Remove some assert()

Add missing extras and extensions fields

.github/FUNDING.yml

@@ -0,0 +1,13 @@
+# These are supported funding model platforms
+
+github: syoyo
+#patreon: # Replace with a single Patreon username
+#open_collective: # Replace with a single Open Collective username
+#ko_fi: # Replace with a single Ko-fi username
+#tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
+#community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
+#liberapay: # Replace with a single Liberapay username
+#issuehunt: # Replace with a single IssueHunt username
+#otechie: # Replace with a single Otechie username
+#lfx_crowdfunding: # Replace with a single LFX Crowdfunding project-name e.g., cloud-foundry
+#custom: # Replace with up to 4 custom sponsorship URLs e.g., ['link1', 'link2']

.github/workflows/c-cpp.yml

@@ -4,41 +4,43 @@ on: [push, pull_request]
 
 jobs:
 
-  # compile with older gcc4.8
+  # gcc4.8 is too old and ubuntu-18.04 image is not supported in GitHub Actions anymore,
-  build-gcc48:
+  # so disable this build.
+  ## compile with older gcc4.8
+  #build-gcc48:
 
-    runs-on: ubuntu-18.04
+  #  runs-on: ubuntu-18.04
-    name: Build with gcc 4.8
+  #  name: Build with gcc 4.8
 
-    steps:
+  #  steps:
-      - name: Checkout
+  #    - name: Checkout
-        uses: actions/checkout@v1
+  #      uses: actions/checkout@v1
 
-      - name: Build
+  #    - name: Build
-        run: |
+  #      run: |
-            sudo apt-get update
+  #          sudo apt-get update
-            sudo apt-get install -y build-essential
+  #          sudo apt-get install -y build-essential
-            sudo apt-get install -y gcc-4.8 g++-4.8
+  #          sudo apt-get install -y gcc-4.8 g++-4.8
-            g++-4.8 -std=c++11 -o loader_example loader_example.cc
+  #          g++-4.8 -std=c++11 -o loader_example loader_example.cc
 
-      - name: NoexceptBuild
+  #    - name: NoexceptBuild
-        run: |
+  #      run: |
-            g++-4.8 -DTINYGLTF_NOEXCEPTION -std=c++11 -o loader_example loader_example.cc
+  #          g++-4.8 -DTINYGLTF_NOEXCEPTION -std=c++11 -o loader_example loader_example.cc
 
-      - name: RapidjsonBuild
+  #    - name: RapidjsonBuild
-        run: |
+  #      run: |
-            git clone https://github.com/Tencent/rapidjson
+  #          git clone https://github.com/Tencent/rapidjson
-            g++-4.8 -DTINYGLTF_USE_RAPIDJSON -I./rapidjson/include/rapidjson -std=c++11 -o loader_example loader_example.cc
+  #          g++-4.8 -DTINYGLTF_USE_RAPIDJSON -I./rapidjson/include/rapidjson -std=c++11 -o loader_example loader_example.cc
 
   # compile with mingw gcc cross
   build-mingw-cross:
 
-    runs-on: ubuntu-18.04
+    runs-on: ubuntu-latest
     name: Build with MinGW gcc cross
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v1
+        uses: actions/checkout@v2
 
       - name: Build
         run: |
@@ -47,7 +49,8 @@ jobs:
             sudo apt-get install -y mingw-w64
             x86_64-w64-mingw32-g++ -std=c++11 -o loader_example loader_example.cc
 
-  # Windows(x64) + Visual Studio 2019 build
+  # Windows(x64) + Visual Studio 2022 build
+  # Assume windows-latest have VS2022 installed
   build-windows-msvc:
 
     runs-on: windows-latest
@@ -62,7 +65,8 @@ jobs:
         run: |
           mkdir build
           cd build
-          cmake -G "Visual Studio 16 2019" -DTINYGLTF_BUILD_LOADER_EXAMPLE=On -DTINYGLTF_BUILD_GL_EXAMPLES=Off -DTINYGLTF_BUILD_VALIDATOR_EXAMPLE=On ..
+          cmake --help
+          cmake -G "Visual Studio 17 2022" -A x64 -DTINYGLTF_BUILD_LOADER_EXAMPLE=On -DTINYGLTF_BUILD_GL_EXAMPLES=Off -DTINYGLTF_BUILD_VALIDATOR_EXAMPLE=On ..
           cd ..
       - name: Build
         run: cmake --build build --config Release
@@ -131,20 +135,20 @@ jobs:
   # Cross-compile for aarch64 linux target
   build-cross-aarch64:
 
-    runs-on: ubuntu-18.04
+    runs-on: ubuntu-latest
     name: Build on cross aarch64
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v1
+        uses: actions/checkout@v2
       - name: Build
         run: |
             sudo apt-get update
             sudo apt-get install -y build-essential
-            sudo apt-get install -y gcc-8-aarch64-linux-gnu g++-8-aarch64-linux-gnu
+            sudo apt-get install -y gcc-aarch64-linux-gnu g++-aarch64-linux-gnu
 
             git clone https://github.com/Tencent/rapidjson
-            aarch64-linux-gnu-g++-8 -DTINYGLTF_USE_RAPIDJSON -I./rapidjson/include/rapidjson -std=c++11 -g -O0 -o loader_example loader_example.cc
+            aarch64-linux-gnu-g++ -DTINYGLTF_USE_RAPIDJSON -I./rapidjson/include/rapidjson -std=c++11 -g -O0 -o loader_example loader_example.cc
 
   # macOS clang
   build-macos:

.github/workflows/codeql-analysis.yml

@@ -0,0 +1,72 @@
+# For most projects, this workflow file will not need changing; you simply need
+# to commit it to your repository.
+#
+# You may wish to alter this file to override the set of languages analyzed,
+# or to provide custom queries or build logic.
+#
+# ******** NOTE ********
+# We have attempted to detect the languages in your repository. Please check
+# the `language` matrix defined below to confirm you have the correct set of
+# supported CodeQL languages.
+#
+name: "CodeQL"
+
+on:
+  push:
+    branches: [ "master" ]
+  pull_request:
+    # The branches below must be a subset of the branches above
+    branches: [ "master" ]
+  schedule:
+    - cron: '21 20 * * 5'
+
+jobs:
+  analyze:
+    name: Analyze
+    runs-on: ubuntu-latest
+    permissions:
+      actions: read
+      contents: read
+      security-events: write
+
+    strategy:
+      fail-fast: false
+      matrix:
+        language: [ 'cpp', 'python' ]
+        # CodeQL supports [ 'cpp', 'csharp', 'go', 'java', 'javascript', 'python', 'ruby' ]
+        # Learn more about CodeQL language support at https://aka.ms/codeql-docs/language-support
+
+    steps:
+    - name: Checkout repository
+      uses: actions/checkout@v3
+
+    # Initializes the CodeQL tools for scanning.
+    - name: Initialize CodeQL
+      uses: github/codeql-action/init@v2
+      with:
+        languages: ${{ matrix.language }}
+        # If you wish to specify custom queries, you can do so here or in a config file.
+        # By default, queries listed here will override any specified in a config file.
+        # Prefix the list here with "+" to use these queries and those in the config file.
+        
+        # Details on CodeQL's query packs refer to : https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
+        # queries: security-extended,security-and-quality
+
+        
+    # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
+    # If this step fails, then you should remove it and run the build manually (see below)
+    - name: Autobuild
+      uses: github/codeql-action/autobuild@v2
+
+    # ℹ️ Command-line programs to run using the OS shell.
+    # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
+
+    #   If the Autobuild fails above, remove it and uncomment the following three lines. 
+    #   modify them (or add more) to build your code if your project, please refer to the EXAMPLE below for guidance.
+
+    # - run: |
+    #   echo "Run, Build Application using script"
+    #   ./location_of_script_within_repo/buildscript.sh
+
+    - name: Perform CodeQL Analysis
+      uses: github/codeql-action/analyze@v2

.gitignore

@@ -68,4 +68,11 @@ loader_example
 tests/tester
 tests/tester_noexcept
 tests/issue-97.gltf
+tests/issue-261.gltf
 
+# unignore
+!Makefile
+!examples/build-gltf/Makefile
+!examples/raytrace/cornellbox_suzanne.obj
+!tests/Makefile
+!tools/windows/premake5.exe

CMakeLists.txt

@@ -2,11 +2,17 @@ cmake_minimum_required(VERSION 3.6)
 
 PROJECT (tinygltf)
 
+include(GNUInstallDirs)
+include(CMakePackageConfigHelpers)
+
 SET(CMAKE_CXX_STANDARD 11)
 
-option(TINYGLTF_BUILD_LOADER_EXAMPLE "Build loader_example" ON)
+option(TINYGLTF_BUILD_LOADER_EXAMPLE "Build loader_example(load glTF and dump infos)" ON)
 option(TINYGLTF_BUILD_GL_EXAMPLES "Build GL exampels(requires glfw, OpenGL, etc)" OFF)
 option(TINYGLTF_BUILD_VALIDATOR_EXAMPLE "Build validator exampe" OFF)
+option(TINYGLTF_BUILD_BUILDER_EXAMPLE "Build glTF builder example" OFF)
+option(TINYGLTF_HEADER_ONLY "On: header-only mode. Off: create tinygltf library(No TINYGLTF_IMPLEMENTATION required in your project)" OFF)
+option(TINYGLTF_INSTALL "Install tinygltf files during install step. Usually set to OFF if you include tinygltf through add_subdirectory()" ON)
 
 if (TINYGLTF_BUILD_LOADER_EXAMPLE)
   ADD_EXECUTABLE ( loader_example
@@ -22,20 +28,49 @@ endif (TINYGLTF_BUILD_GL_EXAMPLES)
 if (TINYGLTF_BUILD_VALIDATOR_EXAMPLE)
   ADD_SUBDIRECTORY ( examples/validator )
 endif (TINYGLTF_BUILD_VALIDATOR_EXAMPLE)
+
+if (TINYGLTF_BUILD_BUILDER_EXAMPLE)
+  ADD_SUBDIRECTORY ( examples/build-gltf )
+endif (TINYGLTF_BUILD_BUILDER_EXAMPLE)
+
 #
-# TinuGLTF is a header-only library, so no library build. just install header files.
+# for add_subdirectory and standalone build
 #
-INSTALL ( FILES
+if (TINYGLTF_HEADER_ONLY)
-  json.hpp
+  add_library(tinygltf INTERFACE)
-  stb_image.h
+
-  stb_image_write.h
+  target_include_directories(tinygltf
-  tiny_gltf.h
+          INTERFACE
-  DESTINATION
+          $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}>
-  include
+          $<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>
   )
 
-INSTALL ( FILES
+else (TINYGLTF_HEADER_ONLY)
-  cmake/TinyGLTFConfig.cmake
+  add_library(tinygltf)
-  DESTINATION
+  target_sources(tinygltf PRIVATE
-  cmake
+          ${CMAKE_CURRENT_SOURCE_DIR}/tiny_gltf.cc)
-  )
+  target_include_directories(tinygltf
+          INTERFACE
+          $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}>
+          $<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>
+          )
+endif (TINYGLTF_HEADER_ONLY)
+
+if (TINYGLTF_INSTALL)
+  install(TARGETS tinygltf EXPORT tinygltfTargets)
+  install(EXPORT tinygltfTargets NAMESPACE tinygltf:: FILE TinyGLTFTargets.cmake DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake)
+  configure_package_config_file(${CMAKE_CURRENT_SOURCE_DIR}/cmake/TinyGLTFConfig.cmake.in ${CMAKE_CURRENT_BINARY_DIR}/TinyGLTFConfig.cmake INSTALL_DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake)
+  install(FILES ${CMAKE_CURRENT_BINARY_DIR}/TinyGLTFConfig.cmake DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake)
+  # Do not install .lib even if !TINYGLTF_HEADER_ONLY
+
+  INSTALL ( FILES
+    json.hpp
+    stb_image.h
+    stb_image_write.h
+    tiny_gltf.h
+    ${TINYGLTF_EXTRA_SOUECES}
+    DESTINATION
+    include
+    )
+
+endif(TINYGLTF_INSTALL)

README.md

@@ -2,20 +2,27 @@
 
 `TinyGLTF` is a header only C++11 glTF 2.0 https://github.com/KhronosGroup/glTF library.
 
-`TinyGLTF` uses Niels Lohmann's json library(https://github.com/nlohmann/json), so now it requires C++11 compiler.
+`TinyGLTF` uses Niels Lohmann's json library (https://github.com/nlohmann/json), so now it requires C++11 compiler.
-If you are looking for old, C++03 version, please use `devel-picojson` branch(but not maintained anymore).
+(Also, you can use RadpidJSON as an JSON backend)
+If you are looking for old, C++03 version, please use `devel-picojson` branch (but not maintained anymore).
 
 ## Status
 
+Currently TinyGLTF is stable and maintenance mode. No drastic changes and feature additions planned.
+
+ - v2.8.0 Add URICallbacks for custom URI handling in Buffer and Image. PR#397
+ - v2.7.0 Change WriteImageDataFunction user callback function signature. PR#393
+ - v2.6.0 Support serializing sparse accessor(Thanks to @fynv).
+ - v2.5.0 Add SetPreserveImageChannels() option to load image data as is.
  - v2.4.0 Experimental RapidJSON support. Experimental C++14 support(C++14 may give better performance)
  - v2.3.0 Modified Material representation according to glTF 2.0 schema(and introduced TextureInfo class)
  - v2.2.0 release(Support loading 16bit PNG. Sparse accessor support)
- - v2.1.0 release(Draco support)
+ - v2.1.0 release(Draco decoding support)
  - v2.0.0 release(22 Aug, 2018)!
 
 ### Branches
 
-* `sajson` : Use sajson to parse JSON. Parsing only but faster compile time(2x reduction compared to json.hpp and RapidJson)
+* `sajson` : Use sajson to parse JSON. Parsing only but faster compile time(2x reduction compared to json.hpp and RapidJson), but not well maintained.
 
 ## Builds
 
@@ -27,6 +34,8 @@ If you are looking for old, C++03 version, please use `devel-picojson` branch(bu
 
 ## Features
 
+Probably mostly feature-complete. Last missing feature is Draco encoding: https://github.com/syoyo/tinygltf/issues/207
+
 * Written in portable C++. C++-11 with STL dependency only.
   * [x] macOS + clang(LLVM)
   * [x] iOS + clang
@@ -77,6 +86,13 @@ In extension(`ExtensionMap`), JSON number value is parsed as int or float(number
 * [glview](examples/glview) : Simple glTF geometry viewer.
 * [validator](examples/validator) : Simple glTF validator with JSON schema.
 * [basic](examples/basic) : Basic glTF viewer with texturing support.
+* [build-gltf](examples/build-gltf) : Build simple glTF scene from a scratch.
+
+### WASI/WASM build
+
+Users who want to run TinyGLTF securely and safely(e.g. need to handle malcious glTF file to serve online glTF conver),
+I recommend to build TinyGLTF for WASM target.
+WASI build example is located in [wasm](wasm) .
 
 ## Projects using TinyGLTF
 
@@ -90,11 +106,14 @@ In extension(`ExtensionMap`), JSON number value is parsed as int or float(number
 * [GlslViewer](https://github.com/patriciogonzalezvivo/glslViewer) - live GLSL coding for MacOS and Linux
 * [Vulkan-Samples](https://github.com/KhronosGroup/Vulkan-Samples) - The Vulkan Samples is collection of resources to help you develop optimized Vulkan applications.
 * [TDME2](https://github.com/andreasdr/tdme2) - TDME2 - ThreeDeeMiniEngine2 is a lightweight 3D engine including tools suited for 3D game development using C++11
+* [SanityEngine](https://github.com/DethRaid/SanityEngine) - A C++/D3D12 renderer focused on the personal and professional development of its developer
+* [Open3D](http://www.open3d.org/) - A Modern Library for 3D Data Processing
+* [Supernova Engine](https://github.com/supernovaengine/supernova) - Game engine for 2D and 3D projects with Lua or C++ in data oriented design.
 * Your projects here! (Please send PR)
 
 ## TODOs
 
-* [ ] Write C++ code generator which emits C++ code from JSON schema for robust parsing.
+* [ ] Robust URI decoding/encoding. https://github.com/syoyo/tinygltf/issues/369
 * [ ] Mesh Compression/decompression(Open3DGC, etc)
   * [x] Load Draco compressed mesh
   * [ ] Save Draco compressed mesh
@@ -105,6 +124,10 @@ In extension(`ExtensionMap`), JSON number value is parsed as int or float(number
 * [ ] 16bit PNG support in Serialization
 * [ ] Write example and tests for `animation` and `skin`
 
+### Optional
+
+* [ ] Write C++ code generator which emits C++ code from JSON schema for robust parsing?
+
 ## Licenses
 
 TinyGLTF is licensed under MIT license.
@@ -168,12 +191,28 @@ if (!ret) {
 * `TINYGLTF_ANDROID_LOAD_FROM_ASSETS`: Load all files from packaged app assets instead of the regular file system. **Note:** You must pass a valid asset manager from your android app to `tinygltf::asset_manager` beforehand.
 * `TINYGLTF_ENABLE_DRACO`: Enable Draco compression. User must provide include path and link correspnding libraries in your project file.
 * `TINYGLTF_NO_INCLUDE_JSON `: Disable including `json.hpp` from within `tiny_gltf.h` because it has been already included before or you want to include it using custom path before including `tiny_gltf.h`.
+* `TINYGLTF_NO_INCLUDE_RAPIDJSON `: Disable including RapidJson's header files from within `tiny_gltf.h` because it has been already included before or you want to include it using custom path before including `tiny_gltf.h`.
 * `TINYGLTF_NO_INCLUDE_STB_IMAGE `: Disable including `stb_image.h` from within `tiny_gltf.h` because it has been already included before or you want to include it using custom path before including `tiny_gltf.h`.
 * `TINYGLTF_NO_INCLUDE_STB_IMAGE_WRITE `: Disable including `stb_image_write.h` from within `tiny_gltf.h` because it has been already included before or you want to include it using custom path before including `tiny_gltf.h`.
-* `TINYGLTF_USE_RAPIDJSON` : Use RapidJSON as a JSON parser/serializer. RapidJSON files are not included in TinyGLTF repo. Please set an include path to RapidJSON if you enable this featrure.
+* `TINYGLTF_USE_RAPIDJSON` : Use RapidJSON as a JSON parser/serializer. RapidJSON files are not included in TinyGLTF repo. Please set an include path to RapidJSON if you enable this feature.
 * `TINYGLTF_USE_CPP14` : Use C++14 feature(requires C++14 compiler). This may give better performance than C++11.
 
 
+## CMake options
+
+You can add tinygltf using `add_subdirectory` feature.
+If you add tinygltf to your project using `add_subdirectory`, it would be better to set `TINYGLTF_HEADER_ONLY` on(just add an include path to tinygltf) and `TINYGLTF_INSTALL` off(Which does not install tinygltf files).
+
+```
+// Your project's CMakeLists.txt
+...
+
+set(TINYGLTF_HEADER_ONLY ON CACHE INTERNAL "" FORCE)
+set(TINYGLTF_INSTALL OFF CACHE INTERNAL "" FORCE)
+add_subdirectory(/path/to/tinygltf)
+```
+
+
 ### Saving gltTF 2.0 model
 
 * Buffers.
@@ -193,7 +232,7 @@ if (!ret) {
 
 #### Setup
 
-Python 2.6 or 2.7 required.
+Python required.
 Git clone https://github.com/KhronosGroup/glTF-Sample-Models to your local dir.
 
 #### Run parsing test

cmake/TinyGLTFConfig.cmake

@@ -1,15 +0,0 @@
-# -*- cmake -*-
-# - Find TinyGLTF
-
-# TinyGLTF_INCLUDE_DIR      TinyGLTF's include directory
-
-
-FIND_PACKAGE ( PackageHandleStandardArgs )
-
-SET ( TinyGLTF_INCLUDE_DIR "${TinyGLTF_DIR}/../include" CACHE STRING "TinyGLTF include directory")
-
-FIND_FILE ( TinyGLTF_HEADER tiny_gltf.h PATHS ${TinyGLTF_INCLUDE_DIR} )
-
-IF (NOT TinyGLTF_HEADER)
-  MESSAGE ( FATAL_ERROR "Unable to find tiny_gltf.h, TinyGLTF_INCLUDE_DIR = ${TinyGLTF_INCLUDE_DIR}")
-ENDIF ()

cmake/TinyGLTFConfig.cmake.in

@@ -0,0 +1,3 @@
+@PACKAGE_INIT@
+
+include(${CMAKE_CURRENT_LIST_DIR}/TinyGLTFTargets.cmake)

examples/basic/main.cpp

@@ -39,8 +39,8 @@ bool loadModel(tinygltf::Model &model, const char *filename) {
   return res;
 }
 
-std::map<int, GLuint> bindMesh(std::map<int, GLuint> vbos,
+void bindMesh(std::map<int, GLuint>& vbos,
-                               tinygltf::Model &model, tinygltf::Mesh &mesh) {
+              tinygltf::Model &model, tinygltf::Mesh &mesh) {
   for (size_t i = 0; i < model.bufferViews.size(); ++i) {
     const tinygltf::BufferView &bufferView = model.bufferViews[i];
     if (bufferView.target == 0) {  // TODO impl drawarrays
@@ -144,12 +144,10 @@ std::map<int, GLuint> bindMesh(std::map<int, GLuint> vbos,
       }
     }
   }
-
-  return vbos;
 }
 
 // bind models
-void bindModelNodes(std::map<int, GLuint> vbos, tinygltf::Model &model,
+void bindModelNodes(std::map<int, GLuint>& vbos, tinygltf::Model &model,
                     tinygltf::Node &node) {
   if ((node.mesh >= 0) && (node.mesh < model.meshes.size())) {
     bindMesh(vbos, model, model.meshes[node.mesh]);
@@ -160,7 +158,8 @@ void bindModelNodes(std::map<int, GLuint> vbos, tinygltf::Model &model,
     bindModelNodes(vbos, model, model.nodes[node.children[i]]);
   }
 }
-GLuint bindModel(tinygltf::Model &model) {
+
+std::pair<GLuint, std::map<int, GLuint>> bindModel(tinygltf::Model &model) {
   std::map<int, GLuint> vbos;
   GLuint vao;
   glGenVertexArrays(1, &vao);
@@ -173,19 +172,29 @@ GLuint bindModel(tinygltf::Model &model) {
   }
 
   glBindVertexArray(0);
-  // cleanup vbos
+  // cleanup vbos but do not delete index buffers yet
-  for (size_t i = 0; i < vbos.size(); ++i) {
+  for (auto it = vbos.cbegin(); it != vbos.cend();) {
-    glDeleteBuffers(1, &vbos[i]);
+    tinygltf::BufferView bufferView = model.bufferViews[it->first];
+    if (bufferView.target != GL_ELEMENT_ARRAY_BUFFER) {
+      glDeleteBuffers(1, &vbos[it->first]);
+      vbos.erase(it++);
+    }
+    else {
+      ++it;
+    }
   }
 
-  return vao;
+  return {vao, vbos};
 }
 
-void drawMesh(tinygltf::Model &model, tinygltf::Mesh &mesh) {
+void drawMesh(const std::map<int, GLuint>& vbos,
+              tinygltf::Model &model, tinygltf::Mesh &mesh) {
   for (size_t i = 0; i < mesh.primitives.size(); ++i) {
     tinygltf::Primitive primitive = mesh.primitives[i];
     tinygltf::Accessor indexAccessor = model.accessors[primitive.indices];
 
+    glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, vbos.at(indexAccessor.bufferView));
+
     glDrawElements(primitive.mode, indexAccessor.count,
                    indexAccessor.componentType,
                    BUFFER_OFFSET(indexAccessor.byteOffset));
@@ -193,20 +202,22 @@ void drawMesh(tinygltf::Model &model, tinygltf::Mesh &mesh) {
 }
 
 // recursively draw node and children nodes of model
-void drawModelNodes(tinygltf::Model &model, tinygltf::Node &node) {
+void drawModelNodes(const std::pair<GLuint, std::map<int, GLuint>>& vaoAndEbos,
+                    tinygltf::Model &model, tinygltf::Node &node) {
   if ((node.mesh >= 0) && (node.mesh < model.meshes.size())) {
-    drawMesh(model, model.meshes[node.mesh]);
+    drawMesh(vaoAndEbos.second, model, model.meshes[node.mesh]);
   }
   for (size_t i = 0; i < node.children.size(); i++) {
-    drawModelNodes(model, model.nodes[node.children[i]]);
+    drawModelNodes(vaoAndEbos, model, model.nodes[node.children[i]]);
   }
 }
-void drawModel(GLuint vao, tinygltf::Model &model) {
+void drawModel(const std::pair<GLuint, std::map<int, GLuint>>& vaoAndEbos,
-  glBindVertexArray(vao);
+               tinygltf::Model &model) {
+  glBindVertexArray(vaoAndEbos.first);
 
   const tinygltf::Scene &scene = model.scenes[model.defaultScene];
   for (size_t i = 0; i < scene.nodes.size(); ++i) {
-    drawModelNodes(model, model.nodes[scene.nodes[i]]);
+    drawModelNodes(vaoAndEbos, model, model.nodes[scene.nodes[i]]);
   }
 
   glBindVertexArray(0);
@@ -282,7 +293,7 @@ void displayLoop(Window &window, const std::string &filename) {
   tinygltf::Model model;
   if (!loadModel(model, filename.c_str())) return;
 
-  GLuint vao = bindModel(model);
+  std::pair<GLuint, std::map<int, GLuint>> vaoAndEbos = bindModel(model);
   // dbgModel(model); return;
 
   // Model matrix : an identity matrix (model will be at the origin)
@@ -317,10 +328,12 @@ void displayLoop(Window &window, const std::string &filename) {
     glUniform3fv(sun_position_u, 1, &sun_position[0]);
     glUniform3fv(sun_color_u, 1, &sun_color[0]);
 
-    drawModel(vao, model);
+    drawModel(vaoAndEbos, model);
     glfwSwapBuffers(window.window);
     glfwPollEvents();
   }
+
+  glDeleteVertexArrays(1, &vaoAndEbos.first);
 }
 
 static void error_callback(int error, const char *description) {

examples/build-gltf/Makefile

@@ -0,0 +1,2 @@
+all:
+	$(CXX) -o create_triangle_gltf -I../../ create_triangle_gltf.cpp

examples/build-gltf/create_triangle_gltf.cpp

@@ -0,0 +1,121 @@
+// An example of how to generate a gltf file from scratch. This example
+// was translated from the pygltlib documentation in the pypi project page,
+// which in turn is based on the Khronos Sample Models at:
+//
+// https://github.com/KhronosGroup/glTF-Sample-Models
+//
+// This example is released under the MIT license. 
+//
+// 2021-02-25 Thu
+// Dov Grobgeld <dov.grobgeld@gmail.com>
+
+
+// Define these only in *one* .cc file.
+#define TINYGLTF_IMPLEMENTATION
+#define STB_IMAGE_IMPLEMENTATION
+#define STB_IMAGE_WRITE_IMPLEMENTATION
+
+// #define TINYGLTF_NOEXCEPTION // optional. disable exception handling.
+#include "tiny_gltf.h"
+
+int main(int argc, char **argv)
+{
+  // Create a model with a single mesh and save it as a gltf file
+  tinygltf::Model m;
+  tinygltf::Scene scene;
+  tinygltf::Mesh mesh;
+  tinygltf::Primitive primitive;
+  tinygltf::Node node;
+  tinygltf::Buffer buffer;
+  tinygltf::BufferView bufferView1;
+  tinygltf::BufferView bufferView2;
+  tinygltf::Accessor accessor1;
+  tinygltf::Accessor accessor2;
+  tinygltf::Asset asset;
+
+  // This is the raw data buffer. 
+  buffer.data = {
+    // 6 bytes of indices and two bytes of padding
+    0x00,0x00,0x01,0x00,0x02,0x00,0x00,0x00,
+    // 36 bytes of floating point numbers
+    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+    0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x3f,
+    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+    0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x3f,
+    0x00,0x00,0x00,0x00};
+
+  // "The indices of the vertices (ELEMENT_ARRAY_BUFFER) take up 6 bytes in the
+  // start of the buffer.
+  bufferView1.buffer = 0;
+  bufferView1.byteOffset=0;
+  bufferView1.byteLength=6;
+  bufferView1.target = TINYGLTF_TARGET_ELEMENT_ARRAY_BUFFER;
+
+  // The vertices take up 36 bytes (3 vertices * 3 floating points * 4 bytes)
+  // at position 8 in the buffer and are of type ARRAY_BUFFER
+  bufferView2.buffer = 0;
+  bufferView2.byteOffset=8;
+  bufferView2.byteLength=36;
+  bufferView2.target = TINYGLTF_TARGET_ARRAY_BUFFER;
+
+  // Describe the layout of bufferView1, the indices of the vertices
+  accessor1.bufferView = 0;
+  accessor1.byteOffset = 0;
+  accessor1.componentType = TINYGLTF_COMPONENT_TYPE_UNSIGNED_SHORT;
+  accessor1.count = 3;
+  accessor1.type = TINYGLTF_TYPE_SCALAR;
+  accessor1.maxValues.push_back(2);
+  accessor1.minValues.push_back(0);
+
+  // Describe the layout of bufferView2, the vertices themself
+  accessor2.bufferView = 1;
+  accessor2.byteOffset = 0;
+  accessor2.componentType = TINYGLTF_COMPONENT_TYPE_FLOAT;
+  accessor2.count = 3;
+  accessor2.type = TINYGLTF_TYPE_VEC3;
+  accessor2.maxValues = {1.0, 1.0, 0.0};
+  accessor2.minValues = {0.0, 0.0, 0.0};
+
+  // Build the mesh primitive and add it to the mesh
+  primitive.indices = 0;                 // The index of the accessor for the vertex indices
+  primitive.attributes["POSITION"] = 1;  // The index of the accessor for positions
+  primitive.material = 0;
+  primitive.mode = TINYGLTF_MODE_TRIANGLES;
+  mesh.primitives.push_back(primitive);
+
+  // Other tie ups
+  node.mesh = 0;
+  scene.nodes.push_back(0); // Default scene
+
+  // Define the asset. The version is required
+  asset.version = "2.0";
+  asset.generator = "tinygltf";
+
+  // Now all that remains is to tie back all the loose objects into the
+  // our single model.
+  m.scenes.push_back(scene);
+  m.meshes.push_back(mesh);
+  m.nodes.push_back(node);
+  m.buffers.push_back(buffer);
+  m.bufferViews.push_back(bufferView1);
+  m.bufferViews.push_back(bufferView2);
+  m.accessors.push_back(accessor1);
+  m.accessors.push_back(accessor2);
+  m.asset = asset;
+
+  // Create a simple material
+  tinygltf::Material mat;
+  mat.pbrMetallicRoughness.baseColorFactor = {1.0f, 0.9f, 0.9f, 1.0f};  
+  mat.doubleSided = true;
+  m.materials.push_back(mat);
+
+  // Save it to a file
+  tinygltf::TinyGLTF gltf;
+  gltf.WriteGltfSceneToFile(&m, "triangle.gltf",
+                           true, // embedImages
+                           true, // embedBuffers
+                           true, // pretty print
+                           false); // write binary
+  
+  exit(0);
+}

examples/dxview/src/Viewer.cc

@@ -610,7 +610,7 @@ void Viewer::buildSamplerDescs() {
 
     samplerDesc.AddressU = toTextureAddressMode(glTFSampler.wrapS);
     samplerDesc.AddressV = toTextureAddressMode(glTFSampler.wrapT);
-    samplerDesc.AddressW = toTextureAddressMode(glTFSampler.wrapR);
+    samplerDesc.AddressW = D3D12_TEXTURE_ADDRESS_MODE_WRAP;
     samplerDesc.MaxLOD = 256;
 
     samplerDescs_.push_back(samplerDesc);

examples/glview/CMakeLists.txt

@@ -51,7 +51,7 @@ add_executable(glview
 target_link_libraries ( glview
   ${DRACO_LIBRARY}
   ${GLFW3_UNIX_LINK_LIBRARIES}
-  ${GLEW_LIBRARY}
+  ${GLEW_LIBRARIES}
   ${GLFW3_glfw_LIBRARY}
   ${OPENGL_gl_LIBRARY}
   ${OPENGL_glu_LIBRARY}

examples/glview/glview.cc

@@ -771,6 +771,30 @@ static void DrawCurves(tinygltf::Scene &scene, const tinygltf::Mesh &mesh) {
 }
 #endif
 
+static void QuatToAngleAxis(const std::vector<double> quaternion,
+			    double &outAngleDegrees,
+			    double *axis) {
+  double qx = quaternion[0];
+  double qy = quaternion[1];
+  double qz = quaternion[2];
+  double qw = quaternion[3];
+  
+  double angleRadians = 2 * acos(qw);
+  if (angleRadians == 0.0) {
+    outAngleDegrees = 0.0;
+    axis[0] = 0.0;
+    axis[1] = 0.0;
+    axis[2] = 1.0;
+    return;
+  }
+
+  double denom = sqrt(1-qw*qw);
+  outAngleDegrees = angleRadians * 180.0 / M_PI;
+  axis[0] = qx / denom;
+  axis[1] = qy / denom;
+  axis[2] = qz / denom;
+}
+
 // Hierarchically draw nodes
 static void DrawNode(tinygltf::Model &model, const tinygltf::Node &node) {
   // Apply xform
@@ -781,19 +805,23 @@ static void DrawNode(tinygltf::Model &model, const tinygltf::Node &node) {
     glMultMatrixd(node.matrix.data());
   } else {
     // Assume Trans x Rotate x Scale order
-    if (node.scale.size() == 3) {
-      glScaled(node.scale[0], node.scale[1], node.scale[2]);
-    }
-
-    if (node.rotation.size() == 4) {
-      glRotated(node.rotation[0], node.rotation[1], node.rotation[2],
-                node.rotation[3]);
-    }
-
     if (node.translation.size() == 3) {
       glTranslated(node.translation[0], node.translation[1],
                    node.translation[2]);
     }    
+
+    if (node.rotation.size() == 4) {
+      double angleDegrees;
+      double axis[3];
+
+      QuatToAngleAxis(node.rotation, angleDegrees, axis);
+      
+      glRotated(angleDegrees, axis[0], axis[1], axis[2]);
+    }
+
+    if (node.scale.size() == 3) {
+      glScaled(node.scale[0], node.scale[1], node.scale[2]);
+    }
   }
 
   // std::cout << "node " << node.name << ", Meshes " << node.meshes.size() <<

loader_example.cc

@@ -524,7 +524,7 @@ static void Dump(const tinygltf::Model &model) {
                 << std::endl;
 
       std::cout << Indent(1) << "channels : [ " << std::endl;
-      for (size_t j = 0; i < animation.channels.size(); i++) {
+      for (size_t j = 0; j < animation.channels.size(); j++) {
         std::cout << Indent(2)
                   << "sampler     : " << animation.channels[j].sampler
                   << std::endl;

stb_image_write.h

@@ -1,4 +1,4 @@
-/* stb_image_write - v1.11 - public domain - http://nothings.org/stb/stb_image_write.h
+/* stb_image_write - v1.16 - public domain - http://nothings.org/stb
    writes out PNG/BMP/TGA/JPEG/HDR images to C stdio - Sean Barrett 2010-2015
                                      no warranty implied; use at your own risk
 
@@ -10,11 +10,6 @@
 
    Will probably not work correctly with strict-aliasing optimizations.
 
-   If using a modern Microsoft Compiler, non-safe versions of CRT calls may cause 
-   compilation warnings or even errors. To avoid this, also before #including,
-
-       #define STBI_MSC_SECURE_CRT
-
 ABOUT:
 
    This header file is a library for writing images to C stdio or a callback.
@@ -145,6 +140,7 @@ CREDITS:
       Ivan Tikhonov
       github:ignotion
       Adam Schackart
+      Andrew Kensler
 
 LICENSE
 
@@ -171,9 +167,9 @@ LICENSE
 #endif
 
 #ifndef STB_IMAGE_WRITE_STATIC  // C++ forbids static forward declarations
-extern int stbi_write_tga_with_rle;
+STBIWDEF int stbi_write_tga_with_rle;
-extern int stbi_write_png_compression_level;
+STBIWDEF int stbi_write_png_compression_level;
-extern int stbi_write_force_png_filter;
+STBIWDEF int stbi_write_force_png_filter;
 #endif
 
 #ifndef STBI_WRITE_NO_STDIO
@@ -183,7 +179,7 @@ STBIWDEF int stbi_write_tga(char const *filename, int w, int h, int comp, const
 STBIWDEF int stbi_write_hdr(char const *filename, int w, int h, int comp, const float *data);
 STBIWDEF int stbi_write_jpg(char const *filename, int x, int y, int comp, const void  *data, int quality);
 
-#ifdef STBI_WINDOWS_UTF8
+#ifdef STBIW_WINDOWS_UTF8
 STBIWDEF int stbiw_convert_wchar_to_utf8(char *buffer, size_t bufferlen, const wchar_t* input);
 #endif
 #endif
@@ -252,17 +248,17 @@ STBIWDEF void stbi_flip_vertically_on_write(int flip_boolean);
 #define STBIW_UCHAR(x) (unsigned char) ((x) & 0xff)
 
 #ifdef STB_IMAGE_WRITE_STATIC
-static int stbi__flip_vertically_on_write=0;
 static int stbi_write_png_compression_level = 8;
 static int stbi_write_tga_with_rle = 1;
 static int stbi_write_force_png_filter = -1;
 #else
 int stbi_write_png_compression_level = 8;
-int stbi__flip_vertically_on_write=0;
 int stbi_write_tga_with_rle = 1;
 int stbi_write_force_png_filter = -1;
 #endif
 
+static int stbi__flip_vertically_on_write = 0;
+
 STBIWDEF void stbi_flip_vertically_on_write(int flag)
 {
    stbi__flip_vertically_on_write = flag;
@@ -272,6 +268,8 @@ typedef struct
 {
    stbi_write_func *func;
    void *context;
+   unsigned char buffer[64];
+   int buf_used;
 } stbi__write_context;
 
 // initialize a callback-based context
@@ -288,7 +286,7 @@ static void stbi__stdio_write(void *context, void *data, int size)
    fwrite(data,1,size,(FILE*) context);
 }
 
-#if defined(_MSC_VER) && defined(STBI_WINDOWS_UTF8)
+#if defined(_WIN32) && defined(STBIW_WINDOWS_UTF8)
 #ifdef __cplusplus
 #define STBIW_EXTERN extern "C"
 #else
@@ -299,25 +297,25 @@ STBIW_EXTERN __declspec(dllimport) int __stdcall WideCharToMultiByte(unsigned in
 
 STBIWDEF int stbiw_convert_wchar_to_utf8(char *buffer, size_t bufferlen, const wchar_t* input)
 {
-	return WideCharToMultiByte(65001 /* UTF8 */, 0, input, -1, buffer, bufferlen, NULL, NULL);
+   return WideCharToMultiByte(65001 /* UTF8 */, 0, input, -1, buffer, (int) bufferlen, NULL, NULL);
 }
 #endif
 
 static FILE *stbiw__fopen(char const *filename, char const *mode)
 {
    FILE *f;
-#if defined(_MSC_VER) && defined(STBI_WINDOWS_UTF8)
+#if defined(_WIN32) && defined(STBIW_WINDOWS_UTF8)
    wchar_t wMode[64];
    wchar_t wFilename[1024];
-	if (0 == MultiByteToWideChar(65001 /* UTF8 */, 0, filename, -1, wFilename, sizeof(wFilename)))
+   if (0 == MultiByteToWideChar(65001 /* UTF8 */, 0, filename, -1, wFilename, sizeof(wFilename)/sizeof(*wFilename)))
       return 0;
 
-	if (0 == MultiByteToWideChar(65001 /* UTF8 */, 0, mode, -1, wMode, sizeof(wMode)))
+   if (0 == MultiByteToWideChar(65001 /* UTF8 */, 0, mode, -1, wMode, sizeof(wMode)/sizeof(*wMode)))
       return 0;
 
-#if _MSC_VER >= 1400
+#if defined(_MSC_VER) && _MSC_VER >= 1400
-	if (0 != _wfopen_s(&f, wFilename, wMode))
+   if (0 != _wfopen_s(&f, wFilename, wMode))
-		f = 0;
+      f = 0;
 #else
    f = _wfopen(wFilename, wMode);
 #endif
@@ -385,16 +383,36 @@ static void stbiw__writef(stbi__write_context *s, const char *fmt, ...)
    va_end(v);
 }
 
+static void stbiw__write_flush(stbi__write_context *s)
+{
+   if (s->buf_used) {
+      s->func(s->context, &s->buffer, s->buf_used);
+      s->buf_used = 0;
+   }
+}
+
 static void stbiw__putc(stbi__write_context *s, unsigned char c)
 {
    s->func(s->context, &c, 1);
 }
 
+static void stbiw__write1(stbi__write_context *s, unsigned char a)
+{
+   if ((size_t)s->buf_used + 1 > sizeof(s->buffer))
+      stbiw__write_flush(s);
+   s->buffer[s->buf_used++] = a;
+}
+
 static void stbiw__write3(stbi__write_context *s, unsigned char a, unsigned char b, unsigned char c)
 {
-   unsigned char arr[3];
+   int n;
-   arr[0] = a, arr[1] = b, arr[2] = c;
+   if ((size_t)s->buf_used + 3 > sizeof(s->buffer))
-   s->func(s->context, arr, 3);
+      stbiw__write_flush(s);
+   n = s->buf_used;
+   s->buf_used = n+3;
+   s->buffer[n+0] = a;
+   s->buffer[n+1] = b;
+   s->buffer[n+2] = c;
 }
 
 static void stbiw__write_pixel(stbi__write_context *s, int rgb_dir, int comp, int write_alpha, int expand_mono, unsigned char *d)
@@ -403,7 +421,7 @@ static void stbiw__write_pixel(stbi__write_context *s, int rgb_dir, int comp, in
    int k;
 
    if (write_alpha < 0)
-      s->func(s->context, &d[comp - 1], 1);
+      stbiw__write1(s, d[comp - 1]);
 
    switch (comp) {
       case 2: // 2 pixels = mono + alpha, alpha is written separately, so same as 1-channel case
@@ -411,7 +429,7 @@ static void stbiw__write_pixel(stbi__write_context *s, int rgb_dir, int comp, in
          if (expand_mono)
             stbiw__write3(s, d[0], d[0], d[0]); // monochrome bmp
          else
-            s->func(s->context, d, 1);  // monochrome TGA
+            stbiw__write1(s, d[0]);  // monochrome TGA
          break;
       case 4:
          if (!write_alpha) {
@@ -427,7 +445,7 @@ static void stbiw__write_pixel(stbi__write_context *s, int rgb_dir, int comp, in
          break;
    }
    if (write_alpha > 0)
-      s->func(s->context, &d[comp - 1], 1);
+      stbiw__write1(s, d[comp - 1]);
 }
 
 static void stbiw__write_pixels(stbi__write_context *s, int rgb_dir, int vdir, int x, int y, int comp, void *data, int write_alpha, int scanline_pad, int expand_mono)
@@ -441,16 +459,18 @@ static void stbiw__write_pixels(stbi__write_context *s, int rgb_dir, int vdir, i
    if (stbi__flip_vertically_on_write)
       vdir *= -1;
 
-   if (vdir < 0)
+   if (vdir < 0) {
-      j_end = -1, j = y-1;
+      j_end = -1; j = y-1;
-   else
+   } else {
-      j_end =  y, j = 0;
+      j_end =  y; j = 0;
+   }
 
    for (; j != j_end; j += vdir) {
       for (i=0; i < x; ++i) {
          unsigned char *d = (unsigned char *) data + (j*x+i)*comp;
          stbiw__write_pixel(s, rgb_dir, comp, write_alpha, expand_mono, d);
       }
+      stbiw__write_flush(s);
       s->func(s->context, &zero, scanline_pad);
    }
 }
@@ -471,16 +491,27 @@ static int stbiw__outfile(stbi__write_context *s, int rgb_dir, int vdir, int x,
 
 static int stbi_write_bmp_core(stbi__write_context *s, int x, int y, int comp, const void *data)
 {
-   int pad = (-x*3) & 3;
+   if (comp != 4) {
-   return stbiw__outfile(s,-1,-1,x,y,comp,1,(void *) data,0,pad,
+      // write RGB bitmap
-           "11 4 22 4" "4 44 22 444444",
+      int pad = (-x*3) & 3;
-           'B', 'M', 14+40+(x*3+pad)*y, 0,0, 14+40,  // file header
+      return stbiw__outfile(s,-1,-1,x,y,comp,1,(void *) data,0,pad,
-            40, x,y, 1,24, 0,0,0,0,0,0);             // bitmap header
+              "11 4 22 4" "4 44 22 444444",
+              'B', 'M', 14+40+(x*3+pad)*y, 0,0, 14+40,  // file header
+               40, x,y, 1,24, 0,0,0,0,0,0);             // bitmap header
+   } else {
+      // RGBA bitmaps need a v4 header
+      // use BI_BITFIELDS mode with 32bpp and alpha mask
+      // (straight BI_RGB with alpha mask doesn't work in most readers)
+      return stbiw__outfile(s,-1,-1,x,y,comp,1,(void *)data,1,0,
+         "11 4 22 4" "4 44 22 444444 4444 4 444 444 444 444",
+         'B', 'M', 14+108+x*y*4, 0, 0, 14+108, // file header
+         108, x,y, 1,32, 3,0,0,0,0,0, 0xff0000,0xff00,0xff,0xff000000u, 0, 0,0,0, 0,0,0, 0,0,0, 0,0,0); // bitmap V4 header
+   }
 }
 
 STBIWDEF int stbi_write_bmp_to_func(stbi_write_func *func, void *context, int x, int y, int comp, const void *data)
 {
-   stbi__write_context s;
+   stbi__write_context s = { 0 };
    stbi__start_write_callbacks(&s, func, context);
    return stbi_write_bmp_core(&s, x, y, comp, data);
 }
@@ -488,7 +519,7 @@ STBIWDEF int stbi_write_bmp_to_func(stbi_write_func *func, void *context, int x,
 #ifndef STBI_WRITE_NO_STDIO
 STBIWDEF int stbi_write_bmp(char const *filename, int x, int y, int comp, const void *data)
 {
-   stbi__write_context s;
+   stbi__write_context s = { 0 };
    if (stbi__start_write_file(&s,filename)) {
       int r = stbi_write_bmp_core(&s, x, y, comp, data);
       stbi__end_write_file(&s);
@@ -561,24 +592,25 @@ static int stbi_write_tga_core(stbi__write_context *s, int x, int y, int comp, v
 
             if (diff) {
                unsigned char header = STBIW_UCHAR(len - 1);
-               s->func(s->context, &header, 1);
+               stbiw__write1(s, header);
                for (k = 0; k < len; ++k) {
                   stbiw__write_pixel(s, -1, comp, has_alpha, 0, begin + k * comp);
                }
             } else {
                unsigned char header = STBIW_UCHAR(len - 129);
-               s->func(s->context, &header, 1);
+               stbiw__write1(s, header);
                stbiw__write_pixel(s, -1, comp, has_alpha, 0, begin);
             }
          }
       }
+      stbiw__write_flush(s);
    }
    return 1;
 }
 
 STBIWDEF int stbi_write_tga_to_func(stbi_write_func *func, void *context, int x, int y, int comp, const void *data)
 {
-   stbi__write_context s;
+   stbi__write_context s = { 0 };
    stbi__start_write_callbacks(&s, func, context);
    return stbi_write_tga_core(&s, x, y, comp, (void *) data);
 }
@@ -586,7 +618,7 @@ STBIWDEF int stbi_write_tga_to_func(stbi_write_func *func, void *context, int x,
 #ifndef STBI_WRITE_NO_STDIO
 STBIWDEF int stbi_write_tga(char const *filename, int x, int y, int comp, const void *data)
 {
-   stbi__write_context s;
+   stbi__write_context s = { 0 };
    if (stbi__start_write_file(&s,filename)) {
       int r = stbi_write_tga_core(&s, x, y, comp, (void *) data);
       stbi__end_write_file(&s);
@@ -602,6 +634,8 @@ STBIWDEF int stbi_write_tga(char const *filename, int x, int y, int comp, const
 
 #define stbiw__max(a, b)  ((a) > (b) ? (a) : (b))
 
+#ifndef STBI_WRITE_NO_STDIO
+
 static void stbiw__linear_to_rgbe(unsigned char *rgbe, float *linear)
 {
    int exponent;
@@ -736,8 +770,8 @@ static int stbi_write_hdr_core(stbi__write_context *s, int x, int y, int comp, f
       char header[] = "#?RADIANCE\n# Written by stb_image_write.h\nFORMAT=32-bit_rle_rgbe\n";
       s->func(s->context, header, sizeof(header)-1);
 
-#ifdef STBI_MSC_SECURE_CRT
+#ifdef __STDC_LIB_EXT1__
-      len = sprintf_s(buffer, "EXPOSURE=          1.0000000000000\n\n-Y %d +X %d\n", y, x);
+      len = sprintf_s(buffer, sizeof(buffer), "EXPOSURE=          1.0000000000000\n\n-Y %d +X %d\n", y, x);
 #else
       len = sprintf(buffer, "EXPOSURE=          1.0000000000000\n\n-Y %d +X %d\n", y, x);
 #endif
@@ -752,15 +786,14 @@ static int stbi_write_hdr_core(stbi__write_context *s, int x, int y, int comp, f
 
 STBIWDEF int stbi_write_hdr_to_func(stbi_write_func *func, void *context, int x, int y, int comp, const float *data)
 {
-   stbi__write_context s;
+   stbi__write_context s = { 0 };
    stbi__start_write_callbacks(&s, func, context);
    return stbi_write_hdr_core(&s, x, y, comp, (float *) data);
 }
 
-#ifndef STBI_WRITE_NO_STDIO
 STBIWDEF int stbi_write_hdr(char const *filename, int x, int y, int comp, const float *data)
 {
-   stbi__write_context s;
+   stbi__write_context s = { 0 };
    if (stbi__start_write_file(&s,filename)) {
       int r = stbi_write_hdr_core(&s, x, y, comp, (float *) data);
       stbi__end_write_file(&s);
@@ -778,7 +811,7 @@ STBIWDEF int stbi_write_hdr(char const *filename, int x, int y, int comp, const
 
 #ifndef STBIW_ZLIB_COMPRESS
 // stretchy buffer; stbiw__sbpush() == vector<>::push_back() -- stbiw__sbcount() == vector<>::size()
-#define stbiw__sbraw(a) ((int *) (a) - 2)
+#define stbiw__sbraw(a) ((int *) (void *) (a) - 2)
 #define stbiw__sbm(a)   stbiw__sbraw(a)[0]
 #define stbiw__sbn(a)   stbiw__sbraw(a)[1]
 
@@ -872,7 +905,7 @@ STBIWDEF unsigned char * stbi_zlib_compress(unsigned char *data, int data_len, i
    unsigned int bitbuf=0;
    int i,j, bitcount=0;
    unsigned char *out = NULL;
-   unsigned char ***hash_table = (unsigned char***) STBIW_MALLOC(stbiw__ZHASH * sizeof(char**));
+   unsigned char ***hash_table = (unsigned char***) STBIW_MALLOC(stbiw__ZHASH * sizeof(unsigned char**));
    if (hash_table == NULL)
       return NULL;
    if (quality < 5) quality = 5;
@@ -895,7 +928,7 @@ STBIWDEF unsigned char * stbi_zlib_compress(unsigned char *data, int data_len, i
       for (j=0; j < n; ++j) {
          if (hlist[j]-data > i-32768) { // if entry lies within window
             int d = stbiw__zlib_countm(hlist[j], data+i, data_len-i);
-            if (d >= best) best=d,bestloc=hlist[j];
+            if (d >= best) { best=d; bestloc=hlist[j]; }
          }
       }
       // when hash table entry is too long, delete half the entries
@@ -948,14 +981,31 @@ STBIWDEF unsigned char * stbi_zlib_compress(unsigned char *data, int data_len, i
       (void) stbiw__sbfree(hash_table[i]);
    STBIW_FREE(hash_table);
 
+   // store uncompressed instead if compression was worse
+   if (stbiw__sbn(out) > data_len + 2 + ((data_len+32766)/32767)*5) {
+      stbiw__sbn(out) = 2;  // truncate to DEFLATE 32K window and FLEVEL = 1
+      for (j = 0; j < data_len;) {
+         int blocklen = data_len - j;
+         if (blocklen > 32767) blocklen = 32767;
+         stbiw__sbpush(out, data_len - j == blocklen); // BFINAL = ?, BTYPE = 0 -- no compression
+         stbiw__sbpush(out, STBIW_UCHAR(blocklen)); // LEN
+         stbiw__sbpush(out, STBIW_UCHAR(blocklen >> 8));
+         stbiw__sbpush(out, STBIW_UCHAR(~blocklen)); // NLEN
+         stbiw__sbpush(out, STBIW_UCHAR(~blocklen >> 8));
+         memcpy(out+stbiw__sbn(out), data+j, blocklen);
+         stbiw__sbn(out) += blocklen;
+         j += blocklen;
+      }
+   }
+
    {
       // compute adler32 on input
       unsigned int s1=1, s2=0;
       int blocklen = (int) (data_len % 5552);
       j=0;
       while (j < data_len) {
-         for (i=0; i < blocklen; ++i) s1 += data[j+i], s2 += s1;
+         for (i=0; i < blocklen; ++i) { s1 += data[j+i]; s2 += s1; }
-         s1 %= 65521, s2 %= 65521;
+         s1 %= 65521; s2 %= 65521;
          j += blocklen;
          blocklen = 5552;
       }
@@ -1275,26 +1325,31 @@ static void stbiw__jpg_calcBits(int val, unsigned short bits[2]) {
    bits[0] = val & ((1<<bits[1])-1);
 }
 
-static int stbiw__jpg_processDU(stbi__write_context *s, int *bitBuf, int *bitCnt, float *CDU, float *fdtbl, int DC, const unsigned short HTDC[256][2], const unsigned short HTAC[256][2]) {
+static int stbiw__jpg_processDU(stbi__write_context *s, int *bitBuf, int *bitCnt, float *CDU, int du_stride, float *fdtbl, int DC, const unsigned short HTDC[256][2], const unsigned short HTAC[256][2]) {
    const unsigned short EOB[2] = { HTAC[0x00][0], HTAC[0x00][1] };
    const unsigned short M16zeroes[2] = { HTAC[0xF0][0], HTAC[0xF0][1] };
-   int dataOff, i, diff, end0pos;
+   int dataOff, i, j, n, diff, end0pos, x, y;
    int DU[64];
 
    // DCT rows
-   for(dataOff=0; dataOff<64; dataOff+=8) {
+   for(dataOff=0, n=du_stride*8; dataOff<n; dataOff+=du_stride) {
       stbiw__jpg_DCT(&CDU[dataOff], &CDU[dataOff+1], &CDU[dataOff+2], &CDU[dataOff+3], &CDU[dataOff+4], &CDU[dataOff+5], &CDU[dataOff+6], &CDU[dataOff+7]);
    }
    // DCT columns
    for(dataOff=0; dataOff<8; ++dataOff) {
-      stbiw__jpg_DCT(&CDU[dataOff], &CDU[dataOff+8], &CDU[dataOff+16], &CDU[dataOff+24], &CDU[dataOff+32], &CDU[dataOff+40], &CDU[dataOff+48], &CDU[dataOff+56]);
+      stbiw__jpg_DCT(&CDU[dataOff], &CDU[dataOff+du_stride], &CDU[dataOff+du_stride*2], &CDU[dataOff+du_stride*3], &CDU[dataOff+du_stride*4],
+                     &CDU[dataOff+du_stride*5], &CDU[dataOff+du_stride*6], &CDU[dataOff+du_stride*7]);
    }
    // Quantize/descale/zigzag the coefficients
-   for(i=0; i<64; ++i) {
+   for(y = 0, j=0; y < 8; ++y) {
-      float v = CDU[i]*fdtbl[i];
+      for(x = 0; x < 8; ++x,++j) {
-      // DU[stbiw__jpg_ZigZag[i]] = (int)(v < 0 ? ceilf(v - 0.5f) : floorf(v + 0.5f));
+         float v;
-      // ceilf() and floorf() are C99, not C89, but I /think/ they're not needed here anyway?
+         i = y*du_stride+x;
-      DU[stbiw__jpg_ZigZag[i]] = (int)(v < 0 ? v - 0.5f : v + 0.5f);
+         v = CDU[i]*fdtbl[j];
+         // DU[stbiw__jpg_ZigZag[j]] = (int)(v < 0 ? ceilf(v - 0.5f) : floorf(v + 0.5f));
+         // ceilf() and floorf() are C99, not C89, but I /think/ they're not needed here anyway?
+         DU[stbiw__jpg_ZigZag[j]] = (int)(v < 0 ? v - 0.5f : v + 0.5f);
+      }
    }
 
    // Encode DC
@@ -1412,7 +1467,7 @@ static int stbi_write_jpg_core(stbi__write_context *s, int width, int height, in
    static const float aasf[] = { 1.0f * 2.828427125f, 1.387039845f * 2.828427125f, 1.306562965f * 2.828427125f, 1.175875602f * 2.828427125f,
                                  1.0f * 2.828427125f, 0.785694958f * 2.828427125f, 0.541196100f * 2.828427125f, 0.275899379f * 2.828427125f };
 
-   int row, col, i, k;
+   int row, col, i, k, subsample;
    float fdtbl_Y[64], fdtbl_UV[64];
    unsigned char YTable[64], UVTable[64];
 
@@ -1421,6 +1476,7 @@ static int stbi_write_jpg_core(stbi__write_context *s, int width, int height, in
    }
 
    quality = quality ? quality : 90;
+   subsample = quality <= 90 ? 1 : 0;
    quality = quality < 1 ? 1 : quality > 100 ? 100 : quality;
    quality = quality < 50 ? 5000 / quality : 200 - quality * 2;
 
@@ -1443,7 +1499,7 @@ static int stbi_write_jpg_core(stbi__write_context *s, int width, int height, in
       static const unsigned char head0[] = { 0xFF,0xD8,0xFF,0xE0,0,0x10,'J','F','I','F',0,1,1,0,0,1,0,1,0,0,0xFF,0xDB,0,0x84,0 };
       static const unsigned char head2[] = { 0xFF,0xDA,0,0xC,3,1,0,2,0x11,3,0x11,0,0x3F,0 };
       const unsigned char head1[] = { 0xFF,0xC0,0,0x11,8,(unsigned char)(height>>8),STBIW_UCHAR(height),(unsigned char)(width>>8),STBIW_UCHAR(width),
-                                      3,1,0x11,0,2,0x11,1,3,0x11,1,0xFF,0xC4,0x01,0xA2,0 };
+                                      3,1,(unsigned char)(subsample?0x22:0x11),0,2,0x11,1,3,0x11,1,0xFF,0xC4,0x01,0xA2,0 };
       s->func(s->context, (void*)head0, sizeof(head0));
       s->func(s->context, (void*)YTable, sizeof(YTable));
       stbiw__putc(s, 1);
@@ -1466,36 +1522,74 @@ static int stbi_write_jpg_core(stbi__write_context *s, int width, int height, in
    // Encode 8x8 macroblocks
    {
       static const unsigned short fillBits[] = {0x7F, 7};
-      const unsigned char *imageData = (const unsigned char *)data;
       int DCY=0, DCU=0, DCV=0;
       int bitBuf=0, bitCnt=0;
       // comp == 2 is grey+alpha (alpha is ignored)
       int ofsG = comp > 2 ? 1 : 0, ofsB = comp > 2 ? 2 : 0;
+      const unsigned char *dataR = (const unsigned char *)data;
+      const unsigned char *dataG = dataR + ofsG;
+      const unsigned char *dataB = dataR + ofsB;
       int x, y, pos;
-      for(y = 0; y < height; y += 8) {
+      if(subsample) {
-         for(x = 0; x < width; x += 8) {
+         for(y = 0; y < height; y += 16) {
-            float YDU[64], UDU[64], VDU[64];
+            for(x = 0; x < width; x += 16) {
-            for(row = y, pos = 0; row < y+8; ++row) {
+               float Y[256], U[256], V[256];
-               // row >= height => use last input row
+               for(row = y, pos = 0; row < y+16; ++row) {
-               int clamped_row = (row < height) ? row : height - 1;
+                  // row >= height => use last input row
-               int base_p = (stbi__flip_vertically_on_write ? (height-1-clamped_row) : clamped_row)*width*comp;
+                  int clamped_row = (row < height) ? row : height - 1;
-               for(col = x; col < x+8; ++col, ++pos) {
+                  int base_p = (stbi__flip_vertically_on_write ? (height-1-clamped_row) : clamped_row)*width*comp;
-                  float r, g, b;
+                  for(col = x; col < x+16; ++col, ++pos) {
-                  // if col >= width => use pixel from last input column
+                     // if col >= width => use pixel from last input column
-                  int p = base_p + ((col < width) ? col : (width-1))*comp;
+                     int p = base_p + ((col < width) ? col : (width-1))*comp;
+                     float r = dataR[p], g = dataG[p], b = dataB[p];
+                     Y[pos]= +0.29900f*r + 0.58700f*g + 0.11400f*b - 128;
+                     U[pos]= -0.16874f*r - 0.33126f*g + 0.50000f*b;
+                     V[pos]= +0.50000f*r - 0.41869f*g - 0.08131f*b;
+                  }
+               }
+               DCY = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, Y+0,   16, fdtbl_Y, DCY, YDC_HT, YAC_HT);
+               DCY = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, Y+8,   16, fdtbl_Y, DCY, YDC_HT, YAC_HT);
+               DCY = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, Y+128, 16, fdtbl_Y, DCY, YDC_HT, YAC_HT);
+               DCY = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, Y+136, 16, fdtbl_Y, DCY, YDC_HT, YAC_HT);
 
-                  r = imageData[p+0];
+               // subsample U,V
-                  g = imageData[p+ofsG];
+               {
-                  b = imageData[p+ofsB];
+                  float subU[64], subV[64];
-                  YDU[pos]=+0.29900f*r+0.58700f*g+0.11400f*b-128;
+                  int yy, xx;
-                  UDU[pos]=-0.16874f*r-0.33126f*g+0.50000f*b;
+                  for(yy = 0, pos = 0; yy < 8; ++yy) {
-                  VDU[pos]=+0.50000f*r-0.41869f*g-0.08131f*b;
+                     for(xx = 0; xx < 8; ++xx, ++pos) {
+                        int j = yy*32+xx*2;
+                        subU[pos] = (U[j+0] + U[j+1] + U[j+16] + U[j+17]) * 0.25f;
+                        subV[pos] = (V[j+0] + V[j+1] + V[j+16] + V[j+17]) * 0.25f;
+                     }
+                  }
+                  DCU = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, subU, 8, fdtbl_UV, DCU, UVDC_HT, UVAC_HT);
+                  DCV = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, subV, 8, fdtbl_UV, DCV, UVDC_HT, UVAC_HT);
                }
             }
+         }
+      } else {
+         for(y = 0; y < height; y += 8) {
+            for(x = 0; x < width; x += 8) {
+               float Y[64], U[64], V[64];
+               for(row = y, pos = 0; row < y+8; ++row) {
+                  // row >= height => use last input row
+                  int clamped_row = (row < height) ? row : height - 1;
+                  int base_p = (stbi__flip_vertically_on_write ? (height-1-clamped_row) : clamped_row)*width*comp;
+                  for(col = x; col < x+8; ++col, ++pos) {
+                     // if col >= width => use pixel from last input column
+                     int p = base_p + ((col < width) ? col : (width-1))*comp;
+                     float r = dataR[p], g = dataG[p], b = dataB[p];
+                     Y[pos]= +0.29900f*r + 0.58700f*g + 0.11400f*b - 128;
+                     U[pos]= -0.16874f*r - 0.33126f*g + 0.50000f*b;
+                     V[pos]= +0.50000f*r - 0.41869f*g - 0.08131f*b;
+                  }
+               }
 
-            DCY = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, YDU, fdtbl_Y, DCY, YDC_HT, YAC_HT);
+               DCY = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, Y, 8, fdtbl_Y,  DCY, YDC_HT, YAC_HT);
-            DCU = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, UDU, fdtbl_UV, DCU, UVDC_HT, UVAC_HT);
+               DCU = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, U, 8, fdtbl_UV, DCU, UVDC_HT, UVAC_HT);
-            DCV = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, VDU, fdtbl_UV, DCV, UVDC_HT, UVAC_HT);
+               DCV = stbiw__jpg_processDU(s, &bitBuf, &bitCnt, V, 8, fdtbl_UV, DCV, UVDC_HT, UVAC_HT);
+            }
          }
       }
 
@@ -1512,7 +1606,7 @@ static int stbi_write_jpg_core(stbi__write_context *s, int width, int height, in
 
 STBIWDEF int stbi_write_jpg_to_func(stbi_write_func *func, void *context, int x, int y, int comp, const void *data, int quality)
 {
-   stbi__write_context s;
+   stbi__write_context s = { 0 };
    stbi__start_write_callbacks(&s, func, context);
    return stbi_write_jpg_core(&s, x, y, comp, (void *) data, quality);
 }
@@ -1521,7 +1615,7 @@ STBIWDEF int stbi_write_jpg_to_func(stbi_write_func *func, void *context, int x,
 #ifndef STBI_WRITE_NO_STDIO
 STBIWDEF int stbi_write_jpg(char const *filename, int x, int y, int comp, const void *data, int quality)
 {
-   stbi__write_context s;
+   stbi__write_context s = { 0 };
    if (stbi__start_write_file(&s,filename)) {
       int r = stbi_write_jpg_core(&s, x, y, comp, data, quality);
       stbi__end_write_file(&s);
@@ -1534,6 +1628,15 @@ STBIWDEF int stbi_write_jpg(char const *filename, int x, int y, int comp, const
 #endif // STB_IMAGE_WRITE_IMPLEMENTATION
 
 /* Revision history
+      1.16  (2021-07-11)
+             make Deflate code emit uncompressed blocks when it would otherwise expand
+             support writing BMPs with alpha channel
+      1.15  (2020-07-13) unknown
+      1.14  (2020-02-02) updated JPEG writer to downsample chroma channels
+      1.13
+      1.12
+      1.11  (2019-08-11)
+
       1.10  (2019-02-07)
              support utf8 filenames in Windows; fix warnings and platform ifdefs
       1.09  (2018-02-11)
@@ -1566,7 +1669,7 @@ STBIWDEF int stbi_write_jpg(char const *filename, int x, int y, int comp, const
              add HDR output
              fix monochrome BMP
       0.95 (2014-08-17)
-		       add monochrome TGA output
+             add monochrome TGA output
       0.94 (2014-05-31)
              rename private functions to avoid conflicts with stb_image.h
       0.93 (2014-05-27)

test_runner.py

@@ -1,7 +1,5 @@
 #!/usr/bin/env python
 
-# Assume python 2.6 or 2.7
-
 import glob
 import os
 import subprocess

tests/issue-416.gltf

@@ -0,0 +1 @@
+{"images":[{"uri":"%!QAAAQAAA5"}],"asset":{"version":""}}

tests/tester.cc

@@ -16,10 +16,10 @@
 #include <sstream>
 #include <fstream>
 
-static JsonDocument JsonConstruct(const char* str)
+static tinygltf::detail::JsonDocument JsonConstruct(const char* str)
 {
-  JsonDocument doc;
+  tinygltf::detail::JsonDocument doc;
-  JsonParse(doc, str, strlen(str));
+  tinygltf::detail::JsonParse(doc, str, strlen(str));
   return doc;
 }
 
@@ -275,9 +275,9 @@ TEST_CASE("parse-integer", "[bounds-checking]") {
 
     err.clear();
     {
-      JsonDocument o;
+      tinygltf::detail::JsonDocument o;
       double nan = std::numeric_limits<double>::quiet_NaN();
-      tinygltf::JsonAddMember(o, "int", json(nan));
+      tinygltf::detail::JsonAddMember(o, "int", tinygltf::detail::json(nan));
       CHECK_FALSE(tinygltf::ParseIntegerProperty(
         &result, &err, o,
         "int", true));
@@ -321,9 +321,9 @@ TEST_CASE("parse-unsigned", "[bounds-checking]") {
 
     err.clear();
     {
-      JsonDocument o;
+      tinygltf::detail::JsonDocument o;
       double nan = std::numeric_limits<double>::quiet_NaN();
-      tinygltf::JsonAddMember(o, "int", json(nan));
+      tinygltf::detail::JsonAddMember(o, "int", tinygltf::detail::json(nan));
       CHECK_FALSE(tinygltf::ParseUnsignedProperty(
         &result, &err, o,
         "int", true));
@@ -392,27 +392,105 @@ TEST_CASE("pbr-khr-texture-transform", "[material]") {
 
 TEST_CASE("image-uri-spaces", "[issue-236]") {
 
-  tinygltf::Model model;
   tinygltf::TinyGLTF ctx;
   std::string err;
   std::string warn;
 
   // Test image file with single spaces.
-  bool ret = ctx.LoadASCIIFromFile(&model, &err, &warn, "../models/CubeImageUriSpaces/CubeImageUriSpaces.gltf");
+  {
-  if (!err.empty()) {
+    tinygltf::Model model;
-    std::cerr << err << std::endl;
+    bool ret = ctx.LoadASCIIFromFile(
-  }
+        &model, &err, &warn,
+        "../models/CubeImageUriSpaces/CubeImageUriSpaces.gltf");
+    if (!warn.empty()) {
+      std::cerr << warn << std::endl;
+    }
+    if (!err.empty()) {
+      std::cerr << err << std::endl;
+    }
 
-  REQUIRE(true == ret);
+    REQUIRE(true == ret);
+    REQUIRE(warn.empty());
+    REQUIRE(err.empty());
+    REQUIRE(model.images.size() == 1);
+    REQUIRE(model.images[0].uri.find(' ') != std::string::npos);
+  }
 
   // Test image file with a beginning space, trailing space, and greater than
   // one consecutive spaces.
-  ret = ctx.LoadASCIIFromFile(&model, &err, &warn, "../models/CubeImageUriSpaces/CubeImageUriMultipleSpaces.gltf");
+  tinygltf::Model model;
+  bool ret = ctx.LoadASCIIFromFile(
+      &model, &err, &warn,
+      "../models/CubeImageUriSpaces/CubeImageUriMultipleSpaces.gltf");
+  if (!warn.empty()) {
+    std::cerr << warn << std::endl;
+  }
   if (!err.empty()) {
     std::cerr << err << std::endl;
   }
 
   REQUIRE(true == ret);
+  REQUIRE(warn.empty());
+  REQUIRE(err.empty());
+  REQUIRE(model.images.size() == 1);
+  REQUIRE(model.images[0].uri.size() > 1);
+  REQUIRE(model.images[0].uri[0] == ' ');
+
+  // Test the URI encoding API by saving and re-load the file, without embedding
+  // the image.
+  // TODO(syoyo): create temp directory.
+  {
+    // Encoder that only replaces spaces with "%20".
+    auto uriencode = [](const std::string &in_uri,
+                        const std::string &object_type, std::string *out_uri,
+                        void *user_data) -> bool {
+      (void)user_data;
+      bool imageOrBuffer = object_type == "image" || object_type == "buffer";
+      REQUIRE(true == imageOrBuffer);
+      *out_uri = {};
+      for (char c : in_uri) {
+        if (c == ' ')
+          *out_uri += "%20";
+        else
+          *out_uri += c;
+      }
+      return true;
+    };
+
+    // Remove the buffer URI, so a new one is generated based on the gltf
+    // filename and then encoded with the above callback.
+    model.buffers[0].uri.clear();
+
+    tinygltf::URICallbacks uri_cb{uriencode, tinygltf::URIDecode, nullptr};
+    ctx.SetURICallbacks(uri_cb);
+    ret = ctx.WriteGltfSceneToFile(&model, " issue-236.gltf", false, false);
+    REQUIRE(true == ret);
+
+    // read back serialized glTF
+    tinygltf::Model saved;
+    bool ret = ctx.LoadASCIIFromFile(&saved, &err, &warn, " issue-236.gltf");
+    if (!err.empty()) {
+      std::cerr << err << std::endl;
+    }
+    REQUIRE(true == ret);
+    REQUIRE(err.empty());
+    REQUIRE(!warn.empty());  // relative image path won't exist in tests/
+    REQUIRE(saved.images.size() == model.images.size());
+
+    // The image uri in CubeImageUriMultipleSpaces.gltf is not encoded and
+    // should be different after encoding spaces with %20.
+    REQUIRE(model.images[0].uri != saved.images[0].uri);
+
+    // Verify the image path remains the same after uri decoding
+    std::string image_uri, image_uri_saved;
+    (void)tinygltf::URIDecode(model.images[0].uri, &image_uri, nullptr);
+    (void)tinygltf::URIDecode(saved.images[0].uri, &image_uri_saved, nullptr);
+    REQUIRE(image_uri == image_uri_saved);
+
+    // Verify the buffer's generated and encoded URI
+    REQUIRE(saved.buffers.size() == model.buffers.size());
+    REQUIRE(saved.buffers[0].uri == "%20issue-236.bin");
+  }
 }
 
 TEST_CASE("serialize-empty-material", "[issue-294]") {
@@ -426,17 +504,48 @@ TEST_CASE("serialize-empty-material", "[issue-294]") {
   std::stringstream os;
 
   tinygltf::TinyGLTF ctx;
-  ctx.WriteGltfSceneToStream(&m, os, false, false);
+  bool ret = ctx.WriteGltfSceneToStream(&m, os, false, false);
+  REQUIRE(true == ret);
 
   // use nlohmann json
   nlohmann::json j = nlohmann::json::parse(os.str());
 
   REQUIRE(1 == j["materials"].size());
-  REQUIRE(j["asset"].is_null());
   REQUIRE(j["materials"][0].is_object());
 
 }
 
+TEST_CASE("empty-skeleton-id", "[issue-321]") {
+
+  tinygltf::Model model;
+  tinygltf::TinyGLTF ctx;
+  std::string err;
+  std::string warn;
+
+  bool ret = ctx.LoadASCIIFromFile(&model, &err, &warn, "../models/regression/unassigned-skeleton.gltf");
+  if (!err.empty()) {
+    std::cerr << err << std::endl;
+  }
+  REQUIRE(true == ret);
+
+  REQUIRE(model.skins.size() == 1);
+  REQUIRE(model.skins[0].skeleton == -1); // unassigned
+
+  std::stringstream os;
+
+  ret = ctx.WriteGltfSceneToStream(&model, os, false, false);
+  REQUIRE(true == ret);
+
+  // use nlohmann json
+  nlohmann::json j = nlohmann::json::parse(os.str());
+
+  // Ensure `skeleton` property is not written to .gltf(was serialized as -1)
+  REQUIRE(1 == j["skins"].size());
+  REQUIRE(j["skins"][0].is_object());
+  REQUIRE(j["skins"][0].count("skeleton") == 0);
+
+}
+
 #ifndef TINYGLTF_NO_FS
 TEST_CASE("expandpath-utf-8", "[pr-226]") {
 
@@ -453,3 +562,198 @@ TEST_CASE("expandpath-utf-8", "[pr-226]") {
 
 }
 #endif
+
+TEST_CASE("empty-bin-buffer", "[issue-382]") {
+  tinygltf::Model model;
+  tinygltf::TinyGLTF ctx;
+  std::string err;
+  std::string warn;
+
+  tinygltf::Model model_empty;
+  std::stringstream stream;
+  bool ret = ctx.WriteGltfSceneToStream(&model_empty, stream, false, true);
+  REQUIRE(ret == true);
+  std::string str = stream.str();
+  const unsigned char* bytes = (unsigned char*)str.data();
+  ret = ctx.LoadBinaryFromMemory(&model, &err, &warn, bytes, str.size());
+  if (!err.empty()) {
+    std::cerr << err << std::endl;
+  }
+  REQUIRE(true == ret);
+
+  err.clear();
+  warn.clear();
+
+  tinygltf::Model model_empty_buffer;
+  model_empty_buffer.buffers.push_back(tinygltf::Buffer());
+  stream = std::stringstream();
+  ret = ctx.WriteGltfSceneToStream(&model_empty_buffer, stream, false, true);
+  REQUIRE(ret == true);
+  str = stream.str();
+  bytes = (unsigned char*)str.data();
+  ret = ctx.LoadBinaryFromMemory(&model, &err, &warn, bytes, str.size());
+  if (err.empty()) {
+    std::cerr << "there should have been an error reported" << std::endl;
+  }
+  REQUIRE(false == ret);
+
+  err.clear();
+  warn.clear();
+
+  tinygltf::Model model_single_byte_buffer;
+  tinygltf::Buffer buffer;
+  buffer.data.push_back(0);
+  model_single_byte_buffer.buffers.push_back(buffer);
+  stream = std::stringstream();
+  ret = ctx.WriteGltfSceneToStream(&model_single_byte_buffer, stream, false, true);
+  REQUIRE(ret == true);
+  str = stream.str();
+  {
+    std::ofstream ofs("tmp.glb");
+    ofs.write(str.data(), str.size());
+  }
+
+  bytes = (unsigned char*)str.data();
+  ret = ctx.LoadBinaryFromMemory(&model_single_byte_buffer, &err, &warn, bytes, str.size());
+  if (!err.empty()) {
+    std::cerr << err << std::endl;
+  }
+  REQUIRE(true == ret);
+}
+
+TEST_CASE("serialize-const-image", "[issue-394]") {
+  tinygltf::Model m;
+  tinygltf::Image i;
+  i.width = 1;
+  i.height = 1;
+  i.component = 4;
+  i.bits = 8;
+  i.pixel_type = TINYGLTF_COMPONENT_TYPE_UNSIGNED_BYTE;
+  i.image = {255, 255, 255, 255};
+  i.uri = "image.png";
+  m.images.push_back(i);
+
+  std::stringstream os;
+
+  tinygltf::TinyGLTF ctx;
+  bool ret = ctx.WriteGltfSceneToStream(const_cast<const tinygltf::Model *>(&m), os, false,
+                             false);
+  REQUIRE(true == ret);
+  REQUIRE(m.images[0].uri == i.uri);
+
+  // use nlohmann json
+  nlohmann::json j = nlohmann::json::parse(os.str());
+
+  REQUIRE(1 == j["images"].size());
+  REQUIRE(j["images"][0].is_object());
+  REQUIRE(j["images"][0]["uri"].get<std::string>() != i.uri);
+  REQUIRE(j["images"][0]["uri"].get<std::string>().rfind("data:", 0) == 0);
+}
+
+TEST_CASE("serialize-image-callback", "[issue-394]") {
+  tinygltf::Model m;
+  tinygltf::Image i;
+  i.width = 1;
+  i.height = 1;
+  i.bits = 32;
+  i.image = {255, 255, 255, 255};
+  i.uri = "foo";
+  m.images.push_back(i);
+
+  std::stringstream os;
+
+  auto writer = [](const std::string *basepath, const std::string *filename,
+                   const tinygltf::Image *image, bool embedImages,
+                   const tinygltf::URICallbacks *uri_cb, std::string *out_uri,
+                   void *user_pointer) -> bool {
+    (void)basepath;
+    (void)image;
+    (void)uri_cb;
+    REQUIRE(*filename == "foo");
+    REQUIRE(embedImages == true);
+    REQUIRE(user_pointer == (void *)0xba5e1e55);
+    *out_uri = "bar";
+    return true;
+  };
+
+  tinygltf::TinyGLTF ctx;
+  ctx.SetImageWriter(writer, (void *)0xba5e1e55);
+  bool result = ctx.WriteGltfSceneToStream(const_cast<const tinygltf::Model *>(&m), os, false,
+                             false);
+
+  // use nlohmann json
+  nlohmann::json j = nlohmann::json::parse(os.str());
+
+  REQUIRE(true == result);
+  REQUIRE(1 == j["images"].size());
+  REQUIRE(j["images"][0].is_object());
+  REQUIRE(j["images"][0]["uri"].get<std::string>() == "bar");
+}
+
+TEST_CASE("serialize-image-failure", "[issue-394]") {
+  tinygltf::Model m;
+  tinygltf::Image i;
+  // Set some data so the ImageWriter callback will be called
+  i.image = {255, 255, 255, 255};
+  m.images.push_back(i);
+
+  std::stringstream os;
+
+  auto writer = [](const std::string *basepath, const std::string *filename,
+                   const tinygltf::Image *image, bool embedImages,
+                   const tinygltf::URICallbacks *uri_cb, std::string *out_uri,
+                   void *user_pointer) -> bool {
+    (void)basepath;
+    (void)filename;
+    (void)image;
+    (void)embedImages;
+    (void)uri_cb;
+    (void)out_uri;
+    (void)user_pointer;
+    return false;
+  };
+
+  tinygltf::TinyGLTF ctx;
+  ctx.SetImageWriter(writer, (void *)0xba5e1e55);
+  bool result = ctx.WriteGltfSceneToStream(const_cast<const tinygltf::Model *>(&m), os, false,
+                             false);
+
+  REQUIRE(false == result);
+  REQUIRE(os.str().size() == 0);
+}
+
+TEST_CASE("filesize-check", "[issue-416]") {
+
+  tinygltf::Model model;
+  tinygltf::TinyGLTF ctx;
+  std::string err;
+  std::string warn;
+
+  ctx.SetMaxExternalFileSize(10); // 10 bytes. will fail to load texture image.
+
+  bool ret = ctx.LoadASCIIFromFile(&model, &err, &warn, "../models/Cube/Cube.gltf");
+  if (!err.empty()) {
+    std::cerr << err << std::endl;
+  }
+
+  REQUIRE(false == ret);
+}
+
+TEST_CASE("load-issue-416-model", "[issue-416]") {
+
+  tinygltf::Model model;
+  tinygltf::TinyGLTF ctx;
+  std::string err;
+  std::string warn;
+
+  bool ret = ctx.LoadASCIIFromFile(&model, &err, &warn, "issue-416.gltf");
+  if (!warn.empty()) {
+    std::cout << "WARN:" << warn << std::endl;
+  }
+  if (!err.empty()) {
+    std::cerr << "ERR:" << err << std::endl;
+  }
+
+  // external file load fails, but reading glTF itself is ok.
+  REQUIRE(true == ret);
+}

tiny_gltf.cc

@@ -0,0 +1,4 @@
+#define TINYGLTF_IMPLEMENTATION
+#define STB_IMAGE_IMPLEMENTATION
+#define STB_IMAGE_WRITE_IMPLEMENTATION
+#include "tiny_gltf.h"

wasm/Makefile

@@ -0,0 +1,11 @@
+WASI_VERSION=16
+WASI_VERSION_FULL=${WASI_VERSION}.0
+
+WASI_SDK_PATH=$(HOME)/local/wasi-sdk-${WASI_VERSION_FULL}
+
+CC=${WASI_SDK_PATH}/bin/clang
+CXX=${WASI_SDK_PATH}/bin/clang++
+CXXFLAGS=-fno-rtti -fno-exceptions -g -Os
+
+all:
+	$(CXX) ../loader_example.cc $(CXXFLAGS) -I../

wasm/README.md

@@ -0,0 +1,31 @@
+Experimental WASI/WASM build
+
+## Build
+
+Download wasi-sdk https://github.com/WebAssembly/wasi-sdk
+
+Compile tinygltf without C++ exceptions and threads. See `Makefile` for details
+(NOTE: TinyGLTF itself does not use RTTI and threading feature(C++ threads, posix, win32 thread))
+
+## Build examples and Run
+
+Build `loader_example.cc`
+
+```
+$ /path/to/wasi-sdk-16.0/bin/clang++ ../loader_example.cc -fno-rtti -fno-exceptions -g -Os -I../ -o loader_example.wasi
+```
+
+Tested with wasmtime.  https://github.com/bytecodealliance/wasmtime
+
+
+Set a folder containing .gltf file to `--dir`
+
+```
+$ wasmtime --dir=../models loader_example.wasi ../models/Cube/Cube.gltf
+```
+
+## Emscripen
+
+T.B.W. ...
+
+EoL.