 'F', '#', 'i', 2};
|
|
std::vector<uint8_t> const v_Z = {'[', '$', 'Z', '#', 'i', 2};
|
|
std::vector<uint8_t> const v_i = {'[', '$', 'i', '#', 'i', 2, 0x7F, 0x7F};
|
|
std::vector<uint8_t> const v_U = {'[', '$', 'U', '#', 'i', 2, 0xFF, 0xFF};
|
|
std::vector<uint8_t> const v_I = {'[', '$', 'I', '#', 'i', 2, 0x7F, 0xFF, 0x7F, 0xFF};
|
|
std::vector<uint8_t> const v_l = {'[', '$', 'l', '#', 'i', 2, 0x7F, 0xFF, 0xFF, 0xFF, 0x7F, 0xFF, 0xFF, 0xFF};
|
|
std::vector<uint8_t> const v_L = {'[', '$', 'L', '#', 'i', 2, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
|
|
std::vector<uint8_t> const v_D = {'[', '$', 'D', '#', 'i', 2, 0x40, 0x09, 0x21, 0xfb, 0x4d, 0x12, 0xd8, 0x4a, 0x40, 0x09, 0x21, 0xfb, 0x4d, 0x12, 0xd8, 0x4a};
|
|
std::vector<uint8_t> const v_S = {'[', '$', 'S', '#', 'i', 2, 'i', 1, 'a', 'i', 1, 'a'};
|
|
std::vector<uint8_t> const v_C = {'[', '$', 'C', '#', 'i', 2, 'a', 'a'};
|
|
|
|
// check if vector is parsed correctly
|
|
CHECK(json::from_ubjson(v_N) == json::array());
|
|
CHECK(json::from_ubjson(v_T) == json({true, true}));
|
|
CHECK(json::from_ubjson(v_F) == json({false, false}));
|
|
CHECK(json::from_ubjson(v_Z) == json({nullptr, nullptr}));
|
|
CHECK(json::from_ubjson(v_i) == json({127, 127}));
|
|
CHECK(json::from_ubjson(v_U) == json({255, 255}));
|
|
CHECK(json::from_ubjson(v_I) == json({32767, 32767}));
|
|
CHECK(json::from_ubjson(v_l) == json({2147483647, 2147483647}));
|
|
CHECK(json::from_ubjson(v_L) == json({9223372036854775807, 9223372036854775807}));
|
|
CHECK(json::from_ubjson(v_D) == json({3.1415926, 3.1415926}));
|
|
CHECK(json::from_ubjson(v_S) == json({"a", "a"}));
|
|
CHECK(json::from_ubjson(v_C) == json({"a", "a"}));
|
|
|
|
// roundtrip: output should be optimized
|
|
std::vector<uint8_t> const v_empty = {'[', '#', 'i', 0};
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_N), true, true) == v_empty);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_T), true, true) == v_T);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_F), true, true) == v_F);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_Z), true, true) == v_Z);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_i), true, true) == v_i);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_U), true, true) == v_U);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_I), true, true) == v_I);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_l), true, true) == v_l);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_L), true, true) == v_L);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_D), true, true) == v_D);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_S), true, true) == v_S);
|
|
CHECK(json::to_ubjson(json::from_ubjson(v_C), true, true) == v_S); // char is serialized to string
|
|
}
|
|
}
|
|
}
|
|
|
|
SECTION("parse errors")
|
|
{
|
|
SECTION("empty byte vector")
|
|
{
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(std::vector<uint8_t>()), "[json.exception.parse_error.110] parse error at byte 1: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
}
|
|
|
|
SECTION("char")
|
|
{
|
|
SECTION("eof after C byte")
|
|
{
|
|
std::vector<uint8_t> const v = {'C'};
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v), "[json.exception.parse_error.110] parse error at byte 2: syntax error while parsing UBJSON char: unexpected end of input", json::parse_error&);
|
|
}
|
|
|
|
SECTION("byte out of range")
|
|
{
|
|
std::vector<uint8_t> const v = {'C', 130};
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v), "[json.exception.parse_error.113] parse error at byte 2: syntax error while parsing UBJSON char: byte after 'C' must be in range 0x00..0x7F; last byte: 0x82", json::parse_error&);
|
|
}
|
|
}
|
|
|
|
SECTION("strings")
|
|
{
|
|
SECTION("eof after S byte")
|
|
{
|
|
std::vector<uint8_t> const v = {'S'};
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v), "[json.exception.parse_error.110] parse error at byte 2: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
}
|
|
|
|
SECTION("invalid byte")
|
|
{
|
|
std::vector<uint8_t> const v = {'S', '1', 'a'};
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v), "[json.exception.parse_error.113] parse error at byte 2: syntax error while parsing UBJSON string: expected length type specification (U, i, I, l, L); last byte: 0x31", json::parse_error&);
|
|
}
|
|
|
|
SECTION("negative length")
|
|
{
|
|
json _;
|
|
|
|
std::vector<uint8_t> const vi = {'S', 'i', 0xFF};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vi), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing UBJSON string: string length must not be negative", json::parse_error&);
|
|
CHECK(json::from_ubjson(vi, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vI = {'S', 'I', 0xFF, 0xFF};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vI), "[json.exception.parse_error.113] parse error at byte 4: syntax error while parsing UBJSON string: string length must not be negative", json::parse_error&);
|
|
CHECK(json::from_ubjson(vI, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vl = {'S', 'l', 0xFF, 0xFF, 0xFF, 0xFF};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vl), "[json.exception.parse_error.113] parse error at byte 6: syntax error while parsing UBJSON string: string length must not be negative", json::parse_error&);
|
|
CHECK(json::from_ubjson(vl, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vL = {'S', 'L', 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vL), "[json.exception.parse_error.113] parse error at byte 10: syntax error while parsing UBJSON string: string length must not be negative", json::parse_error&);
|
|
CHECK(json::from_ubjson(vL, true, false).is_discarded());
|
|
|
|
// a length of zero remains valid and yields an empty string
|
|
std::vector<uint8_t> const v0 = {'S', 'i', 0};
|
|
CHECK(json::from_ubjson(v0) == json(""));
|
|
}
|
|
}
|
|
|
|
SECTION("array")
|
|
{
|
|
SECTION("optimized array: no size following type")
|
|
{
|
|
std::vector<uint8_t> const v = {'[', '$', 'i', 2};
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v), "[json.exception.parse_error.112] parse error at byte 4: syntax error while parsing UBJSON size: expected '#' after type information; last byte: 0x02", json::parse_error&);
|
|
}
|
|
}
|
|
|
|
SECTION("strings")
|
|
{
|
|
std::vector<uint8_t> const vS = {'S'};
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vS), "[json.exception.parse_error.110] parse error at byte 2: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vS, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const v = {'S', 'i', '2', 'a'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v), "[json.exception.parse_error.110] parse error at byte 5: syntax error while parsing UBJSON string: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(v, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vC = {'C'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vC), "[json.exception.parse_error.110] parse error at byte 2: syntax error while parsing UBJSON char: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vC, true, false).is_discarded());
|
|
}
|
|
|
|
SECTION("sizes")
|
|
{
|
|
std::vector<uint8_t> const vU = {'[', '#', 'U'};
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vU), "[json.exception.parse_error.110] parse error at byte 4: syntax error while parsing UBJSON number: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vU, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vi = {'[', '#', 'i'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vi), "[json.exception.parse_error.110] parse error at byte 4: syntax error while parsing UBJSON number: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vi, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vI = {'[', '#', 'I'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vI), "[json.exception.parse_error.110] parse error at byte 4: syntax error while parsing UBJSON number: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vI, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vl = {'[', '#', 'l'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vl), "[json.exception.parse_error.110] parse error at byte 4: syntax error while parsing UBJSON number: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vl, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vL = {'[', '#', 'L'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vL), "[json.exception.parse_error.110] parse error at byte 4: syntax error while parsing UBJSON number: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vL, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const v0 = {'[', '#', 'T', ']'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v0), "[json.exception.parse_error.113] parse error at byte 3: syntax error while parsing UBJSON size: expected length type specification (U, i, I, l, L) after '#'; last byte: 0x54", json::parse_error&);
|
|
CHECK(json::from_ubjson(v0, true, false).is_discarded());
|
|
}
|
|
|
|
SECTION("types")
|
|
{
|
|
std::vector<uint8_t> const v0 = {'[', '$'};
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v0), "[json.exception.parse_error.110] parse error at byte 3: syntax error while parsing UBJSON type: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(v0, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vi = {'[', '$', '#'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vi), "[json.exception.parse_error.110] parse error at byte 4: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vi, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vT = {'[', '$', 'T'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vT), "[json.exception.parse_error.110] parse error at byte 4: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vT, true, false).is_discarded());
|
|
}
|
|
|
|
SECTION("arrays")
|
|
{
|
|
std::vector<uint8_t> const vST = {'[', '$', 'i', '#', 'i', 2, 1};
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vST), "[json.exception.parse_error.110] parse error at byte 8: syntax error while parsing UBJSON number: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vST, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vS = {'[', '#', 'i', 2, 'i', 1};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vS), "[json.exception.parse_error.110] parse error at byte 7: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vS, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const v = {'[', 'i', 2, 'i', 1};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v), "[json.exception.parse_error.110] parse error at byte 6: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(v, true, false).is_discarded());
|
|
}
|
|
|
|
SECTION("objects")
|
|
{
|
|
std::vector<uint8_t> const vST = {'{', '$', 'i', '#', 'i', 2, 'i', 1, 'a', 1};
|
|
json _;
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vST), "[json.exception.parse_error.110] parse error at byte 11: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vST, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vT = {'{', '$', 'i', 'i', 1, 'a', 1};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vT), "[json.exception.parse_error.112] parse error at byte 4: syntax error while parsing UBJSON size: expected '#' after type information; last byte: 0x69", json::parse_error&);
|
|
CHECK(json::from_ubjson(vT, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vS = {'{', '#', 'i', 2, 'i', 1, 'a', 'i', 1};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vS), "[json.exception.parse_error.110] parse error at byte 10: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vS, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const v = {'{', 'i', 1, 'a', 'i', 1};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v), "[json.exception.parse_error.110] parse error at byte 7: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(v, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const v2 = {'{', 'i', 1, 'a', 'i', 1, 'i'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v2), "[json.exception.parse_error.110] parse error at byte 8: syntax error while parsing UBJSON number: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(v2, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const v3 = {'{', 'i', 1, 'a'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(v3), "[json.exception.parse_error.110] parse error at byte 5: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(v3, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vST1 = {'{', '$', 'd', '#', 'i', 2, 'i', 1, 'a'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vST1), "[json.exception.parse_error.110] parse error at byte 10: syntax error while parsing UBJSON number: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vST1, true, false).is_discarded());
|
|
|
|
std::vector<uint8_t> const vST2 = {'{', '#', 'i', 2, 'i', 1, 'a'};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(vST2), "[json.exception.parse_error.110] parse error at byte 8: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(vST2, true, false).is_discarded());
|
|
}
|
|
}
|
|
|
|
SECTION("writing optimized values")
|
|
{
|
|
SECTION("integer")
|
|
{
|
|
SECTION("array of i")
|
|
{
|
|
json const j = {1, -1};
|
|
std::vector<uint8_t> expected = {'[', '$', 'i', '#', 'i', 2, 1, 0xff};
|
|
CHECK(json::to_ubjson(j, true, true) == expected);
|
|
}
|
|
|
|
SECTION("array of U")
|
|
{
|
|
json const j = {200, 201};
|
|
std::vector<uint8_t> expected = {'[', '$', 'U', '#', 'i', 2, 0xC8, 0xC9};
|
|
CHECK(json::to_ubjson(j, true, true) == expected);
|
|
}
|
|
|
|
SECTION("array of I")
|
|
{
|
|
json const j = {30000, -30000};
|
|
std::vector<uint8_t> expected = {'[', '$', 'I', '#', 'i', 2, 0x75, 0x30, 0x8a, 0xd0};
|
|
CHECK(json::to_ubjson(j, true, true) == expected);
|
|
}
|
|
|
|
SECTION("array of l")
|
|
{
|
|
json const j = {70000, -70000};
|
|
std::vector<uint8_t> expected = {'[', '$', 'l', '#', 'i', 2, 0x00, 0x01, 0x11, 0x70, 0xFF, 0xFE, 0xEE, 0x90};
|
|
CHECK(json::to_ubjson(j, true, true) == expected);
|
|
}
|
|
|
|
SECTION("array of L")
|
|
{
|
|
json const j = {5000000000, -5000000000};
|
|
std::vector<uint8_t> expected = {'[', '$', 'L', '#', 'i', 2, 0x00, 0x00, 0x00, 0x01, 0x2A, 0x05, 0xF2, 0x00, 0xFF, 0xFF, 0xFF, 0xFE, 0xD5, 0xFA, 0x0E, 0x00};
|
|
CHECK(json::to_ubjson(j, true, true) == expected);
|
|
}
|
|
}
|
|
|
|
SECTION("unsigned integer")
|
|
{
|
|
SECTION("array of i")
|
|
{
|
|
json const j = {1u, 2u};
|
|
std::vector<uint8_t> expected = {'[', '$', 'i', '#', 'i', 2, 1, 2};
|
|
std::vector<uint8_t> expected_size = {'[', '#', 'i', 2, 'i', 1, 'i', 2};
|
|
CHECK(json::to_ubjson(j, true, true) == expected);
|
|
CHECK(json::to_ubjson(j, true) == expected_size);
|
|
}
|
|
|
|
SECTION("array of U")
|
|
{
|
|
json const j = {200u, 201u};
|
|
std::vector<uint8_t> expected = {'[', '$', 'U', '#', 'i', 2, 0xC8, 0xC9};
|
|
std::vector<uint8_t> expected_size = {'[', '#', 'i', 2, 'U', 0xC8, 'U', 0xC9};
|
|
CHECK(json::to_ubjson(j, true, true) == expected);
|
|
CHECK(json::to_ubjson(j, true) == expected_size);
|
|
}
|
|
|
|
SECTION("array of I")
|
|
{
|
|
json const j = {30000u, 30001u};
|
|
std::vector<uint8_t> expected = {'[', '$', 'I', '#', 'i', 2, 0x75, 0x30, 0x75, 0x31};
|
|
std::vector<uint8_t> expected_size = {'[', '#', 'i', 2, 'I', 0x75, 0x30, 'I', 0x75, 0x31};
|
|
CHECK(json::to_ubjson(j, true, true) == expected);
|
|
CHECK(json::to_ubjson(j, true) == expected_size);
|
|
}
|
|
|
|
SECTION("array of l")
|
|
{
|
|
json const j = {70000u, 70001u};
|
|
std::vector<uint8_t> expected = {'[', '$', 'l', '#', 'i', 2, 0x00, 0x01, 0x11, 0x70, 0x00, 0x01, 0x11, 0x71};
|
|
std::vector<uint8_t> expected_size = {'[', '#', 'i', 2, 'l', 0x00, 0x01, 0x11, 0x70, 'l', 0x00, 0x01, 0x11, 0x71};
|
|
CHECK(json::to_ubjson(j, true, true) == expected);
|
|
CHECK(json::to_ubjson(j, true) == expected_size);
|
|
}
|
|
|
|
SECTION("array of L")
|
|
{
|
|
json const j = {5000000000u, 5000000001u};
|
|
std::vector<uint8_t> expected = {'[', '$', 'L', '#', 'i', 2, 0x00, 0x00, 0x00, 0x01, 0x2A, 0x05, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x01, 0x2A, 0x05, 0xF2, 0x01};
|
|
std::vector<uint8_t> expected_size = {'[', '#', 'i', 2, 'L', 0x00, 0x00, 0x00, 0x01, 0x2A, 0x05, 0xF2, 0x00, 'L', 0x00, 0x00, 0x00, 0x01, 0x2A, 0x05, 0xF2, 0x01};
|
|
CHECK(json::to_ubjson(j, true, true) == expected);
|
|
CHECK(json::to_ubjson(j, true) == expected_size);
|
|
}
|
|
}
|
|
|
|
SECTION("discarded")
|
|
{
|
|
// a discarded value cannot be serialized to UBJSON, even as part
|
|
// of an optimized array of a single (here: valueless) type
|
|
json const j = {json::value_t::discarded, json::value_t::discarded};
|
|
#if JSON_DIAGNOSTICS
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j, true, true), "[json.exception.type_error.321] (/0) cannot serialize discarded value to UBJSON", json::type_error&);
|
|
#else
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j, true, true), "[json.exception.type_error.321] cannot serialize discarded value to UBJSON", json::type_error&);
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
|
|
TEST_CASE("UBJSON nesting does not consume the call stack")
|
|
{
|
|
// Containers used to be read by calling back into the value reader once
|
|
// per element, so the native call stack grew with the nesting depth of the
|
|
// input. '[' alone opens a container, so a payload of repeated '[' crashed
|
|
// the process (#5104), as did the optimized forms, which reach the same
|
|
// path through a type or size annotation. The containers are kept on a
|
|
// heap stack now.
|
|
//
|
|
// Deeply nested values must not be compared, copied or dumped here: those
|
|
// operations are still recursive and would reintroduce the crash.
|
|
json _;
|
|
|
|
SECTION("containers that end at a marker")
|
|
{
|
|
const std::vector<uint8_t> input(500000, '[');
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(input), "[json.exception.parse_error.110] parse error at byte 500001: syntax error while parsing UBJSON value: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(input, true, false).is_discarded());
|
|
}
|
|
|
|
SECTION("containers with a size")
|
|
{
|
|
std::vector<uint8_t> input;
|
|
for (std::size_t i = 0; i < 100000; ++i)
|
|
{
|
|
input.push_back('[');
|
|
input.push_back('#');
|
|
input.push_back('i');
|
|
input.push_back(1);
|
|
}
|
|
CHECK_THROWS_AS(_ = json::from_ubjson(input), json::parse_error&);
|
|
CHECK(json::from_ubjson(input, true, false).is_discarded());
|
|
}
|
|
|
|
SECTION("containers with a type and a size")
|
|
{
|
|
// '[' is a permitted optimized type in UBJSON, so each element of such
|
|
// a container is itself a container, read without a marker of its own
|
|
std::vector<uint8_t> input;
|
|
for (std::size_t i = 0; i < 100000; ++i)
|
|
{
|
|
const std::vector<uint8_t> level = {'[', '$', '[', '#', 'i', 1};
|
|
input.insert(input.end(), level.begin(), level.end());
|
|
}
|
|
CHECK_THROWS_AS(_ = json::from_ubjson(input), json::parse_error&);
|
|
CHECK(json::from_ubjson(input, true, false).is_discarded());
|
|
}
|
|
|
|
SECTION("a well-formed deep value is read through the SAX interface")
|
|
{
|
|
std::vector<uint8_t> input(100000, '[');
|
|
input.insert(input.end(), 100000, ']');
|
|
|
|
SaxCountdown accept_all(1000000);
|
|
CHECK(json::sax_parse(input, &accept_all, json::input_format_t::ubjson));
|
|
}
|
|
|
|
SECTION("a well-formed deep value is read into a value")
|
|
{
|
|
const std::size_t depth = 10000;
|
|
std::vector<uint8_t> input(depth, '[');
|
|
input.insert(input.end(), depth, ']');
|
|
|
|
json j = json::from_ubjson(input);
|
|
|
|
std::size_t measured = 0;
|
|
const json* p = &j;
|
|
while (p->is_array() && !p->empty())
|
|
{
|
|
p = &p->front();
|
|
++measured;
|
|
}
|
|
// the innermost array is empty, so the descent stops one level short
|
|
CHECK(measured == depth - 1);
|
|
}
|
|
|
|
SECTION("containers are still read the same way")
|
|
{
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', ']'})) == json::array());
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'{', '}'})) == json::object());
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '#', 'i', 0})) == json::array());
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'{', '#', 'i', 0})) == json::object());
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'i', '#', 'i', 2, 1, 2})) == json({1, 2}));
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '#', 'i', 2, 'i', 1, 'i', 2})) == json({1, 2}));
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'{', '$', 'i', '#', 'i', 1, 'i', 1, 'a', 1})) == json({{"a", 1}}));
|
|
// a no-op is not a value, so a container of them holds none
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'N', '#', 'i', 2})) == json::array());
|
|
// sized and unsized forms nested inside one another
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '[', '#', 'i', 2, 'i', 1, 'i', 2, ']'})) == json({{1, 2}}));
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '#', 'i', 1, '[', 'i', 1, ']'})) == json({{1}}));
|
|
// an optimized container of containers
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', '[', '#', 'i', 2, 'i', 1, ']', 'i', 2, ']'})) == json({{1}, {2}}));
|
|
}
|
|
|
|
SECTION("BJData containers are still read the same way")
|
|
{
|
|
// the ND-array wrapper and the binary shortcut are complete values,
|
|
// not containers the reader descends into
|
|
CHECK(json::from_bjdata(std::vector<uint8_t>({'[', '$', 'U', '#', '[', '$', 'i', '#', 'i', 2, 2, 3, 1, 2, 3, 4, 5, 6})) ==
|
|
json({{"_ArrayType_", "uint8"}, {"_ArraySize_", {2, 3}}, {"_ArrayData_", {1, 2, 3, 4, 5, 6}}}));
|
|
CHECK(json::from_bjdata(std::vector<uint8_t>({'[', '$', 'i', '#', 'i', 2, 1, 2})) == json({1, 2}));
|
|
CHECK(json::from_bjdata(std::vector<uint8_t>({'[', '[', 'i', 1, ']', ']'})) == json({{1}}));
|
|
}
|
|
}
|
|
|
|
TEST_CASE("UBJSON input that cannot be read is discarded by every overload")
|
|
{
|
|
std::vector<std::uint8_t> input = json::to_ubjson(json({{"a", {1, 2}}}));
|
|
input.pop_back();
|
|
|
|
json _;
|
|
CHECK_THROWS_AS(_ = json::from_ubjson(input.begin(), input.end()), json::parse_error&);
|
|
CHECK(json::from_ubjson(input, true, false).is_discarded());
|
|
CHECK(json::from_ubjson(input.begin(), input.end(), true, false).is_discarded());
|
|
#ifndef JSON_TEST_DEPRECATED_FUNCTIONS_DELETED
|
|
CHECK(json::from_ubjson(input.data(), input.size(), true, false).is_discarded());
|
|
CHECK(json::from_ubjson({input.data(), input.size()}, true, false).is_discarded());
|
|
#endif
|
|
}
|
|
|
|
TEST_CASE("UBJSON SAX parsing stops at every event")
|
|
{
|
|
// Containers are opened and closed by the loop that reads them; a SAX
|
|
// handler that rejects any event - including the end of a nested
|
|
// container - must stop the parse right there.
|
|
const auto count_events = [](const std::vector<std::uint8_t>& input)
|
|
{
|
|
int events = 0;
|
|
while (true)
|
|
{
|
|
SaxCountdown scp(events);
|
|
if (json::sax_parse(input, &scp, json::input_format_t::ubjson))
|
|
{
|
|
return events;
|
|
}
|
|
++events;
|
|
REQUIRE(events < 1000);
|
|
}
|
|
};
|
|
|
|
// 20 events: every container kind closes inside another one
|
|
const json j = json::parse(R"({"a": [1, {"b": []}], "c": {"d": [[2]]}})");
|
|
CHECK(count_events(json::to_ubjson(j)) == 20);
|
|
CHECK(count_events(json::to_ubjson(j, true)) == 20);
|
|
CHECK(count_events(json::to_ubjson(j, true, true)) == 20);
|
|
}
|
|
|
|
TEST_CASE("UBJSON optimized arrays of a valueless type are bounded")
|
|
{
|
|
// An element of type 'Z', 'T' or 'F' is encoded by its marker alone, so an
|
|
// optimized array of one of those has no payload and the declared count is
|
|
// the only thing deciding how much is allocated. Ten bytes used to produce
|
|
// billions of values (#2793); every other type costs at least one byte per
|
|
// element and is bounded by the end of the input.
|
|
json _;
|
|
|
|
SECTION("an excessive count is rejected")
|
|
{
|
|
// 'l' is a big-endian int32: 0x7FFFFFFF elements, about 34 GB of value;
|
|
// OSS-Fuzz reported this shape as a parse_ubjson_fuzzer timeout
|
|
// (testcase 6347769435193344, no issue filed)
|
|
for (const auto marker :
|
|
{'Z', 'T', 'F'
|
|
})
|
|
{
|
|
const std::vector<uint8_t> input = {'[', '$', static_cast<uint8_t>(marker), '#', 'l', 0x7F, 0xFF, 0xFF, 0xFF};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(input), "[json.exception.out_of_range.408] syntax error while parsing UBJSON size: excessive array size", json::out_of_range&);
|
|
CHECK(json::from_ubjson(input, true, false).is_discarded());
|
|
}
|
|
}
|
|
|
|
SECTION("ordinary counts are unaffected")
|
|
{
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'Z', '#', 'i', 3})) == json({nullptr, nullptr, nullptr}));
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'T', '#', 'i', 2})) == json({true, true}));
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'F', '#', 'i', 2})) == json({false, false}));
|
|
// 'N' is a no-op rather than a value, and still yields an empty array
|
|
CHECK(json::from_ubjson(std::vector<uint8_t>({'[', '$', 'N', '#', 'i', 2})) == json::array());
|
|
}
|
|
|
|
SECTION("a type with a payload is unaffected")
|
|
{
|
|
// A count past the limit is not rejected for 'U', which costs a byte
|
|
// per element and is bounded by the end of the input instead. The
|
|
// count is kept just past the limit rather than made huge, because a
|
|
// count that also exceeds the array's max_size() is reported as
|
|
// out_of_range before the input runs out, and max_size() depends on
|
|
// the width of std::size_t.
|
|
const std::vector<uint8_t> input = {'[', '$', 'U', '#', 'l', 0x00, 0x10, 0x00, 0x01};
|
|
CHECK_THROWS_WITH_AS(_ = json::from_ubjson(input), "[json.exception.parse_error.110] parse error at byte 10: syntax error while parsing UBJSON number: unexpected end of input", json::parse_error&);
|
|
CHECK(json::from_ubjson(input, true, false).is_discarded());
|
|
}
|
|
|
|
SECTION("the writer stays within what the reader accepts")
|
|
{
|
|
// below the limit the optimized form is used and is tiny; above it the
|
|
// writer falls back so that the result can still be read back
|
|
json const at_limit(1048576, nullptr);
|
|
const auto v_at_limit = json::to_ubjson(at_limit, true, true);
|
|
CHECK(v_at_limit.size() == 9);
|
|
CHECK(v_at_limit.at(1) == '$');
|
|
CHECK(json::from_ubjson(v_at_limit) == at_limit);
|
|
|
|
json const above_limit(1048577, nullptr);
|
|
const auto v_above_limit = json::to_ubjson(above_limit, true, true);
|
|
CHECK(v_above_limit.at(1) != '$');
|
|
CHECK(json::from_ubjson(v_above_limit) == above_limit);
|
|
}
|
|
}
|
|
|
|
TEST_CASE("issue #5405 - array reserve for definite-length UBJSON arrays")
|
|
{
|
|
#if !defined(JSON_NOEXCEPTION)
|
|
// this SECTION relies on catching a thrown exception to distinguish
|
|
// which of two acceptable, bounded rejections a hostile header took;
|
|
// under JSON_NOEXCEPTION, JSON_THROW never produces a catchable C++
|
|
// exception (it aborts instead), so this cannot be tested that way here
|
|
SECTION("a huge claimed length with no element data must not over-allocate")
|
|
{
|
|
// optimized form [$type#count: type 'i' (int8), count as a four-byte
|
|
// 'l' (int32) of 0x7FFFFFFF (2147483647), but no element data at all.
|
|
// max_size() for a std::vector is far larger than this count, so it
|
|
// does not reject the header outright; the (capped) reservation must
|
|
// not attempt to allocate space for billions of elements before the
|
|
// missing data is detected.
|
|
json _;
|
|
const std::vector<uint8_t> input = {'[', '$', 'i', '#', 'l', 0x7F, 0xFF, 0xFF, 0xFF};
|
|
// On a platform where std::vector<json>::max_size() is smaller than
|
|
// the claimed count (e.g. 32-bit, where max_size() is bounded by a
|
|
// 32-bit SIZE_MAX divided by sizeof(json)), the SAX consumer's own
|
|
// check rejects the header outright (out_of_range.408, with the
|
|
// claimed count in the message) instead of accepting it and only
|
|
// finding it short of data once the (capped) reservation looks for
|
|
// element bytes that were never provided (parse_error.110). Either
|
|
// is an acceptable, bounded rejection of the hostile header -- the
|
|
// property under test is that no path attempts to allocate space
|
|
// for billions of elements.
|
|
bool threw = false;
|
|
try
|
|
{
|
|
_ = json::from_ubjson(input);
|
|
}
|
|
catch (const json::parse_error& e)
|
|
{
|
|
threw = true;
|
|
CHECK(e.id == 110);
|
|
CHECK(std::string(e.what()) == "[json.exception.parse_error.110] parse error at byte 10: syntax error while parsing UBJSON number: unexpected end of input");
|
|
}
|
|
catch (const json::out_of_range& e)
|
|
{
|
|
threw = true;
|
|
CHECK(e.id == 408);
|
|
CHECK(std::string(e.what()).find("excessive array size") != std::string::npos);
|
|
}
|
|
CHECK(threw);
|
|
|
|
// json_sax_dom_parser::start_array()'s max_size() check (unlike the
|
|
// scanner's own parse_error path) throws unconditionally via
|
|
// JSON_THROW rather than going through sax->parse_error(), so it is
|
|
// not gated by allow_exceptions=false on a platform where this
|
|
// header hits that check (e.g. 32-bit, see above) -- allow either
|
|
// a discarded result or the same out_of_range it throws with
|
|
// exceptions enabled.
|
|
try
|
|
{
|
|
CHECK(json::from_ubjson(input, true, false).is_discarded());
|
|
}
|
|
catch (const json::out_of_range& e)
|
|
{
|
|
CHECK(e.id == 408);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
SECTION("arrays of various sizes decode to the same value as before the reserve optimization")
|
|
{
|
|
for (const auto size :
|
|
{
|
|
std::size_t{0}, std::size_t{1}, std::size_t{5}, // small
|
|
std::size_t{16384}, // exactly at the reserve cap
|
|
std::size_t{20000} // above the reserve cap
|
|
})
|
|
{
|
|
CAPTURE(size)
|
|
json j = json::array();
|
|
for (std::size_t i = 0; i < size; ++i)
|
|
{
|
|
j.push_back(static_cast<int>(i % 1000));
|
|
}
|
|
|
|
// exercise both the plain and the optimized [$type#count encoding
|
|
const auto packed_plain = json::to_ubjson(j);
|
|
CHECK(json::from_ubjson(packed_plain) == j);
|
|
|
|
const auto packed_optimized = json::to_ubjson(j, true, true);
|
|
CHECK(json::from_ubjson(packed_optimized) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("a user-defined SAX consumer is unaffected by the internal DOM reserve optimization")
|
|
{
|
|
// the reserve() call is local to json_sax_dom_parser / json_sax_dom_callback_parser;
|
|
// a custom SAX consumer that does not touch a DOM array sees identical events
|
|
json j = json::array();
|
|
for (int i = 0; i < 100; ++i)
|
|
{
|
|
j.push_back(i);
|
|
}
|
|
const auto packed = json::to_ubjson(j, true, true);
|
|
|
|
SaxCountdown scp(1000000); // large enough to never trigger an abort
|
|
CHECK(json::sax_parse(packed, &scp, json::input_format_t::ubjson));
|
|
}
|
|
}
|
|
|
|
|
|
TEST_CASE("Universal Binary JSON Specification Examples 1")
|
|
{
|
|
SECTION("Null Value")
|
|
{
|
|
json const j = {{"passcode", nullptr}};
|
|
std::vector<uint8_t> const v = {'{', 'i', 8, 'p', 'a', 's', 's', 'c', 'o', 'd', 'e', 'Z', '}'};
|
|
CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("No-Op Value")
|
|
{
|
|
json const j = {"foo", "bar", "baz"};
|
|
std::vector<uint8_t> const v = {'[', 'S', 'i', 3, 'f', 'o', 'o',
|
|
'S', 'i', 3, 'b', 'a', 'r',
|
|
'S', 'i', 3, 'b', 'a', 'z', ']'
|
|
};
|
|
std::vector<uint8_t> const v2 = {'[', 'S', 'i', 3, 'f', 'o', 'o', 'N',
|
|
'S', 'i', 3, 'b', 'a', 'r', 'N', 'N', 'N',
|
|
'S', 'i', 3, 'b', 'a', 'z', 'N', 'N', ']'
|
|
};
|
|
CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
CHECK(json::from_ubjson(v2) == j);
|
|
}
|
|
|
|
SECTION("Boolean Types")
|
|
{
|
|
json const j = {{"authorized", true}, {"verified", false}};
|
|
std::vector<uint8_t> const v = {'{', 'i', 10, 'a', 'u', 't', 'h', 'o', 'r', 'i', 'z', 'e', 'd', 'T',
|
|
'i', 8, 'v', 'e', 'r', 'i', 'f', 'i', 'e', 'd', 'F', '}'
|
|
};
|
|
CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("Numeric Types")
|
|
{
|
|
json const j =
|
|
{
|
|
{"int8", 16},
|
|
{"uint8", 255},
|
|
{"int16", 32767},
|
|
{"int32", 2147483647},
|
|
{"int64", 9223372036854775807},
|
|
{"float64", 113243.7863123}
|
|
};
|
|
std::vector<uint8_t> const v = {'{',
|
|
'i', 7, 'f', 'l', 'o', 'a', 't', '6', '4', 'D', 0x40, 0xfb, 0xa5, 0xbc, 0x94, 0xbc, 0x34, 0xcf,
|
|
'i', 5, 'i', 'n', 't', '1', '6', 'I', 0x7f, 0xff,
|
|
'i', 5, 'i', 'n', 't', '3', '2', 'l', 0x7f, 0xff, 0xff, 0xff,
|
|
'i', 5, 'i', 'n', 't', '6', '4', 'L', 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
'i', 4, 'i', 'n', 't', '8', 'i', 16,
|
|
'i', 5, 'u', 'i', 'n', 't', '8', 'U', 0xff,
|
|
'}'
|
|
};
|
|
CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("Char Type")
|
|
{
|
|
json const j = {{"rolecode", "a"}, {"delim", ";"}};
|
|
std::vector<uint8_t> const v = {'{', 'i', 5, 'd', 'e', 'l', 'i', 'm', 'C', ';', 'i', 8, 'r', 'o', 'l', 'e', 'c', 'o', 'd', 'e', 'C', 'a', '}'};
|
|
//CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("String Type")
|
|
{
|
|
SECTION("English")
|
|
{
|
|
json const j = "hello";
|
|
std::vector<uint8_t> const v = {'S', 'i', 5, 'h', 'e', 'l', 'l', 'o'};
|
|
CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("Russian")
|
|
{
|
|
json const j = "привет";
|
|
std::vector<uint8_t> const v = {'S', 'i', 12, 0xD0, 0xBF, 0xD1, 0x80, 0xD0, 0xB8, 0xD0, 0xB2, 0xD0, 0xB5, 0xD1, 0x82};
|
|
CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("Russian")
|
|
{
|
|
json const j = "مرحبا";
|
|
std::vector<uint8_t> const v = {'S', 'i', 10, 0xD9, 0x85, 0xD8, 0xB1, 0xD8, 0xAD, 0xD8, 0xA8, 0xD8, 0xA7};
|
|
CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("ill-formed UTF-8 (see #5529, #5651)")
|
|
{
|
|
// none of the binary format specs requires a decoder to reject
|
|
// ill-formed UTF-8 in a text string, so a value whose bytes are
|
|
// not valid UTF-8 (0xC0 0xAE is an overlong encoding of '.')
|
|
// round-trips byte for byte as a string value; to_ubjson() writes
|
|
// the bytes unchanged, as before 3.13.0, unless
|
|
// JSON_STRICT_BINARY_UTF8 is enabled (see
|
|
// unit-binary_utf8_strict.cpp)
|
|
const std::vector<uint8_t> v = {'S', 'i', 2, 0xc0, 0xae};
|
|
json j;
|
|
CHECK_NOTHROW(j = json::from_ubjson(v));
|
|
REQUIRE(j.is_string());
|
|
CHECK(j.get_ref<const json::string_t&>() == std::string("\xc0\xae"));
|
|
CHECK_THROWS_AS(utils::ignore_return_value(j.dump()), json::type_error&);
|
|
CHECK(json::from_ubjson(json::to_ubjson(j)) == j);
|
|
|
|
// the same bytes as an object key round-trip as well
|
|
const std::vector<uint8_t> v_key = {'{', 'i', 2, 0xc0, 0xae, 'i', 1, '}'};
|
|
json j_key;
|
|
CHECK_NOTHROW(j_key = json::from_ubjson(v_key));
|
|
REQUIRE(j_key.is_object());
|
|
CHECK(j_key.contains(std::string("\xc0\xae")));
|
|
CHECK(json::from_ubjson(json::to_ubjson(j_key)) == j_key);
|
|
|
|
CHECK(json::from_ubjson(json::to_ubjson(json("\xFF"))) == json("\xFF"));
|
|
// a truncated multi-byte sequence
|
|
CHECK(json::from_ubjson(json::to_ubjson(json("\xC3"))) == json("\xC3"));
|
|
// an encoded surrogate half (U+D800)
|
|
CHECK(json::from_ubjson(json::to_ubjson(json("\xED\xA0\x80"))) == json("\xED\xA0\x80"));
|
|
// an overlong encoding of '.'
|
|
CHECK(json::from_ubjson(json::to_ubjson(json("\xC0\xAF"))) == json("\xC0\xAF"));
|
|
|
|
// an object key with ill-formed UTF-8 is kept the same way
|
|
CHECK(json::from_ubjson(json::to_ubjson(json{{"\xFF", 1}})) == json{{"\xFF", 1}});
|
|
}
|
|
}
|
|
|
|
SECTION("Array Type")
|
|
{
|
|
SECTION("size=false type=false")
|
|
{
|
|
// note the float has been replaced by a double
|
|
json const j = {nullptr, true, false, 4782345193, 153.132, "ham"};
|
|
std::vector<uint8_t> const v = {'[', 'Z', 'T', 'F', 'L', 0x00, 0x00, 0x00, 0x01, 0x1D, 0x0C, 0xCB, 0xE9, 'D', 0x40, 0x63, 0x24, 0x39, 0x58, 0x10, 0x62, 0x4e, 'S', 'i', 3, 'h', 'a', 'm', ']'};
|
|
CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("size=true type=false")
|
|
{
|
|
// note the float has been replaced by a double
|
|
json const j = {nullptr, true, false, 4782345193, 153.132, "ham"};
|
|
std::vector<uint8_t> const v = {'[', '#', 'i', 6, 'Z', 'T', 'F', 'L', 0x00, 0x00, 0x00, 0x01, 0x1D, 0x0C, 0xCB, 0xE9, 'D', 0x40, 0x63, 0x24, 0x39, 0x58, 0x10, 0x62, 0x4e, 'S', 'i', 3, 'h', 'a', 'm'};
|
|
CHECK(json::to_ubjson(j, true) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("size=true type=true")
|
|
{
|
|
// note the float has been replaced by a double
|
|
json const j = {nullptr, true, false, 4782345193, 153.132, "ham"};
|
|
std::vector<uint8_t> const v = {'[', '#', 'i', 6, 'Z', 'T', 'F', 'L', 0x00, 0x00, 0x00, 0x01, 0x1D, 0x0C, 0xCB, 0xE9, 'D', 0x40, 0x63, 0x24, 0x39, 0x58, 0x10, 0x62, 0x4e, 'S', 'i', 3, 'h', 'a', 'm'};
|
|
CHECK(json::to_ubjson(j, true, true) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("Object Type")
|
|
{
|
|
SECTION("size=false type=false")
|
|
{
|
|
json const j =
|
|
{
|
|
{
|
|
"post", {
|
|
{"id", 1137},
|
|
{"author", "rkalla"},
|
|
{"timestamp", 1364482090592},
|
|
{"body", "I totally agree!"}
|
|
}
|
|
}
|
|
};
|
|
std::vector<uint8_t> const v = {'{', 'i', 4, 'p', 'o', 's', 't', '{',
|
|
'i', 6, 'a', 'u', 't', 'h', 'o', 'r', 'S', 'i', 6, 'r', 'k', 'a', 'l', 'l', 'a',
|
|
'i', 4, 'b', 'o', 'd', 'y', 'S', 'i', 16, 'I', ' ', 't', 'o', 't', 'a', 'l', 'l', 'y', ' ', 'a', 'g', 'r', 'e', 'e', '!',
|
|
'i', 2, 'i', 'd', 'I', 0x04, 0x71,
|
|
'i', 9, 't', 'i', 'm', 'e', 's', 't', 'a', 'm', 'p', 'L', 0x00, 0x00, 0x01, 0x3D, 0xB1, 0x78, 0x66, 0x60,
|
|
'}', '}'
|
|
};
|
|
CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("size=true type=false")
|
|
{
|
|
json const j =
|
|
{
|
|
{
|
|
"post", {
|
|
{"id", 1137},
|
|
{"author", "rkalla"},
|
|
{"timestamp", 1364482090592},
|
|
{"body", "I totally agree!"}
|
|
}
|
|
}
|
|
};
|
|
std::vector<uint8_t> const v = {'{', '#', 'i', 1, 'i', 4, 'p', 'o', 's', 't', '{', '#', 'i', 4,
|
|
'i', 6, 'a', 'u', 't', 'h', 'o', 'r', 'S', 'i', 6, 'r', 'k', 'a', 'l', 'l', 'a',
|
|
'i', 4, 'b', 'o', 'd', 'y', 'S', 'i', 16, 'I', ' ', 't', 'o', 't', 'a', 'l', 'l', 'y', ' ', 'a', 'g', 'r', 'e', 'e', '!',
|
|
'i', 2, 'i', 'd', 'I', 0x04, 0x71,
|
|
'i', 9, 't', 'i', 'm', 'e', 's', 't', 'a', 'm', 'p', 'L', 0x00, 0x00, 0x01, 0x3D, 0xB1, 0x78, 0x66, 0x60
|
|
};
|
|
CHECK(json::to_ubjson(j, true) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("size=true type=true")
|
|
{
|
|
json const j =
|
|
{
|
|
{
|
|
"post", {
|
|
{"id", 1137},
|
|
{"author", "rkalla"},
|
|
{"timestamp", 1364482090592},
|
|
{"body", "I totally agree!"}
|
|
}
|
|
}
|
|
};
|
|
std::vector<uint8_t> const v = {'{', '$', '{', '#', 'i', 1, 'i', 4, 'p', 'o', 's', 't', '#', 'i', 4,
|
|
'i', 6, 'a', 'u', 't', 'h', 'o', 'r', 'S', 'i', 6, 'r', 'k', 'a', 'l', 'l', 'a',
|
|
'i', 4, 'b', 'o', 'd', 'y', 'S', 'i', 16, 'I', ' ', 't', 'o', 't', 'a', 'l', 'l', 'y', ' ', 'a', 'g', 'r', 'e', 'e', '!',
|
|
'i', 2, 'i', 'd', 'I', 0x04, 0x71,
|
|
'i', 9, 't', 'i', 'm', 'e', 's', 't', 'a', 'm', 'p', 'L', 0x00, 0x00, 0x01, 0x3D, 0xB1, 0x78, 0x66, 0x60
|
|
};
|
|
CHECK(json::to_ubjson(j, true, true) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("Optimized Format")
|
|
{
|
|
SECTION("Array Example")
|
|
{
|
|
SECTION("No Optimization")
|
|
{
|
|
// note the floats have been replaced by doubles
|
|
json const j = {29.97, 31.13, 67.0, 2.113, 23.888};
|
|
std::vector<uint8_t> const v = {'[',
|
|
'D', 0x40, 0x3d, 0xf8, 0x51, 0xeb, 0x85, 0x1e, 0xb8,
|
|
'D', 0x40, 0x3f, 0x21, 0x47, 0xae, 0x14, 0x7a, 0xe1,
|
|
'D', 0x40, 0x50, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
'D', 0x40, 0x00, 0xe7, 0x6c, 0x8b, 0x43, 0x95, 0x81,
|
|
'D', 0x40, 0x37, 0xe3, 0x53, 0xf7, 0xce, 0xd9, 0x17,
|
|
']'
|
|
};
|
|
CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("Optimized with count")
|
|
{
|
|
// note the floats have been replaced by doubles
|
|
json const j = {29.97, 31.13, 67.0, 2.113, 23.888};
|
|
std::vector<uint8_t> const v = {'[', '#', 'i', 5,
|
|
'D', 0x40, 0x3d, 0xf8, 0x51, 0xeb, 0x85, 0x1e, 0xb8,
|
|
'D', 0x40, 0x3f, 0x21, 0x47, 0xae, 0x14, 0x7a, 0xe1,
|
|
'D', 0x40, 0x50, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
'D', 0x40, 0x00, 0xe7, 0x6c, 0x8b, 0x43, 0x95, 0x81,
|
|
'D', 0x40, 0x37, 0xe3, 0x53, 0xf7, 0xce, 0xd9, 0x17
|
|
};
|
|
CHECK(json::to_ubjson(j, true) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("Optimized with type & count")
|
|
{
|
|
// note the floats have been replaced by doubles
|
|
json const j = {29.97, 31.13, 67.0, 2.113, 23.888};
|
|
std::vector<uint8_t> const v = {'[', '$', 'D', '#', 'i', 5,
|
|
0x40, 0x3d, 0xf8, 0x51, 0xeb, 0x85, 0x1e, 0xb8,
|
|
0x40, 0x3f, 0x21, 0x47, 0xae, 0x14, 0x7a, 0xe1,
|
|
0x40, 0x50, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x40, 0x00, 0xe7, 0x6c, 0x8b, 0x43, 0x95, 0x81,
|
|
0x40, 0x37, 0xe3, 0x53, 0xf7, 0xce, 0xd9, 0x17
|
|
};
|
|
CHECK(json::to_ubjson(j, true, true) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("Object Example")
|
|
{
|
|
SECTION("No Optimization")
|
|
{
|
|
// note the floats have been replaced by doubles
|
|
json const j = { {"lat", 29.976}, {"long", 31.131}, {"alt", 67.0} };
|
|
std::vector<uint8_t> const v = {'{',
|
|
'i', 3, 'a', 'l', 't', 'D', 0x40, 0x50, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
'i', 3, 'l', 'a', 't', 'D', 0x40, 0x3d, 0xf9, 0xdb, 0x22, 0xd0, 0xe5, 0x60,
|
|
'i', 4, 'l', 'o', 'n', 'g', 'D', 0x40, 0x3f, 0x21, 0x89, 0x37, 0x4b, 0xc6, 0xa8,
|
|
'}'
|
|
};
|
|
CHECK(json::to_ubjson(j) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("Optimized with count")
|
|
{
|
|
// note the floats have been replaced by doubles
|
|
json const j = { {"lat", 29.976}, {"long", 31.131}, {"alt", 67.0} };
|
|
std::vector<uint8_t> const v = {'{', '#', 'i', 3,
|
|
'i', 3, 'a', 'l', 't', 'D', 0x40, 0x50, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
'i', 3, 'l', 'a', 't', 'D', 0x40, 0x3d, 0xf9, 0xdb, 0x22, 0xd0, 0xe5, 0x60,
|
|
'i', 4, 'l', 'o', 'n', 'g', 'D', 0x40, 0x3f, 0x21, 0x89, 0x37, 0x4b, 0xc6, 0xa8
|
|
};
|
|
CHECK(json::to_ubjson(j, true) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
|
|
SECTION("Optimized with type & count")
|
|
{
|
|
// note the floats have been replaced by doubles
|
|
json const j = { {"lat", 29.976}, {"long", 31.131}, {"alt", 67.0} };
|
|
std::vector<uint8_t> const v = {'{', '$', 'D', '#', 'i', 3,
|
|
'i', 3, 'a', 'l', 't', 0x40, 0x50, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
'i', 3, 'l', 'a', 't', 0x40, 0x3d, 0xf9, 0xdb, 0x22, 0xd0, 0xe5, 0x60,
|
|
'i', 4, 'l', 'o', 'n', 'g', 0x40, 0x3f, 0x21, 0x89, 0x37, 0x4b, 0xc6, 0xa8
|
|
};
|
|
CHECK(json::to_ubjson(j, true, true) == v);
|
|
CHECK(json::from_ubjson(v) == j);
|
|
}
|
|
}
|
|
|
|
SECTION("Special Cases (Null, No-Op and Boolean)")
|
|
{
|
|
SECTION("Array")
|
|
{
|
|
std::vector<uint8_t> const v = {'[', '$', 'N', '#', 'I', 0x02, 0x00};
|
|
CHECK(json::from_ubjson(v) == json::array());
|
|
}
|
|
|
|
SECTION("Object")
|
|
{
|
|
std::vector<uint8_t> const v = {'{', '$', 'Z', '#', 'i', 3, 'i', 4, 'n', 'a', 'm', 'e', 'i', 8, 'p', 'a', 's', 's', 'w', 'o', 'r', 'd', 'i', 5, 'e', 'm', 'a', 'i', 'l'};
|
|
CHECK(json::from_ubjson(v) == json({ {"name", nullptr}, {"password", nullptr}, {"email", nullptr} }));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
TEST_CASE("Parse UBJSON directly from a file using iterator and sentinel")
|
|
{
|
|
std::string const filename = TEST_DATA_DIRECTORY "/json_testsuite/sample.json.ubjson";
|
|
std::ifstream file(filename, std::ios::binary);
|
|
const std::istreambuf_iterator<char> first(file);
|
|
const json parsed = json::from_ubjson(first, utils::istreambuf_sentinel{});
|
|
CHECK((parsed.is_object() || parsed.is_array()));
|
|
}
|
|
|
|
#if !defined(JSON_NOEXCEPTION)
|
|
TEST_CASE("all UBJSON first bytes")
|
|
{
|
|
// these bytes will fail immediately with exception parse_error.112
|
|
std::set<uint8_t> supported =
|
|
{
|
|
'T', 'F', 'Z', 'U', 'i', 'I', 'l', 'L', 'd', 'D', 'C', 'S', '[', '{', 'N', 'H'
|
|
};
|
|
|
|
for (auto i = 0; i < 256; ++i)
|
|
{
|
|
const auto byte = static_cast<uint8_t>(i);
|
|
CAPTURE(byte)
|
|
|
|
try
|
|
{
|
|
auto res = json::from_ubjson(std::vector<uint8_t>(1, byte));
|
|
}
|
|
catch (const json::parse_error& e)
|
|
{
|
|
// check that parse_error.112 is only thrown if the
|
|
// first byte is not in the supported set
|
|
INFO_WITH_TEMP(e.what());
|
|
if (supported.find(byte) == supported.end())
|
|
{
|
|
CHECK(e.id == 112);
|
|
}
|
|
else
|
|
{
|
|
CHECK(e.id != 112);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
TEST_CASE("UBJSON use_type requires use_size")
|
|
{
|
|
SECTION("non-empty array throws other_error.502")
|
|
{
|
|
const json j = {1, 2, 3};
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j, false, true),
|
|
"[json.exception.other_error.502] use_type requires use_size = true",
|
|
json::other_error&);
|
|
}
|
|
|
|
SECTION("non-empty object throws other_error.502")
|
|
{
|
|
const json j = {{"a", 1}, {"b", 2}};
|
|
CHECK_THROWS_WITH_AS(json::to_ubjson(j, false, true),
|
|
"[json.exception.other_error.502] use_type requires use_size = true",
|
|
json::other_error&);
|
|
}
|
|
|
|
SECTION("scalars do not throw with use_type=true, use_count=false")
|
|
{
|
|
CHECK_NOTHROW(json::to_ubjson(42, false, true));
|
|
CHECK_NOTHROW(json::to_ubjson(3.14, false, true));
|
|
CHECK_NOTHROW(json::to_ubjson("hello", false, true));
|
|
CHECK_NOTHROW(json::to_ubjson(true, false, true));
|
|
CHECK_NOTHROW(json::to_ubjson(nullptr, false, true));
|
|
}
|
|
|
|
SECTION("empty containers do not throw with use_type=true, use_count=false")
|
|
{
|
|
CHECK_NOTHROW(json::to_ubjson(json::array(), false, true));
|
|
CHECK_NOTHROW(json::to_ubjson(json::object(), false, true));
|
|
}
|
|
|
|
SECTION("valid combinations on non-empty containers")
|
|
{
|
|
const json j = {1, 2, 3};
|
|
CHECK_NOTHROW(json::to_ubjson(j, false, false));
|
|
CHECK_NOTHROW(json::to_ubjson(j, true, false));
|
|
CHECK_NOTHROW(json::to_ubjson(j, true, true));
|
|
}
|
|
}
|
|
|
|
TEST_CASE("UBJSON round-trip invariants")
|
|
{
|
|
// This checks what the parse_ubjson_fuzzer driver checks (see
|
|
// tests/src/fuzzer-parse_ubjson.cpp), so that a regression shows up in CI
|
|
// rather than as an OSS-Fuzz report: every value from_ubjson() returns
|
|
// (j1) can be serialized with any combination of options, the result can
|
|
// be parsed back (j2), and serializing j2 again with the same options
|
|
// reproduces the exact bytes. Beyond the driver, this also checks that j2
|
|
// equals j1. Values are compared with dump() rather than operator==,
|
|
// because a NaN never compares equal to itself.
|
|
struct options
|
|
{
|
|
bool use_size;
|
|
bool use_type;
|
|
};
|
|
const std::vector<options> all_options =
|
|
{
|
|
{false, false},
|
|
{true, false},
|
|
{true, true},
|
|
};
|
|
|
|
for (const auto& j0 : utils::round_trip_corpus::values())
|
|
{
|
|
// turn the corpus value into a value as from_ubjson() returns it; this
|
|
// has no binary values, as UBJSON writes them as arrays of integers
|
|
for (const auto& initial : all_options)
|
|
{
|
|
const json j1 = json::from_ubjson(json::to_ubjson(j0, initial.use_size, initial.use_type));
|
|
|
|
for (const auto& o : all_options)
|
|
{
|
|
INFO("j1 = " << j1.dump() << ", use_size = " << o.use_size << ", use_type = " << o.use_type);
|
|
|
|
const std::vector<std::uint8_t> vec = json::to_ubjson(j1, o.use_size, o.use_type);
|
|
json j2;
|
|
// anything the library writes must be parsable by the library
|
|
REQUIRE_NOTHROW(j2 = json::from_ubjson(vec));
|
|
CHECK(j2.dump() == j1.dump());
|
|
CHECK(json::to_ubjson(j2, o.use_size, o.use_type) == vec);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
TEST_CASE("UBJSON roundtrips" * doctest::skip())
|
|
{
|
|
SECTION("input from self-generated UBJSON files")
|
|
{
|
|
for (std::string filename :
|
|
{
|
|
TEST_DATA_DIRECTORY "/json_nlohmann_tests/all_unicode.json",
|
|
TEST_DATA_DIRECTORY "/json.org/1.json",
|
|
TEST_DATA_DIRECTORY "/json.org/2.json",
|
|
TEST_DATA_DIRECTORY "/json.org/3.json",
|
|
TEST_DATA_DIRECTORY "/json.org/4.json",
|
|
TEST_DATA_DIRECTORY "/json.org/5.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip01.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip02.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip03.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip04.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip05.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip06.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip07.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip08.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip09.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip10.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip11.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip12.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip13.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip14.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip15.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip16.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip17.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip18.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip19.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip20.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip21.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip22.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip23.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip24.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip25.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip26.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip27.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip28.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip29.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip30.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip31.json",
|
|
TEST_DATA_DIRECTORY "/json_roundtrip/roundtrip32.json",
|
|
TEST_DATA_DIRECTORY "/json_testsuite/sample.json",
|
|
TEST_DATA_DIRECTORY "/json_tests/pass1.json",
|
|
TEST_DATA_DIRECTORY "/json_tests/pass2.json",
|
|
TEST_DATA_DIRECTORY "/json_tests/pass3.json"
|
|
})
|
|
{
|
|
CAPTURE(filename)
|
|
|
|
std::ifstream f_json(filename);
|
|
json const j1 = json::parse(f_json);
|
|
auto const packed = utils::read_binary_file(filename + ".ubjson");
|
|
|
|
{
|
|
INFO_WITH_TEMP(filename + ": std::vector<uint8_t>");
|
|
json j2;
|
|
CHECK_NOTHROW(j2 = json::from_ubjson(packed));
|
|
CHECK(j1 == j2);
|
|
}
|
|
|
|
{
|
|
INFO_WITH_TEMP(filename + ": std::ifstream");
|
|
std::ifstream f_ubjson(filename + ".ubjson", std::ios::binary);
|
|
json j2;
|
|
CHECK_NOTHROW(j2 = json::from_ubjson(f_ubjson));
|
|
CHECK(j1 == j2);
|
|
}
|
|
|
|
#ifndef JSON_TEST_DEPRECATED_FUNCTIONS_DELETED
|
|
{
|
|
INFO_WITH_TEMP(filename + ": uint8_t* and size");
|
|
json j2;
|
|
CHECK_NOTHROW(j2 = json::from_ubjson({packed.data(), packed.size()}));
|
|
CHECK(j1 == j2);
|
|
}
|
|
#endif
|
|
|
|
{
|
|
INFO_WITH_TEMP(filename + ": output to output adapters");
|
|
{
|
|
INFO_WITH_TEMP(filename + ": output adapters: std::vector<uint8_t>");
|
|
std::vector<uint8_t> vec;
|
|
json::to_ubjson(j1, vec);
|
|
CHECK(vec == packed);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
TEST_CASE("UBJSON optimized array of unsigned integers beyond int64")
|
|
{
|
|
// UBJSON has no unsigned 64-bit type, so such values are written as
|
|
// high-precision numbers - also as the type of an optimized container
|
|
const json j = {18446744073709551615ULL, 9223372036854775808ULL};
|
|
const std::vector<std::uint8_t> expected =
|
|
{
|
|
'[', '$', 'H', '#', 'i', 2,
|
|
'i', 20, '1', '8', '4', '4', '6', '7', '4', '4', '0', '7', '3', '7', '0', '9', '5', '5', '1', '6', '1', '5',
|
|
'i', 19, '9', '2', '2', '3', '3', '7', '2', '0', '3', '6', '8', '5', '4', '7', '7', '5', '8', '0', '8'
|
|
};
|
|
CHECK(json::to_ubjson(j, true, true) == expected);
|
|
CHECK(json::from_ubjson(expected) == j);
|
|
}
|
|
|
|
namespace
|
|
{
|
|
// the bytes that follow the marker of an integer: the value in the width of
|
|
// the marker (big endian for UBJSON, little endian for BJData), or, for a
|
|
// high-precision number, the length and the decimal digits
|
|
std::vector<std::uint8_t> integer_payload(const char marker, const json& value, const bool little_endian)
|
|
{
|
|
std::size_t width = 0;
|
|
switch (marker)
|
|
{
|
|
case 'i':
|
|
case 'U':
|
|
width = 1;
|
|
break;
|
|
case 'I':
|
|
case 'u':
|
|
width = 2;
|
|
break;
|
|
case 'l':
|
|
case 'm':
|
|
width = 4;
|
|
break;
|
|
case 'L':
|
|
case 'M':
|
|
width = 8;
|
|
break;
|
|
default:
|
|
{
|
|
const std::string digits = value.dump();
|
|
std::vector<std::uint8_t> result = {'i', static_cast<std::uint8_t>(digits.size())};
|
|
for (const char c : digits)
|
|
{
|
|
result.push_back(static_cast<std::uint8_t>(c));
|
|
}
|
|
return result;
|
|
}
|
|
}
|
|
|
|
const std::uint64_t bits = value.is_number_unsigned()
|
|
? value.get<std::uint64_t>()
|
|
: static_cast<std::uint64_t>(value.get<std::int64_t>());
|
|
std::vector<std::uint8_t> result(width);
|
|
for (std::size_t i = 0; i < width; ++i)
|
|
{
|
|
result[little_endian ? i : width - 1 - i] = static_cast<std::uint8_t>(bits >> (8 * i));
|
|
}
|
|
return result;
|
|
}
|
|
|
|
json i64(const std::int64_t v)
|
|
{
|
|
return v;
|
|
}
|
|
|
|
json u64(const std::uint64_t v)
|
|
{
|
|
return v;
|
|
}
|
|
} // namespace
|
|
|
|
TEST_CASE("UBJSON and BJData integer markers at every range edge")
|
|
{
|
|
// An optimized container announces the marker of its values after `$` and
|
|
// then writes every value without a marker, so the marker the writer
|
|
// announces and the width it writes must match for every value. This
|
|
// checks both for the values around each edge of the integer types, as
|
|
// scalars and as the values of optimized arrays and objects.
|
|
struct integer_case
|
|
{
|
|
json value;
|
|
char ubjson; // expected UBJSON marker
|
|
char bjdata; // expected BJData marker
|
|
};
|
|
|
|
const std::int64_t int64_min = (std::numeric_limits<std::int64_t>::min)();
|
|
const std::int64_t int64_max = (std::numeric_limits<std::int64_t>::max)();
|
|
const std::uint64_t uint64_max = (std::numeric_limits<std::uint64_t>::max)();
|
|
|
|
const std::vector<integer_case> cases =
|
|
{
|
|
// int8
|
|
{i64(-129), 'I', 'I'},
|
|
{i64(-128), 'i', 'i'},
|
|
{i64(-127), 'i', 'i'},
|
|
{i64(-1), 'i', 'i'},
|
|
{i64(0), 'i', 'i'},
|
|
{u64(0), 'i', 'i'},
|
|
{i64(126), 'i', 'i'},
|
|
{i64(127), 'i', 'i'},
|
|
{u64(127), 'i', 'i'},
|
|
{i64(128), 'U', 'U'},
|
|
{u64(128), 'U', 'U'},
|
|
// uint8
|
|
{i64(254), 'U', 'U'},
|
|
{i64(255), 'U', 'U'},
|
|
{u64(255), 'U', 'U'},
|
|
{i64(256), 'I', 'I'},
|
|
{u64(256), 'I', 'I'},
|
|
// int16
|
|
{i64(-32769), 'l', 'l'},
|
|
{i64(-32768), 'I', 'I'},
|
|
{i64(-32767), 'I', 'I'},
|
|
{i64(32766), 'I', 'I'},
|
|
{i64(32767), 'I', 'I'},
|
|
{u64(32767), 'I', 'I'},
|
|
{i64(32768), 'l', 'u'},
|
|
{u64(32768), 'l', 'u'},
|
|
// uint16 (BJData only)
|
|
{i64(65534), 'l', 'u'},
|
|
{i64(65535), 'l', 'u'},
|
|
{u64(65535), 'l', 'u'},
|
|
{i64(65536), 'l', 'l'},
|
|
{u64(65536), 'l', 'l'},
|
|
// int32
|
|
{i64(-2147483649LL), 'L', 'L'},
|
|
{i64(-2147483648LL), 'l', 'l'},
|
|
{i64(-2147483647LL), 'l', 'l'},
|
|
{i64(2147483646LL), 'l', 'l'},
|
|
{i64(2147483647LL), 'l', 'l'},
|
|
{u64(2147483647ULL), 'l', 'l'},
|
|
{i64(2147483648LL), 'L', 'm'},
|
|
{u64(2147483648ULL), 'L', 'm'},
|
|
// uint32 (BJData only)
|
|
{i64(4294967294LL), 'L', 'm'},
|
|
{i64(4294967295LL), 'L', 'm'},
|
|
{u64(4294967295ULL), 'L', 'm'},
|
|
{i64(4294967296LL), 'L', 'L'},
|
|
{u64(4294967296ULL), 'L', 'L'},
|
|
// int64
|
|
{i64(int64_min), 'L', 'L'},
|
|
{i64(int64_min + 1), 'L', 'L'},
|
|
{i64(int64_max - 1), 'L', 'L'},
|
|
{i64(int64_max), 'L', 'L'},
|
|
{u64(static_cast<std::uint64_t>(int64_max)), 'L', 'L'},
|
|
// uint64 (BJData only; UBJSON writes a high-precision number)
|
|
{u64(static_cast<std::uint64_t>(int64_max) + 1), 'H', 'M'},
|
|
{u64(uint64_max - 1), 'H', 'M'},
|
|
{u64(uint64_max), 'H', 'M'},
|
|
};
|
|
|
|
for (const auto& c : cases)
|
|
{
|
|
for (const bool bjdata :
|
|
{
|
|
false, true
|
|
})
|
|
{
|
|
const char marker = bjdata ? c.bjdata : c.ubjson;
|
|
const std::vector<std::uint8_t> payload = integer_payload(marker, c.value, bjdata);
|
|
const auto to_binary = [bjdata](const json & j, const bool use_size, const bool use_type)
|
|
{
|
|
return bjdata ? json::to_bjdata(j, use_size, use_type) : json::to_ubjson(j, use_size, use_type);
|
|
};
|
|
const auto from_binary = [bjdata](const std::vector<std::uint8_t>& v)
|
|
{
|
|
return bjdata ? json::from_bjdata(v) : json::from_ubjson(v);
|
|
};
|
|
INFO("value = " << c.value.dump() << (c.value.is_number_unsigned() ? " (unsigned)" : "") << ", format = " << (bjdata ? "BJData" : "UBJSON"));
|
|
|
|
// scalar
|
|
std::vector<std::uint8_t> expected = {static_cast<std::uint8_t>(marker)};
|
|
expected.insert(expected.end(), payload.begin(), payload.end());
|
|
for (const bool use_size :
|
|
{
|
|
false, true
|
|
})
|
|
{
|
|
CHECK(to_binary(c.value, use_size, false) == expected);
|
|
}
|
|
CHECK(from_binary(expected) == c.value);
|
|
|
|
const json arr = {c.value, c.value, c.value};
|
|
|
|
// array without count or type: every value has its marker
|
|
expected = {'['};
|
|
for (int i = 0; i < 3; ++i)
|
|
{
|
|
expected.push_back(static_cast<std::uint8_t>(marker));
|
|
expected.insert(expected.end(), payload.begin(), payload.end());
|
|
}
|
|
expected.push_back(']');
|
|
CHECK(to_binary(arr, false, false) == expected);
|
|
CHECK(from_binary(expected) == arr);
|
|
|
|
// array with count: every value has its marker
|
|
expected = {'[', '#', 'i', 3};
|
|
for (int i = 0; i < 3; ++i)
|
|
{
|
|
expected.push_back(static_cast<std::uint8_t>(marker));
|
|
expected.insert(expected.end(), payload.begin(), payload.end());
|
|
}
|
|
CHECK(to_binary(arr, true, false) == expected);
|
|
CHECK(from_binary(expected) == arr);
|
|
|
|
// array with type and count: the marker once, then the payloads
|
|
expected = {'[', '$', static_cast<std::uint8_t>(marker), '#', 'i', 3};
|
|
for (int i = 0; i < 3; ++i)
|
|
{
|
|
expected.insert(expected.end(), payload.begin(), payload.end());
|
|
}
|
|
CHECK(to_binary(arr, true, true) == expected);
|
|
CHECK(from_binary(expected) == arr);
|
|
|
|
// object with type and count: the marker once, then key and payload
|
|
const json obj = {{"a", c.value}, {"b", c.value}};
|
|
expected = {'{', '$', static_cast<std::uint8_t>(marker), '#', 'i', 2};
|
|
for (const char key :
|
|
{'a', 'b'
|
|
})
|
|
{
|
|
expected.push_back('i');
|
|
expected.push_back(1);
|
|
expected.push_back(static_cast<std::uint8_t>(key));
|
|
expected.insert(expected.end(), payload.begin(), payload.end());
|
|
}
|
|
CHECK(to_binary(obj, true, true) == expected);
|
|
CHECK(from_binary(expected) == obj);
|
|
}
|
|
}
|
|
}
|
|
|
|
TEST_CASE("UBJSON large strings (chunked reader)")
|
|
{
|
|
// get_ubjson_string() reads through get_string(), which reads in bounded
|
|
// chunks (binary_reader.hpp, chunk_size == 4096); make sure roundtripping
|
|
// is correct for lengths around and beyond that chunk size, for both
|
|
// vector (iterator) and pointer inputs.
|
|
//
|
|
// A binary value is not included here: plain UBJSON (unlike BJData, see
|
|
// the "BJData large strings and binaries" test) has no reader-side binary
|
|
// type, so even the optimized uint8_t-array encoding of a binary value is
|
|
// read back element-by-element as a JSON array of numbers rather than
|
|
// through get_binary() - it never reaches the chunked path this test is
|
|
// about (see the "roundtrip only works to an array of numbers" case
|
|
// above).
|
|
for (const std::size_t len :
|
|
{
|
|
std::size_t{0}, std::size_t{1}, std::size_t{4095}, std::size_t{4096},
|
|
std::size_t{4097}, std::size_t{8192}, std::size_t{100000}
|
|
})
|
|
{
|
|
CAPTURE(len)
|
|
|
|
const json j_string = std::string(len, 'x');
|
|
const std::vector<std::uint8_t> v_string = json::to_ubjson(j_string);
|
|
CHECK(json::from_ubjson(v_string) == j_string);
|
|
// pointer input exercises the std::memcpy fast path
|
|
CHECK(json::from_ubjson(reinterpret_cast<const char*>(v_string.data()),
|
|
reinterpret_cast<const char*>(v_string.data()) + v_string.size()) == j_string);
|
|
|
|
// a truncated payload must still be reported as an error
|
|
if (len > 16)
|
|
{
|
|
std::vector<std::uint8_t> truncated = v_string;
|
|
truncated.resize(truncated.size() - 8);
|
|
json _;
|
|
CHECK_THROWS_AS(_ = json::from_ubjson(truncated), json::parse_error);
|
|
}
|
|
}
|
|
}
|